Overview
High-voltage noise simulator HNS 200 is designed according to Toyota TSC 0502G Fig.29 to simulate HV noise generated within vehicles, and the generator can be customized. The max current of the built-in coupling network can reach 100 A. HNS 200 can be connected with APS/APG series as the integrated output terminal to connect to DUT. The simulator interconnected with PC via data bus and Ethernet comprises the whole testing system.
Features:
- 5.7” color touch screen front panel;
- Built-in HV noise module;
- In compliance with Toyota TSC 0502G;
- Built-in coupling network (incl. load dump coupling), 60 V, 30 A;
- DUT voltage/current detection, and over-current protection;
- Ethernet RJ 45 for PC remote control and test report printing;
|
Technical Parameters |
|||
|
Test Mode |
Continuous mode |
EFT mode |
|
|
Pulse Amplitude (Vpp) |
5 - 250 V |
||
|
Pulse Frequency |
1 kHz - 50 kHz |
100 - 1,000 kHz |
|
|
EFT Frequency |
N/A |
1 Hz - 100 Hz |
|
|
No. Of Pulses In EFT |
N/A |
1 - 10 |
|
|
Test Time |
1 – 9,999 s |
||
|
Coupling Network Capacity |
DC 60 V, 30 A |
||
|
Testing & Controlling (Triggering circuit) |
|||
|
Output |
With 50Ω co-axial connector (applicable to tests connecting with capacitive clamp) |
||
|
Coupling Method |
To positive pole of battery (for tests on power supply line) |
||
|
CRO Trigger |
To trigger the 5 V signal of oscilloscope |
||
|
General Parameters |
|||
|
Power supply |
AC 110/220V, ±10%, 45-65Hz (Default configuration is 220 V, 50 Hz for Mainland China) |
||
|
Operating temperature |
15℃ - 35℃ |
||
|
Relative temperature |
35%-85%RH (no condensation) |
||
|
Dimension |
450 × 600 × 177 mm (4U cabinet) |
||
|
Weight |
Approx. 20 kg |
||
