EM Test Transient Generators

(Showing 12 of 37)

The EM TEST transient generators are the ideal starting point to set up an EMC test facility. Most versatile to meet many requirements but also most ecomomic in terms of cost they are designed for fully compliant conducted immunity testing. The following "all-in-one" solutions are available to meet your test requirements. The EMC Shop stocks an assortment of the EM Test transient generators and with online ordering it makes everything fast and easy.

EM Test Transient Generators

Surge: Generators for combination/wave test IEC 61000-4-5, ANSI C63 and more.
EFT/Burst: Electrical Fast Transient Generators for IEC 61000-4-4.
Dips, Drops (& Variations): PQF/Powerline Tests in accordance to IEC 61000-4-11, 4-29 and more.
Automotive: Assortment of transient surges found in DC powered vehicles..
Ring Wave: Oscillatory wave tests per IEC 61000-4-12, 4-18, ANSI and more.
Telecom: Additional tests on data lines in unison with surge simulation tests.
Flicker & Harmonics: Power sources and analyzer turn key systems per IEC 61000-3-2 and 3-3.
ESD: Electrostatic discharge immunity simulators per IEC 61000-4-2
Magnetic: Radiated magnetic susceptibility per IEC 61000-4-8 and IEC 61000-4-9

Software for EM Test

Control Software for EM Test Transient Generators

IEC.Control allows for remote operation, custom test sequences, an expansive test standards library and reporting.

EM Test Transient Generators Videos

EM Test Transient Generators Categories

EM Test Multifunctional Generators

EM Test Surge Combination Wave Generators

EM Test Electrical Fast Transient Burst Generators

EM Test Telecom Surge Generators

EM Test Voltage Surge Generators

EM Test Current Surge Testers

EM Test Transient Generators Test Equipment, Systems & Solutions

EM Test AIF 503N32.1 3-Phase Flicker Impedance Network

SKU: sku-1917

Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7 and more

Application/Test Type: Medical Device EMC Testing

Built-in Power Analyzer: EM Test DPA 503N

Current Handling: 32 Amps per phase

RENTAL ONLY

View Product Cart
EM Test UCS500N7 Multifunctional Transient Immunity Simulator

SKU: sku-241

Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

EMC Standards: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11

Test Setup Guides: Electrical Transient and Noise, Surge Immunity, Power Failures

EFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV ±100 A to 2.2 kA

Combination/Wave Surge Output Capability: 250 V - 6,000 V ± 10%

External Coupling: Data Lines (EFT & Surge), 3PH EUT

Phase synchronization: 0° - 360°, resolution 1° (16 - 500Hz)

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

Inquire for Availability

View Product Cart
EM Test AMP 200N Low Frequency Signal Source DC (0Hz) to 250kHz

SKU: sku-480

Weight: Approx. 18kg

Amplifiers: low-frequency signal source with amplifier

Dimensions: 19", 3HU (500mm x 449mm x 133mm)

Frequency range: DC - 250kHz

General Data: Technical Details

Harmonic Distortion (THD): less than 0.1%

Operating Temperature: 10°C - 40°C

Output current: Max. 5Arms up to 200kHz Max. 4Arms 200kHz - 250kHz

Output Impedance: 30 mOhm @ 1 kHz

Output voltage: 50Vrms, max. 140V(p-p) up to 100kHz 30Vrms 100kHz - 250kHz

Protection: - Short circuit - Overtemperature

Signal power: 250W (nominal)

Supply Voltage: 115 V +10/-02%, 50/60 Hz or 230 V +10/-15%, 50/60 Hz

View Product Cart
EM Test VDS 200Q Four Quadrant Battery Supply Simulator and DC Voltage Source

SKU: sku-478

View Product Cart
EM Test AutoWave for Generating and Recording Automotive Waveforms

SKU: sku-477

Weight: 6kg

Dimensions: 100mm x 380mm x 390mm

Frequency range: DC - 50kHz

General Data: Technical Details

Output: 2 channels; 2 additional output channels can be added as an option (ExtBoard)

Resolution: 16 Bit

Supply Voltage: AC: 90V - 250V, 47Hz - 63Hz

Voltage: 10V, unipolar or bipolar

View Product Cart
Rent EM Test VDS 200N10 Automotive Battery Source and Voltage Drop Simulator, 60 V/10 A

SKU: sku-244

Common Mode Impedance: Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)

View Product Cart
EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave

SKU: 10413

Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHz

Damping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value

Oscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%

Source Impedance: 50 ohm ±20%

Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%

Burst Duration: At least 2s

Damping Rate-2: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value

Fast Damped Oscillatory Waves: As Per EN/IEC 61000-4-18

Frequency: 100 kHz ± 10%

General Data: Technical Details

Impedance: 12ohm and 30ohm ± 20%

Oscillation Frequency-2: 100kHz and 1MHz ± 10%

Peak current: Max. 500A @ 12ohm or Max. 200A @ 30ohm internally;

Polarity-2: Positive, negative

Pulse repetition: 1 to 60 transients per minute

Repetition Rate: Max. 5,000 /s ±10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Source impedance: 200ohm ± 20%

Spike frequency: 100kHz ± 10%

Test Voltage: 250 V - 6,000 V ± 10%

Equipment Group: Ring Wave Generators/Simulators

Inquire

View Product Cart
EM Test Automotive Transient Emission Set for ISO 7637-2

SKU: 30011

Applications: EV and Automotive

Test Standards: ISO 7637-2

Includes: AN 200N100 Artificial Network, BS 200N100.1 Electronic Switch, and BSM 200N40 Mechanical Switch (see specs in Overview)

Inquire for Availability

View Product Cart
EM Test ESD NX30 Electrostatic Discharge Simulator Gun System for up to 30kV Testing

SKU: 7395

Weight: 6.5 kg (Base Station) 1,250 g (discharge gun)

Voltage Range: 200 V - 30,000 V ± 5 %

Test Standards: ISO 10605, IEC 61000-4-2

Holding Time: More than 5 sec

Applications: EV and Automotive

Polarity: Pos / Neg

Pre-Programmed IEC Levels: Yes

Resolution: 100 V steps

Additional Test Standards: IEC 60601-1-2, MIL-STD-461 CS118, RTCA DO-160

Cost New:

Was:

Price Now:

$990.00

1 In Stock

Ordering Options
EM Test ACS 503N30 AC Voltage Source for Harmonics & Flicker

SKU: sku-312

Applications: Flicker and Harmonics Testing

Test Standards: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more

Inquire for Availability

View Product Cart
EM Test EFT 500N5 Electrical Fast Transient/EFT/Burst Simulator

SKU: 10693

Test Capabilities: EFT Immunity

Standards Met: IEC/EN 61000-4-4

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Max EUT AC Voltage (w/ Built in CDN): 250 Volts

Max EUT AC Current (w/ Built in CDN): 32 Amps

Max EUT DC Voltage (w/ Built in CDN): 270 Volts

Max EUT DC Current (w/ Built in CDN): 32 Amps

EFT/Burst Pulse Output Capability: 4.8 kV

External Coupling: Data Lines & 3 Phase EUT

INQUIRE

View Product Cart
EM Test EFT 500N5.8 Burst Generator up to 4.8kV, w/ Built in 3-Phase Coupler, IEC 61000-4-4

SKU: sku-293

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

View Product Cart