Calibration Equipment

Calibration Equipment Test Equipment, Systems & Solutions

• 

  EFT-CAL-KIT Burst Generator Calibration Kit for IEC 61000-4-4

  SKU: 10518

  Weight: Appprox.140g

  Connectors: Input: BNC or SHV, Output: BNC

  Cross talk attenuation: 54dB, 60dB

  Frequency Range: -3dB bandwidth: 400MHz

  Impedance: EFT-AT50 input 50 Ω @ output 50 Ω | EFT-AT1000 input 1000Ω @ output 50Ω

  Pulse voltage (open circuit): 8kV

  Standards Met: IEC/EN 61000-4-4, ISO7637.2-p3

  Voltage Rating: EFT-AT50: 500:1 | EFT-AT1000: 1000:1

  Cost New:

  Was:

  Price Now:

  $2,950.00 - $3,250.00

  IN STOCK

  Ordering Options

• 

  CST2-30 ESD Current Target Calibration Kit

  SKU: 8757

  Frequency Range: DC - 4 GHz

  Input Resistance: ≤ 2.00 Ω (± 1%)

  Max. IEC Pulse Amplitude: Verified up to ±30 kV

  Applications: Electrostatic Discharge Immunity Test

  Test Standards: IEC 61000-4-2, ISO 10605, and many more

  Cost New:

  Was:

  Price Now:

  $495.00 - $3,975.00

  In Stock

  Ordering Options

• 

  ESVM High Voltage Electrostatic Voltmeter for ESD Generator Voltage Verification

  SKU: ESVM

  Air Discharge Voltage: ± 1V ~ 100 kV ( ± 1% ± 2 counts )

  Voltage Resolution: 1 Volt up to 20 kV, 10 Volts Over 20 kV

  Display: 4 ½ large LCD / LED

  Standards Met: ANSI C63.16, ISO 10605, Mil-STD 461G CS118 and more...

  Input/Shunt Resistance: 100 GOhm

  Ships within 24 hours.

  View Product

• 

  ECO2G 2 GHz EMC Calibration Oscilloscope ESD Gun Verification

  SKU: 5501

  Sample Rate: 5 GSa/s (10 GSa/s ESR) ADC per analog channel

  Record Length: up to 500 Mpts

  Waveform Capture Rate: Up to 750,000 wfm/s (Sequence mode)

  Pre-Programmed Settings: IEC 61000-4-2 150pF/330 Ohm, All four R/C Combinations of ISO 10605

  Vertical Scales: 0.5 mV/div to 10 V/div

  Interfaces: USB Hosts, USB Device (USBTMC), LAN（VXI-11/Telnet/Socket, micro SD card, Pass/Fail, Trigger Out, HDMI

  Protocol Capabilities: Serial bus triggering and decoder - I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, and Manchester

  Applications: How to Capture an Electrical Transient Using an Oscilloscope, EMC Precompliance Testing

  Cost New:

  Was:

  Price Now:

  $395.00 - $10,950.00

  IN STOCK

  Ordering Options

• 

  DP7 High Voltage Probe for Surge Generator Waveform Verification

  SKU: 6533

  Bandwidth: DC - 70 MHz

  Attenuation: 1:100 and 1:1000

  Accuracy: ±2%

  Input Voltage Range: < +700V for X100, < +7000V for X1000

  Output Voltage: ≤ + 7000V

  Output Impedance: 50 Ω

  Standard Met: IEC 61000-4-5, IEC 61010-031 Category I

  Applications: Conducted Emissions, High Voltage Floating Measurements, Voltage Surge Measurement, Power Electronics System Design, Electronic Ballast Design

  Cost New:

  Was:

  Price Now:

  $185.00 - $1,850.00

  IN STOCK

  Ordering Options

• 

  3ctest PVK Calibration Kit for ISO 7637-2 Pulses

  SKU: 4515

  Test Standards: ISO 7637

  Specs: See Overview

  Included Models: PVK 05, 1, 2, 4, 10, 20, 30, 50

  Cost New:

  Was:

  Price Now:

  $375.00 - $3,095.00

  In Stock

  Ordering Options

• 

  Pearson 101 Current Monitor for Surge Generator Output Verification

  SKU: 11067

  Weight: 23 ounces

  Aperture: See data sheet

  Connector type: BNC (UG-290A/U)

  Current time product: 2.5 Ampere-second maximum

  Dimensions: See data sheet

  Droop rate: 0.1 %/millisecond

  General Data: Technical Details

  High frequency 3dB cut-off: 4 MHz (approximate)

  I/f figure: 12 peak Amperes/Hz

  Low frequency 3dB cut-off: 0.25 Hz (approximate)

  Maximum peak current: 50000 Amperes

  Maximum rms current: 200 Amperes

  Output resistance: 50 Ohms

  Probes: Current monitoring

  Sensitivity: 0.01 Volt/Ampere +1/-0%

  Useable rise time: 100 nanoseconds

  IN STOCK

  View Product

• 

  EFT-DLC-CAL Transducer Plate for Coupling Clamp Calibration

  SKU: 12781

  Connector Types: Fischer HV, SHV, BNC

  Application: EFT Waveform Verification, IEC / EN 61000-4-4 Edition 3

  Standards Met: Calibration according to IEC / EN 61000-4-4 Edition 3

  Compatible Couplers: Any

  Cost New:

  Was:

  Price Now:

  $1,475.00

  IN STOCK

• 

  CST1 ESD Current Target Calibration Kit DC - 4 GHz, 30 kV

  SKU: 8539

  Frequency Response: DC – 4 GHz S21 < ± 0.5 dB up to 1 GHz, < ± 1.2 dB up to 4 GHz

  Input resistance: 1.00 Ohm - ± 1% 1.00 Ohm when match with 50 Ohm load

  Max. IEC Pulse Amplitude: Verified up to ± 30 kV

  Voltage Non-linearity: < 2% up to 20 kV, < 5% up to ± 30 kV

  Standards: IEC 61000-4-2, ISO 10605, and many more

  Applications: Electrostatic Discharge Immunity Test

  Cost New:

  Was:

  Price Now:

  $475.00 - $5,940.00

  In stock

  Ordering Options

• 

  EMC Partner VERI-DIPS Inrush Current Verification & Calibration Kit

  Applications: Transient Waveform Verification

  Test Standards: IEC 61000-4-11, IEC 61000-4-29, IEC 61000-4-34

  Current Range: 1 - 1000 Amps

  Output Connector: BNC

  Application Time (Max): 30 seconds

  RENTAL ONLY

  View Product

• 

  CP-CF Calibration Fixture for Current Probes

  SKU: 11911

  Max Probe Girth: 2.75"

  Fits Probe Arpetures: 1.25" to 1.75"

  Frequency Range: 20 Hz - 500 MHz

  Insertion Loss: < 2dB

  Connetors: N(f)

  Applications: Conducted Immunity/Susceptibility Test Setup

  Test Standards: IEC/EN 61000-4-6, ISO 11452-4

  In stock

  View Product

• 

  Schwarzbeck HFCD 9171 Calibration Balun

  SKU: sku-1724

  View Product