RF Interference Analyzers & Scanners

RF Interference Analyzers & Scanners Test Equipment, Systems & Solutions

• 

  Wavecontrol SMP3 RF Field Meter

  SKU: 8899

  Frequency Range: DC to 60 GHz

  Battery Life: >24 Hours

  Readout Values: Total field (instantaneous, max., min. and average) Field components (X, Y, Z)

  Measurement Range: 0.2 - 1000 V/m

  High Pass Filters: 1 Hz, 10 Hz, 25 Hz and 100 Hz

  Probe Selection: E & H Field (DC - 60 GHz)

  More Features: Long and Short Term Recoding Options, Peak and RMS, Many more.

  Typically In Stock

  View Product Cart

• 

  Narda NBM-550 Broadband Field Meter, 100 kHz - 60 GHz

  SKU: 11612

  Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

  Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh

  Dimensions: 19.5 mm in height

  Frequency Range: 100 kHz - 60 GHz

  Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)

  Recharging Time: 2 hours

  Videos: Software Setup

  Typically In Stock

  View Product Cart

• 

  Narda NBM-520 Broadband Field Meter, 100 kHz - 90 GHz

  SKU: 6278

  Measurement Units: V/m, A/m, mW/cm² or W/m², % for shaped probes

  Battery Life: 20 hours

  Recharging Time: 2 hours

  Calibration Status: NIST (5/22/2023)

  PC Interface: Fiber Optic via USB (6 ft cable)

  Software: NBM-TS, Tile, EMCWare, EMC32

  Videos: Software Setup

  Compatible Probes: See

  In Stock

  View Product View Product

• 

  Narda FieldMan 0 Hz to 90 GHz All-in-One Electromagnetic Field Meter

  SKU: 12955

  Frequency Range: 0 Hz/1 Hz/100 kHz to 90 GHz

  Logging Info: Temperature, Humidity, Air Preassure, Geolocation, Distance to Ground

  Electric Field Units: V/m, mW/cm2 , W/m2 , % of standard (depending on the connected probe)

  Magnetic Field Units: A/m, Tesla, Gauss, mW/cm2 , W/m2 , % of standard (depending on the connected probe)

  Compliance Standards: 2013/35/EU, IEC/EN 62311, ICNIRP 1998, ICNIRP 2010, IEC/EN 62233, GB-8702-2014, EMFV 2016

  Industry Standards: IEC / EN 62232, IEC 62577, EN 50519 g. IEC / EN 62233, IEC / EN 62822, EN 50500, IEC 62764, IEC/EN 62110, IEC/EN 60601

  Applications: Radiated Emissions, EMC Radiated Immunity in a Test Chamber

  Battery Life: 16 Hours (2-4 Hour Recharge)

  Operating Modes: Field Strenght, Aptial Agerage, Timer logging, Spectrum/FFT Analysis, Shaped Time Domain assessment, Scope

  Cost New:

  Was:

  Price Now:

  $495.00

  Typically In Stock

  Ordering Options

• 

  Wavecontrol SMP2 Broadband Field Strength Meter

  SKU: 7056

  Weight: 10.6 oz.

  Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

  Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh

  Dimensions: 1.5 x 2.0 x 8 inches

  Frequency Range: 100 kHz - 60 GHz

  Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)

  Recharging Time: 2 hours

  Standards Met: IEC 61000-4-3

  IN STOCK

  View Product Cart

• 

  Narda NIM-511 Electric and Magnetic Field Meter

  SKU: 856

  Frequency Range: 100 kHz to 100 MHz

  Electric Field Measurement Range: 0.1 to 100 mW/cm2 (20 to 614 V/m)

  Magnetic Field Measurement Range: 0.2 to 200 mW/cm2 (0.073 to 2.3 A/m)

  Inquire for Availability

  View Product Cart

• 

  Anritsu MS2090A Real-time Handheld Spectrum Analyzer

  SKU: 8840

  Frequency Range: 9 kHz - 43.5 GHz

  Analysis Bandwidth: 110 MHz

  Resolution bandwidth (RBW): 1 Hz to 10 MHz

  Real-Time Spectrum Analysis bandwidth:: 22, 55, 110 MHz (option dependent)

  Amplitude Accuracy: ± 0.5 dB, typical

  Standard Cable Length: 1 Meter

  Applications: RF Interference Analysis and EMF Sniffing and Much More

  Cost New:

  Was:

  Price Now:

  $1,895.00

  Typically In Stock

  Ordering Options

• 

  Narda EFD-5091 50 GHz E-Field Probe

  SKU: 84851

  Measurement Range: 8 to 614 V/m (True RMS)

  Frequency Range: 300 MHz to 50 GHz

  Sampling Rate: 5 Hz / 270 ms

  Isotropic Deviation: ±1 dB (0.6 GHz to 8 GHz), ±1.4 dB (8 GHz to 45.5 GHz)

  In Stock

  View Product Cart

• 

  Narda EFD-9091 E-Field Probe 100 MHz to 90 GHz

  SKU: 8485

  Measurement Range: 0.5 to 400 V/m (CW), Typ. 0.5 to 61.4 V/m (True RMS)

  Dynamic Range: 58 dB (nominal)

  Flatness: ±3 dB (300 MHz to 40 GHz), +3/-6 dB (100 MHz to 60 GHz)

  Isotropic Deviation: ±1.25 dB (100 MHz to 10 GHz), ±2 dB (>10 GHz to 26.5 GHz)

  Applications: Radio link, telecommunications, satellite, and radar

  In Stock

  View Product Cart

• 

  Narda EFD-1891 E-Field Probe 2 MHz - 18 GHz

  SKU: 7202

  Measurement Range: 0.6 to 800 V/m (CW), 0.6 to 65 V/m typ. (True RMS)

  Dynamic Range: 62.5 dB (nominal)

  Flatness: +1/-1.5 dB (10 MHz to 3 GHz), +2/-1.5 dB (>3 GHz to 11 GHz)

  Isotropic Deviation: ±1 dB (10 MHz to 5 GHz), ±2.25 dB (> 5 GHz to 18 GHz)

  Applications: Broadcasting, telecommunications, and satellite

  In Stock

  View Product Cart

• 

  Wavecontrol WPF3-HP 100 kHz - 3 GHz E-Field Probe

  SKU: 12068

  Field Strength Range: 0.2 - 1,000 V/m

  Application/Test Type: Monitoring electric field strengths

  Videos: Menu Run-Through

  Frequency Range: 100 kHz - 3 GHz

  Typically In Stock

  View Product Cart

• 

  EMF & RF Selective Frequency Analyzer Kit

  SKU: 18505

  Frequency Range: 10 MHz to 18 GHz

  Resolution Bandwidths: 100 Hz to 1 MHz

  Detectors: sample, max/min peak, auto peak, RMS

  Reference Level: –80 dBm to +20 dBm

  Applications: RF Interference Analysis and EMF Sniffing

  Cost New:

  Was:

  Price Now:

  $975.00

  In Stock

  Ordering Options