150 Ohm Adapter Set for IEC 61000-4-6 Calibration Jig/BCI Test

150 Ohm Adapter Set for IEC 61000-4-6 Calibration Jig/BCI Test


No reviews yet Write a Review

 

SKU:
sku-856

 

Getting Started...

Check out our Google Reviews

Overview

The EMC Shop is stocking the elusive adapters required for IEC 61000-4-6 bulk current injection testing during calibration. Parts included:

  • INA 721-100: 150 Ohm to 50 Ohm Adapter (N-Type)
  • INA 721-150: 150 Ohm Terminaction (N-Type)

Related EMC Equipment & Solutions

Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing

Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing

SKU: sku-851

Weight: 1.5 kg (3.3 lbs)
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating: 1000 mA maximum
Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)
Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)
Frequency Range: 150 kHz to 230 MHz
Mains & EUT Connections: BNC 75 Ω
RF Connector: BNC 75 Ω
RF Input Voltage: 20 Volts Max
Standards Met: IEC 61000-4-6
Voltage Division Factor: 10 dB ±1 dB to 80 MHz, 10 dB +3, -2 dB from 80 MHz to 230 MHz
Voltage Rating: AC max. voltage (line to ground): 250V; DC max. voltage (line to ground): 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)
$1,245.00
EM Test CWS 500N1 Continuous Wave Simulator for IEC 61000-4-6

EM Test CWS 500N1 Continuous Wave Simulator for IEC 61000-4-6

SKU: sku-410

Weight: 17 kg (37.5 Pounds)
Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applications
Dimensions: 19"/3 HU
Frequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHz
Impedance: 50 Ohms
Input: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)
Maximum Continuous Power: 80W (nominal)
Standards Met: IEC 61000-4-6
Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, Service
Voltage Rating: 1 V to 30 Volts Max
Inquire for Availability
VIEW PRODUCT Cart
EFT-CAL-KIT Burst Generator Calibration Kit for IEC 61000-4-4

EFT-CAL-KIT Burst Generator Calibration Kit for IEC 61000-4-4

SKU: 10518

Weight: Appprox.140g
Connectors: Input: BNC or SHV, Output: BNC
Cross talk attenuation: 54dB, 60dB
Frequency Range: -3dB bandwidth: 400MHz
Impedance: EFT-AT50 input 50 Ω @ output 50 Ω | EFT-AT1000 input 1000Ω @ output 50Ω
Pulse voltage (open circuit): 8kV
Standards Met: IEC/EN 61000-4-4, ISO7637.2-p3
Voltage Rating: EFT-AT50: 500:1 | EFT-AT1000: 1000:1
$2,950.00 - $3,250.00
IN STOCK
ORDERING OPTIONS