Overview
The 3ctest S10C Series surge (impulse) current simulator is based on 3ctest third-generation intelligent multiple function comprehensive test simulator. One stop multi-waveform surge test platform is built by combination of different waveform generation network. Programmable controller and computer technology is applied for control. Unique color touch screen and friendly human-machine interface. It highly enhance test efficiency for high voltage and current test with easy operation. Setting simple test requirements on parameters setting page, all test can be done automatically. It is featured with high system integration and intelligence, easy operation and safety system to save time and space.
As per
- IEC 61643-1
- GB/T 17626.5
- GB/T16927.1
- GB/T 16896.1
- GB11032-2000
- GB18802.1-2002
- YD/T 1235.2-2002
- UL1449
| Technical Parameters | |
| Model | S10C15 |
| Output waveform | 8/20μs?±10%? current wave Output peak current 15kA±10% Reversed polarity peak ?20? |
| Voltage polarity | +/- ?automatic switch? |
| Charging time | 10s~999s |
| Charging voltage instability | Less than 1% |
| Trigger mode | Automatic or manual, single trigger |
| Trigger malfunction | Less than 1% |
| Trigger range | 100% rated charging voltage |
| Measurement display resolution | Better than 3% |
| Insulation strength | ≤500V RMS?common port COMMCN to reference ground PE? |
| Auxiliary mains voltage | 220V(±10%)/50Hz |
| Auxiliary mains current | <10A?continuous? |
| General Data | |
| Power supply | AC220V ± 10%?50/60Hz |
| Temperature | -10-+40°C |
| Humidity | 35%-85%RH?no condensation? |
| Ground resistance | No more than 0.5Ω |
| Dimension | 600x800x1171mm?22U? |
| Weight | Approx. 200kg |
| No conductive dust, no fire or explosion danger, no corrosive metal and insulation air. Waveform of mains voltage is sine wave. The THD is <5%. | |
