Overview
Com-Power ISN-T8 Details:
The Com-Power ISN T8 design is based on the circuit illustrated in Figure D.3 of CISPR 22 and Figure F8 of CISPR 32.
The RF Port is a 50 Ohm female BNC connector, located on the top of the ISN. The ISN is equipped with two D-sub 25 pin female connectors located on the front panel (EUT Port) and rear panel (AE Port), providing the interface to the LCL Adapter and Connecting Adapter, respectively.
How to Rent the Com-Power ISN-T8:
- Click "Add to Cart" above
- Register or Check Out as a Guest
- Select Shipping Method (use "My Account" and input your account # and method)
- Order Confirmation and Tracking Info Follows
Com-Power ISN-T8 Specifications:
- Standards: CISPR 16-1-2, CISPR 22, CISPR 32
- Frequency Range: 150 kHz to 30 MHz
- Application: Unscreened lines w/up to 4 balanced pairs
- Max. Current rating: 800 mA (per line), 1.6 Amps (per pair)
- Voltage rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)
- RF Port Connector: 50O BNC (female)
- EUT/AE Port Connections: RJ45 (RJ11 also available)
- Common mode Impedance: 150O ±20 Ohms
- Phase: 0° ±20°
- Voltage Division Factor: 10.5 dB ±1 dB
- Decoupling Attenuation(minimum Isolation)
- 150 kHz to 1.5 MHz: 35 to 55 dB
- 1.5 MHz to 30 MHz: 55 dB
- Symmetric Insertion Loss: Max: 3 dB ±0.25 dB
- Symmetric Load Impedance: 100O
- Transmission Bandwidth: >100 MHz
- Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]
