A.H. Systems BCP-611 10 KHz – 150 MHz Broadband Current Probe

A.H. Systems BCP-611 10 KHz – 150 MHz Broadband Current Probe

Condition:
Used
Weight:
1.4 Lbs (650 grams)
Aperture:
1.25" (32 mm)
Application/Test Type:
Measure currents on 50 Hz, 60 Hz and 400 Hz powerlines without making direct contact with the source conductor or metallic surface
Current Rating:
400 Amps (5,000 Peak) Maximum
Frequency range:
10 KHz to 150 MHz
Max Primary Current:
800 Amps (DC to 60 Hz) 450 Amps (400 Hz) CW: 4 Amps
Max Pulse Current:
100 Amps
RF Connector:
N-Type(female)
Standards Met:
IEC 61000-4-16, IEC 61000-4-19 Annex C, SAE J1113-2, ISO 11452-8, DO 160D/E Section 18 and MIL-STD-461 D/E CS101, CS109 and RS101.
Transfer Impedance:
-63 to -28 dBΩ
Manufacturer:
AH Systems
Online Orders Ship Same Day

 

Availability:

Call for availability

SKU:
sku-1077

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on current probes. The BCP-611 Current Probe is designed to permit field intensity meters, spectrum analyzers, and other 50 ohm impedance instruments to measure quantitative magnitudes of current. Measurements can be made on single and multiconductor cables, ground and bonding straps, shielded conduits and on coaxial cables.

For ease and convenience of performing conducted measurements, all of our current probes utilize the split type clamp-on design. Small and lightweight, each Current Probe is manufactured to exacting standards, thus insuring repeatable performance.

Key Considerations

Manufacturer:
AH Systems
Weight:
1.4 Lbs (650 grams)
Aperture:
1.25" (32 mm)
Application/Test Type:
Measure currents on 50 Hz, 60 Hz and 400 Hz powerlines without making direct contact with the source conductor or metallic surface
Current Rating:
400 Amps (5,000 Peak) Maximum
Frequency range:
10 KHz to 150 MHz
Max Primary Current:
800 Amps (DC to 60 Hz) 450 Amps (400 Hz) CW: 4 Amps
Max Pulse Current:
100 Amps
RF Connector:
N-Type(female)
Standards Met:
IEC 61000-4-16, IEC 61000-4-19 Annex C, SAE J1113-2, ISO 11452-8, DO 160D/E Section 18 and MIL-STD-461 D/E CS101, CS109 and RS101.
Transfer Impedance:
-63 to -28 dBΩ

Related EMC Equipment & Solutions

Rent AH Systems BCP-611 10 KHz – 150 MHz Broadband Current Probe

Rent AH Systems BCP-611 10 KHz – 150 MHz Broadband Current Probe

SKU: sku-257

Weight: 1.4 Lbs (650 grams)
Aperture: 1.25" (32 mm)
Application/Test Type: Measure currents on 50 Hz, 60 Hz and 400 Hz powerlines without making direct contact with the source conductor or metallic surface
Current Rating: 400 Amps (5,000 Peak) Maximum
Frequency Range: 10 KHz to 150 MHz
RF Connector: N-Type(female)
Standards Met: IEC 61000-4-16, IEC 61000-4-19 Annex C, SAE J1113-2, ISO 11452-8, DO 160D/E Section 18 and MIL-STD-461 D/E CS101, CS109 and RS101.
Transfer Impedance: -63 to -28 dBΩ
View Product View Product
AH Systems BCP-614 Probe to Measure Conducted RF Currents, 10 KHz - 300 MHz

AH Systems BCP-614 Probe to Measure Conducted RF Currents, 10 KHz - 300 MHz

SKU: sku-379

Weight: 5.5 lb.'s (2.5 Kg)
Aperture: 2.6" (66 mm)
Application/Test Type: Conducted and Radiated Susceptibility Testing
Current Rating: 350 Amps
Dimensions: 4.27" (134 mm)
Frequency Range: 10 KHz - 300 MHz
RF Connector: N-Type (female)
Standards Met: IEC 61000-4-6; IEC 60601-1-2, Mil-STD-461 CS 114
Transfer Impedance: -25 to 1 (dBohm)
$3,500.00
Typically In Stock
Ordering Options
FCC Fischer F-51B Current Probe - The EMC Shop

FCC Fischer F-51B Current Probe, 10 kHz - 500 MHz

SKU: sku-725

Top Frequency Range: 400 MHz
Bottom Frequency Range: 10 kHz
AC Current Handling (DC-400Hz): 200 Amps
RF Current Handling (CW/Pulse): 10/100 Amps
Style: Clamp On
Diameter: 1.25"
Transfer Impedance: 5.6 Ohms
Test Standards: ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 CS114
View Product Cart
Solar Type 9123-1N RF Current Probe 10 kHz to 500 MHz

Solar Type 9123-1N RF Current Probe 10 kHz to 500 MHz

SKU: sku-508

Test Standards: DO-160 Section 20, MIL-STD-461
Weight: 1.2 pounds (0.55 kg)
Connector type: Type "N" female
Frequency range: 10 kHz to 500 MHz
General Data: Technical Details
Maximum peak current: 60 A maximum
Maximum rms current: 200 A DC to 400 Hz
Output resistance: 50 Ω
Probes: Current monitoring
Style: clamp on
Transfer impedance (ZT): 1.0 to 5.0 Ω above 300 kHz
Window diameter: 4.5" (11.43 cm)
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form