Standards Categories
Standards Test Equipment
-
Com-Power LI-125A 150 kHz - 30 MHz LISN, 50 uH, 25 Amps (Discontinued)
SKU: sku-12
Weight: 25 lbs. / 11.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 25 Amps (AC), 17 Amps (DC)Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cmFrequency Range: 150 kHz to 30 MHz -
Haefely DIP 116 Automatic Dips Transformer 16 Amps 40/70/80%
SKU: HAE-DIP116
Test Standards: IEC 61000-4-11Typically In Stock -
ESD Test Table
SKU: 11246
Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)Standards Met: IEC 60601-1-2, IEC 61000-4-2Table Dimensions: .8 meters (H)Table Top Ground Plane: 1.6m x .8m$1,750.00 - $4,950.00Typically Ships in 48-72 Hours -
LPA4G-80M High Power Log Periodic Antenna
SKU: 12445
Weight: 4.6 lb.'s (2.09 kg)Antenna Factor (1 Meter): 5 to 36 db/mApplication/Test Type: RF Radiated Susceptibility Testing, Radiated Emissions TestingDimensions: 56.3" x 72.3" (143cm x 183.6cm)Frequency Range: 80 MHz - 4 GHz$250.00 - $495.00In Stock -
EM Test TSS 500N4B Telecom Surge Generator
SKU: 9122
Applications: Telecom Testing, Conducted ImmunityTest Standards: Bellcore/Telcordia GR-1089-CoreWaveform: 10/250usOutput Voltage: 100 Volts to 4,000 VoltsOutput Current: 50 Amps to 2,000 Amps$1,950.00 - $37,500.00In Stock -
Schwarzbeck CDN M4PE 32A Coupling Decoupling Network
SKU: 6657
Frequency Range: 150 kHz to 230 MHzCommon Mode Impedance: 150 kHz – 24 MHz: 150 Ω ±20 Ω, 24 MHz–80 MHz: 150 Ω +60 Ω/-45 Ω, 80 MHz–230 MHz: 150 Ω ±60 ΩMax. RF Test Voltage: 30 VRF Input Power: 6 WInput voltage EuT (AE): Line to ground / line to line: 500 VAC / 1000 VDC, 1000 VAC / 2000 VDC$295.00 - $3,095.00Typically In Stock -
Schwarzbeck CMDM 8700 B Common Mode / Differential Mode Switch
SKU: 8564
Frequency Range: 9 kHz – 108 MHzConnector: BNCImpedance of Line A, Line B and output port: 50 ΩVoltage division factor at the measuring port: -20 dB +/-3 dBApplications: Radiated Emissions$2,775.00Typically in Stock -
VCP-FS Vertical Coupling Plane with Voltage Bleeding Cable
SKU: 4378
Standards Met: IEC 61000-4-2Applications: Conducted Immunity, Electrostatic Discharge Immunity TestVCP Aluminum Size: 50 x 50 cm / 19.7 x 19.7 inVoltage Bleeding Cable: Includes two 470kΩ resistorsHeight: 1.5m/4.9 ft or 2.25m/7.3 ftIn Stock -
3ctest EDS 10IC HBM/MM Electrostatic Discharge Simulator
SKU: 6980
Output Voltage: HBM 5~8000V 5%+5V; MM 5~1000V 5%+5VPolarity: Positive, Negative, AlternateTime Interval: 0.1 - 10s adjustableTrigger Mode: Automatic, single or external triggerPower Supply: AC100 ～ 240V +/-10% 50/60HzIN STOCK -
Typically In Stock -
CDN 418CAN Data & Control Line Coupling Decoupling Network
SKU: 55116
Coupled Waveform: Damping oscillation wave at 100 kHz/1 MHzPulse Voltage: ≥3 kVCoupling Mode: CAN H+CAN L simultaneous ground/LIN groundCommunication Frequency: <5 MHzData Rate: CAN 10MBit/s, LIN 100 KBit/sInquire for Availability -
AE Techron DSR 400 Aviation AC and DC Power Test System
SKU: 44556
Test Standards: DO 160 Section 16 (115V, 14VDC, 28VDC) and MIL STD 704Operation: 4-quadrant, bi-polar operationOutput Rise Time: <30 µSRemote Control: GPIP, LANConnectors: High Power Plug/JackInquire for Availability