Teseq (Schaffner) EMC Test Systems - Rentals

Teseq (Schaffner)

Schaffner/Teseq EMC Test Equipment Rentals Ship Same Day

TESEQ EMC TEST EQUIPMENT IN STOCK

Teseq, a division of Ametek CTS, offers one of the most comprehensive range of EMC systems for immunity and emissions testing. Their unique “modular” approach to EMC allows engineers to buy only what they need with the ability to easily upgrade as their needs change and expand. Recently acquired by Ametek, completing the Compliance Test Systems division alongside EM Test, Milmega and IFI amplifiers. And Now Amplifier Research.

Rentals Ship Today

The EMC Shop has a large inventory of Teseq equipment that is available for rental or purchase (Used).

About Renting

Amplifier Research

The top of the line amplifier in the EMC market. The EMC Shop has invested more money in Amplifier Research products than any other manufacturer.

Amplifier Research

The EMC Shop supports testing using Teseq RF conducted immunity test equipment

RF Conducted Immunity Setup Support

Meet Common Test Standards

Teseq (Schaffner)

Teseq INA 701 Magnetic Field Coil for IEC 61000-4-8 and IEC 61000-4-9

SKU: 30172

Max. Contin. Frequency Current Supply: 10 A

Max. Short Term Frequency Current Supply: 30 A (3 s)

Max. Contin. Frequency Field Strength Supply: 330 A/m

Max. Short Term Frequency Field Strength Supply: 11100 A/m

Applications: Radiated Immunity

Inquire for Availability

VIEW PRODUCT
Teseq NSG 4070C-110 RF Conducted Immunity System

SKU: 11240

Videos: Calibration Example, Remote Operation Setup

Standards Met: IEC/EN 61000-4-6, ISO 11452-4

Applications: RF Conducted Disturbances, Vehicle Component Disturbance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Frequency Range: 10 kHz - 400 MHz

Internal Amplifier: 110 Watts

Inquire for Availability

VIEW PRODUCT
Teseq NSG 3060A Modulator Solution For 6 kV Applications

SKU: 11779

Inquire for Lead Time

VIEW PRODUCT
Teseq LNA 6000 Low Noise Amplifier 1 MHz to 3 GHz

SKU: sku-80

Weight: approx. 127 grams (0.3 Lb's)

Application/Test Type: Increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments.

Dimensions: 28 mm x 95 mm x 27 mm

Frequency Range: 1 MHz to 3 GHz (nominal range) 200 kHz to 4 GHz (utilizable range)

Gain: 12.5 dB (±0.3 dB flatness)

Inquire for Availability

VIEW PRODUCT
Teseq MD 101 ESD Pulse Measurement Target

SKU: sku-33

Inquire for Lead Time

VIEW PRODUCT
Teseq CDN S900S RS-232 Coupling Decoupling Network for IEC 61000-4-6

SKU: 10828

DUT Connector Type: RF CDN for RS-232 serial COM ports per ANSI/EIA/TIA-232

Application/Test Type: Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cables

Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

Current Rating: 250 mA (CDN ST08 1 Amp)

Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)

Cost New:

Was:

$1,590.00

Price Now:

$1,200.00

In Stock
Teseq ISN T800S Impedance Stabilization Network per CISPR 22/32 Figure D.3/G.3

SKU: 12861

Weight: 1.2 lbs. (0.55 kg)

Connectors: 105 x 65 x 110 mm

Current Rating: 600 mA (per line), 1.2 Amps (per pair)

Dimensions: see photo in images

Frequency Range: 150 kHz to 30 MHz

Typically in Stock

VIEW PRODUCT
Teseq CDN 3425 Burst/EFT Coupling Clamp

SKU: sku-1065

Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)

Standards Met: IEC / EN 61000-4-4

Inquire for Availability

VIEW PRODUCT
Teseq CDN 3083-Burst 1000 Volt, 100-200 Amp Coupler for EFT/Burst

SKU: sku-221

Weight: 11 kg (24 lbs)

Application/Test Type: EFT/Burst immunity testing of equipment requiring large currents, specially designed for heavy industry, smart grid and electro vehicle applications.

Current Rating: 100 Amp or 200 Amp continous depending on model

Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)

Mains & EUT Connections: SHV; Screw terminals, rated for 200 A

Cost New:

Was:

Price Now:

$395.00

In Stock

ORDERING OPTIONS
Teseq NSG 1007 Programmable AC and DC Power Sources for IEC 61000-3-2 and -3-3

SKU: 11494

Test Standards: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11

Application/Test Type: Medical Device EMC Testings

Inquire for Availability

VIEW PRODUCT
Teseq NSG 4031 Broadband Immunity Test System for IEC 61000-4-31

SKU: sku-1044

Inquire for Availability

VIEW PRODUCT
150 Ohm Adapter Set for IEC 61000-4-6 Calibration Jig/BCI Test

SKU: 10856

Applications: BCI CALIBRATION SETUP

Standards: 4-6

Typically In Stock

VIEW PRODUCT