Standards Categories
Standards
-
Schwarzbeck FMZB 1519 C Active Magnetic Loop Antenna
SKU: 8581
Frequency Range: 9 kHz - 30 MHzAntenna Factor for fict. E - field strength: 20 dB/mAntenna Factor for H - field strength: -31.5 dB/ΩmLoop Diameter: 0.5 mFrequency Response: < +/- 1 dB$495.00Typically in Stock -
ALA30M Active Loop Antenna for Magnetic Field Testing
SKU: 4465
Frequency Range: 1 kHz - 30 MHzLoop Diameter: 12"Battery Life: ~20 HoursCharge Time: ~10 HoursImpedance: 50 Ω$195.00 - $3,079.00IN STOCK -
Haefely MAG 1000 AC Magnetic Field Generator per IEC 61000-4-8
SKU: 1897
Test Standards: IEC 61000-4-8Max Continuous Field Strength: 1 - 120 A/mShort Duration Levels: Up to 1000A/mTest Times: 1 min to 8 HoursIn Stock -
Narda NIM-511 Electric and Magnetic Field Meter
SKU: 856
Frequency Range: 100 kHz to 100 MHzElectric Field Measurement Range: 0.1 to 100 mW/cm2 (20 to 614 V/m)Magnetic Field Measurement Range: 0.2 to 200 mW/cm2 (0.073 to 2.3 A/m)Inquire for Availability -
3ctest AutoLab Conducted Immunity Transient Software for Automotive Testing
SKU: 11836
System Requirements: Windows 7, Windows 8, Windows 10 and Windows 11Supported Communication Interfaces: USB, EthernetFeatures: Easy to Use GUI, Custom Waveform Generation, Remote Control, Test sequence and scheduling, ReportingIn Stock -
PMM 1008 Magnetic Field Generator with Loop Antenna, 1200 A, 50/60 Hz, IEC/EN 61000-4-8
SKU: 21489
Weight: 57,3 kgDimensions: 550 x 2000 x 650 mmOperating Temperature: -10 °C to +40 °CSupply Voltage: 230 Vac ± 10 % - 50/60 Hz, 16 A maxInquire for Availability -
Narda PMM 7010 EMI Test Receiver
SKU: 10025
Frequency Range: 9 kHz to 3 GHzApp Note: Differences Between EMI Test Receivers and Spectrum Analyzers, Precompliance conducted emissions,Detectors: Peak, Quasi-Peak, Average, RMS, RMS-Avg (optional), C-Avg, Smart Detector functionPre-programmed Test Limits: CISPR 11, CISPR 22Sweep/Test Speed: Slow$495.00 - $2,375.00IN STOCK -
EMI-AK40G Antenna Kit for EMI Radiated Emissions & Immunity Testing
SKU: 12112
Frequency Range: 20 Hz to 40 GHzIncludes: Log, Biconical, Monopole, Passive Loop, Dual Ridge, Quad Ridge, Current ProbesTest Standards: FCC Part 15, MIL-STD-461, IEC 61000-6-3, IEC 61000-6-4Applications: EMC Precompliance Testing, Radiated Emissions, TEMPEST TestingIn Stock -
AE Techron CIS-25 Aviation Conducted/Induced Susceptibility Test Kit
SKU: 45223
Applications: Military EMC Testing, Aerospace, Aircraft And Aviation EMC TestingTest Standards: Airbus ABD0100.1.8, Boeing-D6-36440E, DO160 Section 18, DO160G Section 19, MIL STD 461 CS101, MIL STD 1275E, IEC 61000 4-19Output Current: 0A to 25A continuousBandwidth: Full Signal: DC to 300 kHz; Small Signal: 3Vp-p to 1 MHzOutput Voltage Range: –80V to +80VTypically In Stock -
3cTest SEPN 38100T Surge/EFT 3 Phase Coupling Network
SKU: 7271
EUT Load Capacity (AC): 380V, 100 A, 50 Hz/60 Hz three-phase-five-wireEUT Load Capacity (DC): 450 V, 100 AFuse: 6 AMax Power Consumption: 200 WDimensions: 600 x 800 x 1830 mm (W x D x H) 23.6 x 31.5 x 72 inIn Stock -
Elektro-Automatik PS 11500-30 Programmable High Efficiency DC Power Supply 1500 V
SKU: 7287
Voltage range: 0-1500 VCurrent Range: 0 -30 AResistance Range: 1.7 Ω - 3000 ΩOutput Capacitance: 60 µFFrequency Range: 45 - 65 Hz$1,400.00 - $14,000.00In Stock -
EMC Partner MIL3000 MG3 Impulse Test System for CS115 & CS116
SKU: 51331
Applications: RF Current Monitoring, EMC BCI TestsMax EUT Current: 150 Amps @50/60Hz, 20 Amps @400HzMax Cable Diameter: <5 cmIndustry Overview: Military EMC TestingInquire for Availability