Teseq MD 102A ESD Pulse Measurement Target for IEC/EN 61000-4-2

Teseq MD 102A ESD Pulse Measurement Target for IEC/EN 61000-4-2

Condition:
New
Manufacturer:
Teseq
Online Orders Ship Same Day

 

Availability:

Inquire for Lead Time

SKU:
sku-887

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

  • ESD measurement target conforming to IEC/EN 61000-4-2
  • gold plated,
  • type N-female connector
  • Target for precise ESD pulse measurements
  • Very small insertion loss variation
  • Precise gold plated construction

Videos

Key Considerations

Manufacturer:
Teseq

Related EMC Equipment & Solutions

EFT/Burst & ESD Rental Package for IEC 61000-4-2 and IEC 61000-4-4

EFT/Burst & ESD Rental Package for IEC 61000-4-2 and IEC 61000-4-4

SKU: sku-669

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4
Burst frequency: 1 Hz to 2 MHz
Burst time: 0.01 to 999 ms
Coupling: Built-in Single Phase 250 Volts AC / 110 Volts DC and 16 Amps
Polarity: positive, negative, alternating
Pulse amplitude: 0.10 - 4.5 kV
Repetition time: 0.1 to 400 Hz or 2.5 ms to 10 s or 1 to 500 period
Standards Met: IEC/EN 61000-4-4
Test duration: Impulses per burst 1000 max Impulses per second 12000 max
$1,595.00
In Stock
Ordering Options
Teseq NSG 3025 Fast Transient/EFT Generator for IEC/EN 61000-4-4

Teseq NSG 3025 Fast Transient/EFT Generator for IEC/EN 61000-4-4

SKU: 11993

Standards Met: IEC/EN 61000-4-4
Applications: EMC Precompliance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT
Max EUT AC Voltage / Current (w/ Built in CDN): 250 Volts, 16 Amps
Max EUT DC Voltage / Current (w/ Built in CDN): 120 Volts, 16 Amps
EFT/Burst Pulse Output Capability: 4.8 kV
External Coupling: Data Lines
Was:
$9,500.00
$7,500.00
In Stock
EM Test Dito ESD Simulator up to 16.5 kV for IEC/EN 61000-4-2 - The EMC Shop

EM Test Dito ESD Simulator up to 16.5 kV for IEC/EN 61000-4-2

SKU: sku-645

Voltage Range: 500V - 16,500V +/-5%
Electrostatic Discharge: Pulse conforms to IEC 61000-4-2 edition 2
Holding Time: More than 5 seconds
Resolution: 100V steps
Rise Time: 0.8ns +/- 25%
Supply Voltage: More than 70,000 pulses @ 16.5kV; automatic power-off after 10 minutes if not operated LiFePo4 12.8V - 1000mAh
Trigger: Automatic + Manual
View Product Cart
Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6

Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6

SKU: sku-119

Weight: approx. 7 kg
Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling
Clamp factor (CF): Max (0.15 to 400 MHz): 4 dB (50 Ω system) and 13.5 dB (150 Ω system)
Connector: N-type female
Dimensions: 647 mm x 130 mm x 105 mm
Frequency Range: 10 kHz to 1000 MHz
Impedance: 50 Ohms
Max. Cable Diameter: 20 mm
Maximum Continuous Power: 0.01 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 3 min; 230 to 1000 MHz: 50 W for 3 min
Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326
View Product Cart
Haefely ONYX 16 ESD Simulator Gun for IEC 61000-4-2

Haefely ONYX 16 ESD Simulator Gun for IEC 61000-4-2

SKU: 0536

Air Discharge Voltage Range: 1 to 16 kV or 1 to 30 kV
Battery: at least 16 hour battery life
Contact Discharge Voltage Range: 1 to 16 kV or 1 to 30 kV
Frequency Capabilities: single/0.1/0.2/0.5/1/2/5/10/20 Hz
Holding Time: More than 5 sec
Polarity: positive & negative
Pre-Programmed IEC Levels: Yes
Resolution: 100V steps
Standards Met: IEC/EN 61000-4-2, ISO 10605
$595.00
Ships Same Day
Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form