Com-Power LI-4100 10 kHz to 10 MHz Line Impedance Stabilization Network

Weight:
17 lbs. / 7.7 kg
Application/Test Type:
Power line conducted emissions tests
Current Rating:
100 Ampere AC, 70 Ampere DC
Dimensions:
10 x 10 x 21 inches /25.4 x 25.4 x 53.3 cm
Frequency Range:
10 kHz to 10 MHz
Inductors:
50 microhenry (air-core)
Insertion Loss:
0.3 dB (150 kHz to 30 MHz)
Mains & EUT Connections:
Superior Electric SUPERCON® shrouded sockets
RF Connector:
50Ω N-type (female)
Standards Met:
RTCA DO-160 / MIL-STD 461
Voltage Rating:
525 VAC (Line to Ground), 740 VDC
Manufacturer:
Com-Power
Online Orders Ship Same Day
$395.00

 

SKU:
sku-424-RE-1

Getting Started...

Overview

The LI-4100 Line Impedance Stabilization Network (LISN) provides the necessary measurement platform for performing power line conducted emissions compliance testing as required by most worldwide standards for commercial products. The LI-4100 is compliant with MIL-STD 461F.

The LISN provides defined stable impedance and isolates the EUT from power source influences, thereby providing accurate and repeatable results. The LI-4100 includes one pair of, separately housed, single-conductor networks, to be installed in series with each current-carrying conductor in a single-phase, dual-phase or DC power system. A second LI-4100 pair can be used to accommodate 3-phase power systems (Wye or Delta configurations).

The LI-4100 is equipped with Superior Electric SUPERCON® shrouded sockets at the mains (power input) and EUT (power output) ports. The matching color-coded plugs for connection to the mains and EUT wiring are included. This LISN uses air-core inductors to prevent saturation and permeability variation. The mounting plate of the LI-4100 is left unpainted in order to facilitate connection to earth ground in its installation, which is essential due to high leakage current.

Typical Connection Diagrams

Single Phase connection with one set of LISN

Single Phase connection with one set of LISN

Three Phase connection with two sets of LISNs

Three Phase connection with two sets of LISNs


Transient Protection

Use of a Transient Limiter for impedance matching, reduction of out-of-band emissions and transient protection for your measurement instrument is highly recommended and available from Com-Power.

Calibration

All LI-4100 LISNs are individually calibrated in compliance with the relevant requirements of MIL-STD 461F. Recognized ISO 17025 accredited calibration is also available upon request.

Typical Data


Key Considerations

Manufacturer:
Com-Power
Weight:
17 lbs. / 7.7 kg
Application/Test Type:
Power line conducted emissions tests
Current Rating:
100 Ampere AC, 70 Ampere DC
Dimensions:
10 x 10 x 21 inches /25.4 x 25.4 x 53.3 cm
Frequency Range:
10 kHz to 10 MHz
Inductors:
50 microhenry (air-core)
Insertion Loss:
0.3 dB (150 kHz to 30 MHz)
Mains & EUT Connections:
Superior Electric SUPERCON® shrouded sockets
RF Connector:
50Ω N-type (female)
Standards Met:
RTCA DO-160 / MIL-STD 461
Voltage Rating:
525 VAC (Line to Ground), 740 VDC

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.