Normative References Categories
Normative References Test Equipment
-
Com-Power LI-150C Line Impedance Stabilization Network
SKU: sku-890
Weight: 25 lbs. / 11.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 50 Amps (AC), 35 Amps (DC)Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cmFrequency Range: 150 kHz to 30 MHz -
Com-Power LI-125C 150 kHz to 30 MHz Line Impedance Stabilization Network Pair
SKU: sku-881
Weight: 25 lbs. / 11.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 25 Amps (AC), 17 Amps (DC)Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cmFrequency Range: 150 kHz to 30 MHz -
3ctest APS 40C10 Automotive Battery & Pulse Simulator
SKU: 22867
Output Voltage: -40 to 40 Volts (.2V steps)Output Current: -10 to 10 AmpsProduct Overview (Video): ISO 16750-2 Electrical Load Tests using the APS SeriesFrequency Range: up to 300 kHzBandwidth Response: 100 kHzIN STOCK -
Ground Reference Plane for EMC/EMI Testing
SKU: sku-833
Material: Aluminum (Copper upon request)Dimensions: 9' by 6'In Stock -
Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network
SKU: 10827
Associated Equipment: RF Conducted Immunity Test SystemsApplication/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 16 AmpsDecoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB$195.00 - $495.00Typically In Stock -
Schloder M Type CDN's for Disturbance Signals to Unscreened Supply Lines (mains) AC + DC up to 1000V, 100A
SKU: sku-791
Application/Test Type: unscreened supply lines (mains) AC + DCCurrent Rating: 16A / 32A / 63 A / 100 ADimensions: 160 x 84,5 x 240mm or 200 x 122,5 x 400mm depending on modelFrequency Range: 150 kHz to 230 MHzMains & EUT Connections: banana sockets -
3 Phase EFT/Burst, Surge Combination Wave Test System
SKU: 1785
Application/Test Type: CE Marking, EMC Precompliance TestingBurst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Pulse amplitude: 0.2 – 5.0 kVPulse current (short circuit): 0.1 – 2.5 kA ±10% (8 us ±20% risetime)Rentals Ship Today -
EFT-DLC EFT/Burst Capacitive Coupling Clamp for Data Lines
SKU: 1780
Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)Built in Accordance to: IEC 61000-4-4Coupling Length: 1 m (39.4 in)Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)RF Connector: Fischer HV Connector$195.00 - $2,495.00In Stock -
CE Mark Product Package for IEC/EN 61000-4 Series Compliance
SKU: 12854
Applications: CE Marking, EMC Precompliance Testing, Conducted ImmunityHarmonized Standards: IEC/EN 61000-4-4, IEC 61000-4-5, IEC 61000-4-11Industries: Medical DevicesTest Setup: Conducted Immunity/Susceptibility Test SetupPeak inrush current capability: greater than 500 Amps$2,975.00 - $9,500.00IN STOCK -
Fischer Custom Communications F-203I-A-23MM, 10kHz - 1GHz, 100 Watts CW
SKU: sku-726
Weight: approx. 7 kgApplication/Test Type: Injects the disturbance signal through a combination of inductive and capacitive couplingConnector: N-type femaleDimensions: 610 x 75 x 135 mmFrequency Range: 10kHz - 1GHz -
California Instruments OMNI 1-18i Impedance Matching Network
SKU: 17109
- Ideal for IEC 61000-3-3 and IEC 61000-3-11 Flicker testing
- Built in compliance to TR/IEC 60725
Inquire for Lead Time -
Rent RF Conducted Immunity Test System per IEC 61000-4-6
SKU: 0699
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 100VrmsBCI Test Levels (w/ built-in amplifier): 30VIN STOCK