Name: Schloder VIS 740 Step Transformer for Voltage Drops, IEC/EN 61000-4-11
Brand: Schloder
SKU: sku-788
Availability: InStock

Overview

Schloder VIS 740 Description:

With the Schloder combination voltage interruption simulator Schloder VIS 1700 Voltage Interruption Simulator and the step transformer VIS 740 voltage drop tests according the standard are possible – see chapter 5.1 of the standard.

The step transformer fulfilled the standard requirement regarding the high stability of the voltage. Other variable transformers or variacs are not useful usually. The switching of the voltages to 80%, 70%, 40% or 0% is performed by the position of the jumpers on the front panel.

Key Considerations

Manufacturer:

Schloder

Dips, Interrupts & Variations:

Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

General Data:

Technical Details

Input:

Input voltage: 230 Volt, 50 Hz Input current: 16 A

Mains & EUT Connections:

Included Connector

Output Current:

40 A until 5 second at 40 % 23 A until 5 second at 70 % 20 A until 5 second at 80 %

Peak inrush current capability:

16 Amps

Supply Voltage:

230 Volt, 50 Hz

Related EMC Equipment & Solutions

Teseq INA 6502 Automatic Step Transformer for IEC 61000-4-11

SKU: sku-2166

Test Standards: IEC/EN 61000-4-11

Compatible Generators: Teseq NSG 3060, Teseq NSG 3040

In stock

View Product

Schloder CWG 1500 Surge Generator, 4.4 kV, 2.2 kA, EN/IEC 61000-4-5

SKU: sku-783

Condition (5-10 Scale): 9

Warranty: 6 Months

Calibration: Fresh w/ Data at Time of Order

Test standard: IEC 61000-4-5

Accessorries: Complete

Input: 120VAC/1PH

Phase synchronization: 0 - 359°, step 1° net sync. triggering

Polarity: pos / neg / alternate

Pulse current (short circuit): 0.1 - 2.2 kA

Pulse voltage (open circuit): 0.2 - 4.4 kV

Test duration: 10 - 990 sec

$7,950.00

1 LEFT

Schloder VIS 1700 Voltage Interruption Simulator

SKU: sku-784

Communication: BNC outputs (on rear) for voltage, current and scope triggering

Coupling: BNC

Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

General Data: Technical Details

Mains & EUT Connections: 4mm banana line

Output Current: AC max. 280 V, DC max. 3 6 0 V

Peak inrush current capability: 16 Amps

Phase synchronization: at any phase position 0° - 360 °

Test duration: 0.1sec - 9990sec, furthermore single event and continuous operation

Test Voltage: AC max. 280 V ,DC max. 3 6 0 V

Applications: EMC Precompliance Testing, Conducted Immunity

Typically In Stock

View Product

3ctest PFS 2216SD Power Fail Simulator for EN/IEC 61000-4-11

SKU: sku-590

Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29

Mains & EUT Connections: 4mm banana line

Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s

Peak inrush current capability: 500 Amps

Applications: EMC Precompliance Testing, Conducted Immunity

Rise time: 1-5us（100Ω load）

Test duration: 50ms-50000ms

Test Voltage: 250V AC，300V DC

Trigger: BNC,5V TTL

Inquire for Availability

View Product

EM Test PFS 500 Power Fail Simulator for EN/IEC 61000-4-11

SKU: sku-1292

Test Standards: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

Applications: Voltage dips, Voltage interruptions, Voltage variations, Inverse, EMC Precompliance Testing, Conducted Immunity

EUT Power Handling: AC up to 240V/16A

$4,750.00

1 Unit

EFT/Burst & ESD Rental Package for IEC 61000-4-2 and IEC 61000-4-4

SKU: sku-669

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

Burst frequency: 1 Hz to 2 MHz

Burst time: 0.01 to 999 ms

Coupling: Built-in Single Phase 250 Volts AC / 110 Volts DC and 16 Amps

Polarity: positive, negative, alternating

Pulse amplitude: 0.10 - 4.5 kV

Repetition time: 0.1 to 400 Hz or 2.5 ms to 10 s or 1 to 500 period

Standards Met: IEC/EN 61000-4-4

Test duration: Impulses per burst 1000 max Impulses per second 12000 max

$1,595.00

In Stock

Ordering Options

Attenuator Set for IEC/EN 61000-4-6 Conducted RF Immunity

SKU: sku-584

View Product

IEC/EN 61000-4-X Test Rack for Conducted Immunity Certification

SKU: 11195

Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

Standards Met: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-12

Applications: Electrical Transient and Noise, Surge Immunity, Power Failures

Test Setup: Conducted Immunity/Susceptibility Test Setup

Max EUT Power: 600 Voltas @ 100 Amps

Peak inrush current capability: 500 A (at 230 V)

EFT/Burst Pulse Output Capability: 4.8 kV

Combination/Wave Surge Output Capability: 4.4 kV (in 1 V steps)

Generic Standards: IEC 61000-6-1, IEC 61000-6-2

Inquire for Availability

View Product

3ctest CCC100 EFT/Burst Coupling Clamp for IEC/EN 61000-4-4

SKU: sku-621

Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

Cable Diameter: up to 40 mm (1.57 in)

Coupling Length: 1 m (39.4 in)

Dimensions: 1040x140x110mm

EFT Coupling Clamps: as per IEC 61000-4-4

RF Connector: High voltage connector,coaxial. GND connection 4 mm plug, banana

Standards Met: IEC/EN 61000-4-4

Voltage Rating: up to 5.5kv

View Product

Schloder VIS 740 Step Transformer for Voltage Drops, IEC/EN 61000-4-11

Getting Started...

Overview

Schloder VIS 740 Description:

Key Considerations

Related EMC Equipment & Solutions

Teseq INA 6502 Automatic Step Transformer for IEC 61000-4-11

Schloder CWG 1500 Surge Generator, 4.4 kV, 2.2 kA, EN/IEC 61000-4-5

Schloder VIS 1700 Voltage Interruption Simulator

3ctest PFS 2216SD Power Fail Simulator for EN/IEC 61000-4-11

EM Test PFS 500 Power Fail Simulator for EN/IEC 61000-4-11

EFT/Burst & ESD Rental Package for IEC 61000-4-2 and IEC 61000-4-4

Attenuator Set for IEC/EN 61000-4-6 Conducted RF Immunity

IEC/EN 61000-4-X Test Rack for Conducted Immunity Certification

3ctest CCC100 EFT/Burst Coupling Clamp for IEC/EN 61000-4-4

Connect with The EMC Shop