Solar 2714-106R Overview
The EMC Shop is an ISO 17025 accredited company and one of the leading suppliers for miliary and aerospace EMC test equipment. Rentals can be delivered the next day, purchases ship in 3-5 days if in stock, alternatively customers will opt to be put on a waitlist for the next system that returns from rental.
The Solar 6512-106R High Power Feed-Thru Capacitor has current handling ability up to 500 amps and voltage handling up to 1,200 volts DC.
APPLICATION
Starting with the Solar Type 6512-106R Feed-Thru Capacitor, Solar Electronics has a series of 10 μF feed-thru capacitors which are specially designed to be used in RFI/EMI test setups such as MIL-STD-461A/462A. Many other specifications, such as RTCA DO-160G, now call for their use. In this application the capacitor provides a low RF impedance across the power source so that EMI currents produced by the equipment under test can be accurately measured with a current probe.
The feed-thru capacitor is used for added filtering in conjunction with line impedance stabilization networks. The 10 µF feed-thru capacitor can also be used as a power-line filter installed in the wall of a shielded enclosure or equipment cabinet. The capacitor provides adequate insertion loss without suffering the power current saturation limitation of conventional filters which employ toroidal inductors.
[split]
| Solar Type 6512-106R Specifications | |
| Capacitance | 10 µF |
| Tolerance | ±10% |
| Temperature | -55°C to +70°C @ rated voltage +105°C @ 50% of rated voltage |
| Dissipation factor | Less than 1% at 25°C (measured at 120 Hz) |
| Dielectric strength | Twice the rated VDC @ 25°C for two minutes |
| Insulation resistance | 2500 MΩ @ 25°C rated voltage for two minutes. (Insulation resistance greater than 500 kΩ cannot be measured due to the internal bleeder resistor) |
| Bleeder resistor | A minimum 500 kΩ resistor included as specified in SAE document ARP-936 |
| Life test | Will withstand the rated DC voltage @ 85°C for 250 hours |
| Construction | Extended foil coaxial winding protected with a thin polyester film |
FIGURES
| TABLE 1 - CURRENT AND VOLTAGE RATINGS | ||||
| TYPE NUMBER | A | 60 Hz | 400 Hz | VDC |
| 6512-106R | 100 | 275 | 250 | 600 |
| 7314-106R | 100 | 300 | 277 | 800 |
| 2714-106R | 500 | 500 | 270 | 1200 |
| 2812-106R* | 175 | 500 | 270 | 1200 |
