Rent, buy or lease test equipment built according to the IEC/EN normative referenced in product certification standards. The EMC Shop supplies the equipment for CE, UL, FCC, TUV, CSA and other product marks for your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.IEC/EN Standards Categories
IEC/EN Standards
-
RF Conducted Immunity Testing to IEC 61000-4-6
SKU: 11955
Injection Methods: BCI probes, EM Clamps, CDN's, ISN's, DPI, TWCRadiation Measurements: V/m, mATest Levels: Up to 50 V/m or 400 mAFrequency Range: (4) 150 kHz - 230 MHz (1 GHz) -
Configurable Radiated Immunity Test Rack
SKU: 10019
Frequency Range: 2 MHz - 40 GHzCW Field Strength Levels (@ 3m): 100V/mCW Field Strength Levels (@ 1m): 200 V/mTest Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20Test Setup: Radiated Immunity & SusceptibilityImmediate Shipping Available -
RFCI-MIL Radiated & Magnetic Immunity Generator
SKU: 11915
Application/Test Type: Bulk Current Injection (BCI) Testing, Conducted Susceptibility TestingFrequency Range: 10 kHz - 250 MHzConnectors: EUT Monitors, N type, SMA and BNC, Ethernet, USBStandards Met: IEC 61000-4-39MIL-STD-461 CS114, IEC 60601-1-2AC Power Input: 100 to 240 V 50/60 HzTypically In Stock -
Schwarzbeck HHS 5210 Helmholtz Coil for IEC 61000-4-8
SKU: 8952
Number of Turns Per Coil: 10Max. Coil Current: 20 A, 5 minutesNominal Coil Current: 10 A, continuousMaximum Magnetic Field Strength: 300 A/m, 5 minutesNominal Magnetic Field Strength: 150 A/m, continuousIn Stock -
Schwarzbeck CMDM 8700 Common Mode / Differential Mode Switch
SKU: 11226
Frequency Range: 9 kHz – 30 MHzConnector: BNCImpedance of Line A, Line B and output port: 50 ΩVoltage division factor at the measuring port: (0 … - 2) dBTypically in Stock -
-
3ctest PFS Single Phase Power Fail Simulator
SKU: 21108
EUT max. Voltage: 55V - 300VEUT max. current: 6A - 55ADip Voltage & Variation Levels: 0% through 100%Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: EMC Precompliance Testing, Conducted Immunity4-6 Weeks -
3ctest MFS Series Power Frequency Magnetic Field Simulator
SKU: 17101
- Electronic magnetic relay protection if voltage and current is more than rated value
- Programmable setup for test voltage, polarity and phase sync angle by software to save time
- Programmable pulse intervals, test duration and temperature protection
Continuous Magnetic Field Strength Levels: 1 A/m – 300 A/mInquire for Availability -
LFCI4-16/19 Test Generator for Common and Differential Mode Disturbances
SKU: 11995
Test Standards: IEC 61000-4-16, IEC 61000-4-19Frequency Range: DC, 0.05Hz - 300 kHz; resolution 0.05 HzSlew Rate: 100 V/µsInternal Power Amplifier: 250 WattsTypically In Stock -
Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6
SKU: sku-921
Weight: 17 kg (37.5 Pounds)Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applicationsDimensions: 19"/3 HUFrequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHzImpedance: 50 Ohms -
3 Phase EFT/Burst, Surge Combination Wave Test System
SKU: 1785
Application/Test Type: CE Marking, EMC Precompliance TestingBurst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Pulse amplitude: 0.2 – 5.0 kVPulse current (short circuit): 0.1 – 2.5 kA ±10% (8 us ±20% risetime)Rentals Ship Today -
EFT-DLC EFT/Burst Capacitive Coupling Clamp for Data Lines
SKU: 1780
Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)Built in Accordance to: IEC 61000-4-4Coupling Length: 1 m (39.4 in)Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)RF Connector: Fischer HV Connector$195.00 - $2,495.00In Stock