Schaffner NSG 2025-4 EFT / Burst Generator Built in Three Phase Coupler

Condition:
Used
Burst (EFT) 5/50 ns:
Pulse conforms to IEC/EN 61000-4-4
Burst frequency:
0.1 kHz - 1,000 kHz
Burst time:
Rise Time: 5ns ±20% (50 W, 10 - 90%) Pulse Width: 50ns ±30% (50 W and 1 W), 100ns ±50% open circuit
Coupling:
Line to reference ground (IEC 1000-4-4), selected lines together to reference ground, all lines to reference ground (common mode)
Mains & EUT Connections:
HV Coax (Direct); L, N and PE via Coupler
Phase synchronization:
Asynchronous/synchronous 0 - 360° ±2°
Polarity:
Positive/Negative
Pulse amplitude:
200 Volts - 4.5 kV (20 Volt Steps)
Repetition time:
100ms to 10s
Test duration:
1 to 150 pulses (15ms burst duration as per IEC 61000-4-4 up to 10 kHz)
Manufacturer:
Teseq
Online Orders Ship Same Day
$975.00

 

SKU:
11294-RE
Availability:

In Stock


Getting Started...

Overview

The Teseq (Schaffner) NSG2025-4 Fast Transient/Burst Generator is a previous generation compliance machine used to meet IEC 61000-4-4 and other test procedure for electrical fast transient immunity. The system is self contained with a built-in 3 Phase, 30 amp coupler allowing for easy shipping and setup.

The NSG 2025-4 offers an extensive range of pulse voltages and burst frequencies available in a single instrument. Pulses can be coupled into the mains supply voltage or applied as a pure high voltage for data and signal line testing.

Pre-programmed IEC standard tests are available at the touch of a button and pulse parameters are user configurable - manually via front panel control or via PCWindows software control. Not only does the Teseq / Schaffner NSG 2025 meet all the requirements of current world test standards with comfortable margins, it also anticipates likely future modifications with functions including a user-configurable burst frequency to 1MHz and extended selectable coupling modes.

 

Key Considerations

Manufacturer:
Teseq
Burst (EFT) 5/50 ns:
Pulse conforms to IEC/EN 61000-4-4
Burst frequency:
0.1 kHz - 1,000 kHz
Burst time:
Rise Time: 5ns ±20% (50 W, 10 - 90%) Pulse Width: 50ns ±30% (50 W and 1 W), 100ns ±50% open circuit
Coupling:
Line to reference ground (IEC 1000-4-4), selected lines together to reference ground, all lines to reference ground (common mode)
Mains & EUT Connections:
HV Coax (Direct); L, N and PE via Coupler
Phase synchronization:
Asynchronous/synchronous 0 - 360° ±2°
Polarity:
Positive/Negative
Pulse amplitude:
200 Volts - 4.5 kV (20 Volt Steps)
Repetition time:
100ms to 10s
Test duration:
1 to 150 pulses (15ms burst duration as per IEC 61000-4-4 up to 10 kHz)

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.