IEC/EN 61000-4-X Test Rack for Conducted Immunity Certification

IEC/EN 61000-4-X Test Rack for Conducted Immunity Certification

Condition:
Used
Test Capabilities:
Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations
Standards Met:
IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-12
Applications:
Electrical Transient and Noise, Surge Immunity, Power Failures
Test Setup:
Conducted Immunity/Susceptibility Test Setup
Max EUT Power:
600 Voltas @ 100 Amps
Peak inrush current capability:
500 A (at 230 V)
EFT/Burst Pulse Output Capability:
4.8 kV
Combination/Wave Surge Output Capability:
4.4 kV (in 1 V steps)
Generic Standards:
IEC 61000-6-1, IEC 61000-6-2
Manufacturer:
EM Test
Online Orders Ship Same Day

 

Availability:

Inquire for Availability

SKU:
11195

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

Complete IEC/EN Test Rack for CE Marking and Conducted Immunity Certification and More offers product sets for your EMC precompliance measurements, which include all necessary instruments to analyze typical EMC problems. Depending on your requirements, you can choose.

IEC/EN Test Rack for CE Marking Includes:

  • VCS 500M10 10kV Combination Wave Surge Simulator
  • TSS 500M10 Telecom Surge Generator
    • 10 / 700us pulse according to IEC/EN 61000-4-5
    • Test voltage up to 10kV
    • Compliant with ITU-T standard for enhanced test level
    • Complies with FCC part 68 (Surge B pulses)
  • CWS 500 Continuous Wave Simulator
    • RF Conducted Simulator 150kHz to 230 MHz per IEC/EN 61000-4-6
    • Built-in dual directional coupler
    • Automatic calibration via built-in power meter
  • EFT 500 Electrical Fast Transient Generator
  • PFS 500 Voltage Dips and Drop Interruptions


Not only do unexpected results in test labs during EMC compliance measurements translate into extra costs, quite often they also cause a substantial delay for your project. Rohde & Schwarz offers effective and cost- efficient tools for EMC precompliance measurements which allow you to successfully prevent possible surprises before the actual onset of a problem.

Set includes

TSS 500M10 Telecom Surge Generator
  • Standalone tester for 10 / 700us pulse according to IEC 61000-4-5
  • Test voltage up to 10kV
  • Compliant with ITU-T standard for enhanced test level
  • Complies with FCC part 68 (Surge B pulses)
  • Integrated CDNs for 2-wire and 4-wire applications
  • Manual operation
  • Standard test procedures
  • RS232 and GPIB interfaces

CWS 500 Continuous Wave Simulator
  • Test procedure acc. IEC 61000-4-6 Ed. 4
  • Built-in amplifier saturation and linearity check
  • Built-in amplifier, 10 kHz to 400 MHz
  • Built-in power meter, 9 kHz to 1 GHz
  • Built-in dual directional coupler
  • Automatic calibration via built-in power meter
  • Connection for external amplifiers up to 1 GHz
  • USB-Interface
  • Software for Windows 7, Windows 8

PFS 200N Series Voltage Dips and Drop interruptions
  • Standalone test generator for voltage dips and interruptions
  • Rise/fall time <1us
  • Electronic short-circuit protection
  • Rated voltage 80V DC
  • Front panel operation
  • Standard Test routines
  • USB and GPIB interfaces

EFT 500N5 / N8 Series EFT/burst generator pulse 5/50ns
EFT 500N5
EFT 500N5.1 / .2 / .3 / .4 / .5 / .6/ .7/ .8
EFT 500N8
EFT 500N8.1 / .2
  • 10,000 Pulses/sec.
  • 4.8kV Burst Voltage
  • Spike Frequency up to 1MHz
  • Built-in 1ph or 3ph coupler up to 50A
  • Pulse Verification acc. to Ed.3 on each coupling path

CNI 503 / CNI 501 Coupling Decoupling Network
  • Combined coupler for EFT/Burst and Surge testing
  • Surge as per ANSI/IEEE C62.41 (models CNI 501Bx only, other couplers on request)
  • LEDs indicate active mode and coupling
  • Automatic selection of Surge impedance
  • Fully remote controlled by EM TEST generators
  • Meet requirements up to 1,000V DC

Videos

Key Considerations

Manufacturer:
EM Test
Test Capabilities:
Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations
Standards Met:
IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-12
Applications:
Electrical Transient and Noise, Surge Immunity, Power Failures
Test Setup:
Conducted Immunity/Susceptibility Test Setup
Max EUT Power:
600 Voltas @ 100 Amps
Peak inrush current capability:
500 A (at 230 V)
EFT/Burst Pulse Output Capability:
4.8 kV
Combination/Wave Surge Output Capability:
4.4 kV (in 1 V steps)
Generic Standards:
IEC 61000-6-1, IEC 61000-6-2

Related EMC Equipment & Solutions

EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test

EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test

SKU: 7851

Standards: EN/IEC 61000-4-6
Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling
Clamp factor (CF): -.5 dB at 100 kHz to -4 dB at 1 GHz (Min -7 dB at 700 MHz
Connector: N-type female
Dimensions: 632 mm x 120 mm x 80 mm
Frequency Range: 10 kHz to 1000 MHz
Max. Cable Diameter: 20 mm
Maximum Continuous Power: 0.15 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min
$595.00
Typically In Stock
Ordering Options
Teseq NSG 4070C-35 Test System for Conducted RF Immunity to IEC 61000-4-6

Teseq NSG 4070C-35 Test System for Conducted RF Immunity to IEC 61000-4-6

SKU: 10548

Test Capabilities: RF Conducted Immunity
Standards Met: IEC/EN 61000-4-6, MIL-461 CS114, ISO 11452-4
CDN Test Levels (w/ built-in amplifier): 30Vrms
BCI Test Levels (w/ built-in amplifier): 200mA
Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz
$19,500.00
Typically In Stock

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form