Calibration Equipment Categories
Calibration Equipment Test Equipment, Systems & Solutions
-
Fischer FCC-BCICF-1 Bulk Current Injection Probe Fixtures
SKU: sku-1666
Weight: 2.5kgDimensions: (L x W x H) 250mm x 177mm x 175mmFrequency Range: 10 kHz – 400 MHzVSWR: Meets DO-160 standalone limit line -
-
-
-
-
AH Systems CPF-532 Calibration Fixture for Injection & Monitoring Current Probes
SKU: sku-207
Weight: 13 Lb.'sApplication/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibratedDimensions: 12" x 7" x 8"Frequency Range: 10 kHz - 400 MHz -
AH Systems CPF-531 Calibration Fixture for RF Current Probes
SKU: sku-206
Weight: 10 Lb.'sApplication/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibratedDimensions: 10" x 7" x 7"Frequency Range: 1 MHz - 1 GHz -
AH Systems CPF-630 Current Monitoring Probe Calibration Fixture
SKU: 10205
Weight: 9 Lb.'sApplication/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibratedDimensions: 10" x 7" x 6"Frequency Range: 20 Hz - 500 MHz -
Teseq PCJ 9201B Probe Calibration Jig
SKU: 11132
Weight: 4.5 Kgs (10 lbs)Dimensions: 26.0 cm x 18.1 cm x 15.0 cm (Max Probe Diameter: 11.5 cm; Min Probe Window Diameter: 1.6 cm; Max: 6.7 cm)Frequency Range: DC to 400 MHzImpedance: 50 OhmsRF Connector: N-typeStandards Met: ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 and IEC/EN 61000-4-6VSWR: up to 1 MHz ≤ 1.10:1; 10 MHz ≤ 1.14:1; 30 MHz ≤ 1.22:1; 100 MHz ≤ 1.50:1; 200 MHz ≤ 2.00:1; 300 MHz ≤ 2.75:1; 400 MHz ≤ 3.50:1 -
Teseq MD 103 1 Ohm Current ESD Pulse Target
SKU: 10035
Resistance: 1.00 Ohm - ± 1% 1.00 Ohm when match with 50 Ohm loadFrequency Range: DC - 4 GHzGrounding Plane & Cal Setup: Avaialble at ESDGuns.comINQUIRE -
York EMC HFG01 Harmonic and Flicker Generator
SKU: 6822
Test supply connector: 1.3 m captive lead with CEE 7/7 mains plug for connection to test equipmentPower Supply: External power supply, 24 V DC, 1A maximumIndicators: Thermal shutdownHarmonic current: Up to 40th harmonic: 50 Hz to 2 kHzFlicker disturbance: 1 Hz and 8.33 HzDimensions: 330 mm × 320 mm × 170 mmTest Standards: IEC 61000-3-2, IEC 61000-3-3$650.00 - $6,500.00IN STOCK -
ECO500M 500 MHz Oscilloscope, Pre-Programmed for Waveform Measurements
SKU: 12157
Bandwidth: 500 MHzTrigger type: Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video, Qualified, Nth edge, Setup/hold, Delay, SerialPeak detect: 200 psSequence: Up to 80,000 segments, interval between triggers = 1.3 μs min.Channels: 4$29.00 - $395.00In Stock