Com-Power CGC-255E Comb Generator 50 kHz - 400 MHz in 50 kHz/250 kHz steps

Condition:
New
Weight:
1 lbs / 0.5 kg
AC Power Adapter:
6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz
Application/Test Type:
Reference Signal Source for LISN verification
Battery:
6V NiMH, 1 Ah
Dimensions:
5 x 2.2 x 2.2 inches / 13.2 x 5.9 x 5.9 cm
Frequency Range:
50 kHz to 400 MHz in 50 kHz or 250 kHz steps
Mains & EUT Connections:
LISN Interface Plug NEMA 15-P type
Operation Time:
18 Hours Typical With Fully Charged Battery
Manufacturer:
Com-Power
Online Orders Ship Same Day

 

Availability:

Inquire for Availability

SKU:
11431

 

This product is available for shipping to North America and Western European countries.


Getting Started...

Check out our Google Reviews

Overview

Com-Power CGC-255E Description:

The CGC-255E Comb Generator is a conducted reference signal source to test Line Impedance Stabilization Network (LISN). The Comb generator output has the harmonics of the fundamental frequency. It has two user selectable frequency step sizes of 50 kHz and 250 kHz. This Comb Generator simulates an EUT generating conducted EMI noise. The CGC series Comb Generators have the standard NEMA three blade connector that can plug directly into any LISN with the matching EUT power socket. It can be attached to any other socket type using suitable adapter. The CGC-255E has high impedance to the external line voltage, AC or DC up to 230 V. This feature allows the Comb Generator to be used while the LISNs are connected to external power source. The CGC-255E is powered by rechargeable internal NimH batteries. The battery power eliminates the need for an external cabling that may interfere with the radiated signals. When fully charged, the battery allows continuous use of the Comb Generator for up to 18 hours. The Comb Generator and the charger are shipped with a custom wooden storage box.

Com-Power CGC-255E Application:

The main application of the CGC-255E Comb Generators is to quickly verify conducted emissions test setups. It is designed to plug directly into the EUT power socket of the LISN. The conducted noise output level of the Comb Generators are close to or above the CISPR 22 limits. Typical output plot is shown on the next page. Most EMI labs typically calibrate LISNs and other equipment (spectrum analyzers, cables, connectors, etc.) in the conducted emissions test setup at regular intervals. However, test equipment malfunctions may occur between any calibration interval and may go undetected until the next calibration. In the meantime, these malfunctions may produce erroneous test results. The time and resources lost due to these unforeseen errors can be avoided with the help of Comb Generator. With the Comb Generator, the test engineer will be able to quickly perform verification of the conducted test setup more frequently to assure accurate test results. Other possible applications of the CGC-255E Comb Generator could include production evaluation of components, such as cable shields and filters.

Com-Power CGC-255E Specifications:

  • Frequency: 50 kHz - 400 MHz
  • Application: Conducted Emissions LISN Verification
  • Frequency Step Size: 50 / 250 kHz step
  • Power: Battery 6 V NimH
  • Charger Output / Input: 6 VDC, 500 mA / 110 VAC 60 Hz or 230 VAC 50 Hz
  • LISN Interface Plug: Standard US plug ( NEMA 15-p type)
  • Weight: 1 lb / 0.5 kg
  • Size: 5 × 2.2 ×2.2 in / 13.2 × 5.9 ×5.9 cm

Key Considerations

Manufacturer:
Com-Power
Weight:
1 lbs / 0.5 kg
AC Power Adapter:
6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz
Application/Test Type:
Reference Signal Source for LISN verification
Battery:
6V NiMH, 1 Ah
Dimensions:
5 x 2.2 x 2.2 inches / 13.2 x 5.9 x 5.9 cm
Frequency Range:
50 kHz to 400 MHz in 50 kHz or 250 kHz steps
Mains & EUT Connections:
LISN Interface Plug NEMA 15-P type
Operation Time:
18 Hours Typical With Fully Charged Battery

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.