Overview
Automatic 20kV/20kA multiple-function lightening surge simulator SG-5020G is combined with Haefely layout. Ball gap discharging mode is applied for discharge main switch. Multiple pulse waveforms can be output by replacing wave regulating module simply. One simulator can conduct lightening surge test for all kinds of standards for different industries.
| Combination wave parameter (1.2/50μs, 8/20μs) | |
| Output voltage | 0.5-20kV ±10% |
| Output polarity | Positive/negative/alternating |
| Output voltage wave | 1.2±30%/50±20%μs |
| Output current wave | 8/20±20%μs |
| Output impedance | 2Ω(±0.25Ω) (0.3Ωexternal output impedance) |
| Output current(s.c.) | 0.25-10kA ±10% (0.3Ωexternal output impedance) |
| Current wave parameter (8/20μs) | |
| Charging voltage | 0.5-8kV ±10% |
| Output polarity | Positive/negative/alternating |
| Output current wave | 8/20±20%μs |
| Output impedance | 0.4Ω |
| Output current(s.c.) | 1.25-20kA ±10% |
| Current wave parameter (10/350μs) | |
| Charging voltage | 0.5-10kV ±10% |
| Output polarity | Positive/negative/alternating |
| Output current wave | 10(-10%+100%) /350±20%μs |
| Output impedance | 13.33Ω |
| Output current(s.c.) | 37.5-750kA ±10% |
| Current wave parameter (10/1000μs | |
| Charging voltage | 0.5-10kV ±10% |
| Output polarity | Positive/negative/alternating |
| Output current wave | 10(-10%+100%) /1000±20%μs |
| Output impedance | 40Ω |
| Output current(s.c.) | 12.5-250kA ±10% |
| Telecom wave parameter (10/700μs, 5/320μs) | |
| Output voltage | 0.5?10kV ±10% |
| Polarity | Positive/negative/alternating |
| Output voltage wave | 10±30%/700±20%μs |
| Output current wave | 5±30%/320±20%μs (25Ωexternal output impedance) |
| Output impedance | 15?(±0.25Ω), 40? (25Ωexternal output impedance) |
| Output current(s.c.) | 250A (25Ωexternal output impedance) |
| General Data | |
| Measurement display accuracy | better than 1% |
| Trigger mode | automatic or manual; single trigger |
| Operating mains | AC 220V ±10%, 50/60Hz |
| Temperature | -10- +40°C |
| Humidity | 35%-85%RH ?no condensation? |
| Dimension | W600xD950 x H1749mm |
| Weight | Approx.300kg |
| Accessories | |
| Fuse10A | 1 |
| Current transformer TR1025(built-in) | 1 |
| Three-core power cord | 1 |
| Braided strap 3m | |
| Testing wire6mm2×0.35m(red) (One end is clamp, another is plug tip) | 1 |
| Testing wire6mm2×0.35m(black) (One end is clamp, another is plug tip) | 1 |
| Testing wire6mm2×0.35m(green) (One end is clamp, another is plug tip) | 1 |
| Short wire6mm2×0.135m(red) (Two ends are plug tips) | 1 |
| Calibration certificate | 1 |
| User manual | 1 |
| Test report | 1 |
| Optional products | |
| Oscilloscope | TDS3012C |
| Current probe | HILOK TR1025 10kA |
| Peak acquisition software | Acquisition of both current and voltage, LCD touch screen display |
| Waveform measurement software | TEST3000; calculate, restore and compare with waveform parameters |
| Control software | MCS3000, remote control, supported by windows xp?windows2000, windows7 |
| CDN | SGN 5020, used with 20kV, three-phase20A |
