EHFP-30 E & H Field Probe Set, up to 1 GHz - The EMC Shop

EHFP-30 E & H Field Probe Set, up to 1 GHz

Condition:
Used
Frequency:
Up to 1000 MHz
Connectors:
BNC
For Use With:
EMI receivers, spectrum analyzers, oscilloscopes

 

Availability:

Typically In Stock

SKU:
30103

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

EHFP-30 E & H Field Probe Set, up to 1 GHz Description:

The Electro-Metrics EHFP-30 Hand Held Probe Set is designed to assist in pinpointing the specific source of emissions during the diagnostic testing phase of an EMI compliance investigation. A selection of probes of varying sensitivities is provided for both E-field and H-field analysis up to 1000 MHz.

Applications: When used with any 50 ohm measuring instrument the EHFP-30 set allows for easy identification of emission sources.

Configuration: All probes supplied with BNC connector and custom carrying case.

Videos

Key Considerations

Frequency:
Up to 1000 MHz
Connectors:
BNC
For Use With:
EMI receivers, spectrum analyzers, oscilloscopes

Related EMC Equipment & Solutions

Amplifier Research FA7006 6 GHz E-Field Probe

Amplifier Research FA7006 6 GHz E-Field Probe Kit

SKU: 11933

Test Standards: IEC 61000-4-3
Accuracy: ±1.0dB @ 10MHz1 0.8dB, 100kHz–1GHz3,4 1.4dB, 1GHz–6GHz3,4
Damage Level: 1000 V/m
Dimensions: 5.7 x 5.7 x 5.7cm
Linearity: ±0.5dB
Minimum Pulse Width: 2μs
Operating Range: 9 – 900V/m
Rise time: Typical Analog 300nS
Temperature Stability: ±1.0dB, 10°C - 40°C8
Typically In Stock
View Product Cart
ETS-Lindgren 7405 E & H Near Field Probe Set

ETS-Lindgren 7405 E & H Near Field Probe Set

SKU: sku-396

Weight: 2 lbs (0.91 kg)
Current Rating: 800 mA (per line), 1.6 Amps (per pair)
Dimensions: 10.8” x 4.5” x 3.8” (275 mm x 115 mm x 96 mm)
Frequency Range: 150 kHz to 3 GHz
Isolation: 150 kHz to 1.5 MHz: 35 dB to 55 dB (increasing linearly with the log of freq.) 1.5 MHz to 30 MHz: 55 dB
Mains & EUT Connections: D-sub 25 pin female connectors
RF Connector: 50Ω N-type (female)
Standards Met: EN 55022 (CISPR 22), CISPR 16-1-2
Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)
View Product Cart
Narda EFD-1891 2 MHz - 18 GHz - The EMC Shop

Narda EFD-1891 E-Field Probe 2 MHz - 18 GHz

SKU: 7202

Measurement Range: 0.6 to 800 V/m (CW), 0.6 to 65 V/m typ. (True RMS)
Dynamic Range: 62.5 dB (nominal)
Flatness: +1/-1.5 dB (10 MHz to 3 GHz), +2/-1.5 dB (>3 GHz to 11 GHz)
Isotropic Deviation: ±1 dB (10 MHz to 5 GHz), ±2.25 dB (> 5 GHz to 18 GHz)
Applications: Broadcasting, telecommunications, and satellite
In Stock
View Product Cart
Narda EFD-9091 E-Field Probe 100 MHz to 90 GHz - The EMC Shop

Narda EFD-9091 E-Field Probe 100 MHz to 90 GHz

SKU: 8485

Measurement Range: 0.5 to 400 V/m (CW), Typ. 0.5 to 61.4 V/m (True RMS)
Dynamic Range: 58 dB (nominal)
Flatness: ±3 dB (300 MHz to 40 GHz), +3/-6 dB (100 MHz to 60 GHz)
Isotropic Deviation: ±1.25 dB (100 MHz to 10 GHz), ±2 dB (>10 GHz to 26.5 GHz)
Applications: Radio link, telecommunications, satellite, and radar
$795.00
In Stock
Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form