Teseq CDN T Series Coupling Network for Unscreened Communication/Data Lines

Teseq CDN T Series Coupling Network for Unscreened Communication/Data Lines

Weight:
0.5 kg (1.1 LB.'s)
Application/Test Type:
EMC testing for unscreened data communication/telecom lines (Power over Ethernet, 1100BaseT4, 100Base VG-AnyLan, 1000BaseT, Token ring, ISDN, 10BaseT, 100BaseTX, ATM, FDDI, TP-PMD
Common Mode Impedance:
10 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 80 MHz: 150 Ω +60 Ω / -45 Ω; 80 MHz to (230) 300 MHz: 150 Ω +60 Ω / -60 Ω
Current Rating:
400 mA (line), 800 mA (pair)
Decoupling of Common Mode Disturbance:
10 kHz: Over 20 dB; 1.5 MHz / 30 MHz: Over 55 dB; 80 MHz: Over 45 dB; 230 MHz: Over 35 dB;
Dimensions:
4.1 x 2.5 x 4.3 inches (10.5 cm x 6.5 cm x 11.0 cm)
Frequency Range:
150 kHz to 80 MHz (Optional 10 kHz - 230/300 MHz)
Mains & EUT Connections:
D-Sub adapter to RJ45 / RJ11 (1 mm banana on certain 10 kHz models)
RF Connector:
BNC, 50 Ω
RF Input Voltage:
20 Volts Max
Standards Met:
IEC 61000-4-6
Voltage Division Factor:
9.5 dB ±1 dB (10 kHz to 230 MHz: 10 dB ±1 dB)
Voltage Rating:
AC max. voltage (line to ground): 63 Volts DC max. voltage (line to ground): 100 Volts Test voltage: 200 VDC, 2 s
Manufacturer:
Teseq
Online Orders Ship Same Day

 

SKU:
sku-228

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

IEC / EN 61000-4-6 specifies the design and performance of a range of coupling / decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Teseq CDN T210A, T240A, T246A, T410A, T411A, T440A, T442A, T443A, T444A, T445A and T4A series is specially designed for testing single pair, with CDN T4xxA single and double pair, applications. Each CDN T2xxA and CDN T4xxA consist of one basic network (CDN T200A and CDN T400A) with D-Sub-25- connectors. The connections to a different pin configurations of the modular connectors (RJ11 / RJ45) in use is performed in adapters. An adapter set (ADR Txxx) consists of two same connecting adapters for the EUT- and AE- port and at least one set is part of each CDN of this series. Additional adapter sets are available. Teseq offers different kinds of CDN, prepared for the most important fixed pin- arrangements of RJ11 / RJ45- connectors and also versions for customer’s specific configuration.

Teseq CDN T8 is designed for tests on up to four unscreened balanced pairs. It consists of one basic network (CDN T800) with D-Sub-25- connectors and two adapter sets (ADR Txxx) for RJ11 and RJ45. An adapter set (ADR Txxx) has two similar connecting adapters for the EUT- and AE- port. The ADR T800 gives the connection to RJ45 sockets with pin-arrangements of EIA / TIA T568A respectively T568B. The adapter set ADR T811 offers application for RJ11.

The Teseq CDN T2-10, T4-10 and T8-10 series is specially designed for testing at a 10 kHz start frequency as required by standards like Namur NE21 and IEC 60945. Further CDN T2-10 and CDN T4-10 allow testing up to 300 MHz as required by CISPR 15. CDN T8-10 is made for four unscreened balanced pairs, allows testing up to 230 MHz and supports Ethernet with 1000BaseT. EUT and AE port are supplied with RJ45. CDN T2-10 and CDN T4-10 are supplied with 1 mm banana sockets for easy adaptation for different single pair, with CDN T4-10 double pair, applications.

Teseq CDN T Series Features:

  • Coupling networks designed for IEC/EN 61000-4-6
  • T series for unscreened balanced pairs of communication/data lines
  • 1 mm banana sockets for CDN T2-10 and CDN T4-10
  • D Sub 25 adapters to RJ11 and RJ45 sockets for CDN T2xxA, CDN T4xxA and CDN T8 products

Teseq CDN T Series Configurations:

  • CDN T2-10: CDN T2, 10 kHz to 300 MHz, 1 mm banana
  • CDN T2-10S: CDN T2, 10 kHz to 300 MHz, 1 mm banana, incl. calibration adapter in storage case
  • CDN T210A: CDN T200A with adapter set RJ11 customer specific in storage case
  • CDN T240A: CDN T200A with adapter set RJ45 customer specific in storage case
  • CDN T246AS: CDN T200A with RJ45 adapter set (ADR T246) and calibration adapter in storage case
  • CDN T4-10S: CDN T4, 10 kHz to 300 MHz, 1 mm banana, incl. calibration adapter in storage case
  • CDN T411A: CDN T400A with RJ11 (ADR T411) adapter set in storage case
  • CDN T4AS: CDN T400A with 5 different adapter sets (ADR T411, T442, T443, T444 and T445) and calibration adapter in storage case
  • CDN T8: 80 MHz, with RJ 11 (ADR T811) and RJ 45 (ADR T800) adapter sets in storage case, suitable for 1 Gbps and PoE application
  • CDN T8S: 80 MHz, with RJ 11 (ADR T811), RJ 45 (ADR T800) adapter sets and calibration adapter in storage case
  • CDN T8-10S: CDN T8, 10 kHz to 230 MHz, RJ45, calibration adapter in storage case

Key Considerations

Manufacturer:
Teseq
Weight:
0.5 kg (1.1 LB.'s)
Application/Test Type:
EMC testing for unscreened data communication/telecom lines (Power over Ethernet, 1100BaseT4, 100Base VG-AnyLan, 1000BaseT, Token ring, ISDN, 10BaseT, 100BaseTX, ATM, FDDI, TP-PMD
Common Mode Impedance:
10 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 80 MHz: 150 Ω +60 Ω / -45 Ω; 80 MHz to (230) 300 MHz: 150 Ω +60 Ω / -60 Ω
Current Rating:
400 mA (line), 800 mA (pair)
Decoupling of Common Mode Disturbance:
10 kHz: Over 20 dB; 1.5 MHz / 30 MHz: Over 55 dB; 80 MHz: Over 45 dB; 230 MHz: Over 35 dB;
Dimensions:
4.1 x 2.5 x 4.3 inches (10.5 cm x 6.5 cm x 11.0 cm)
Frequency Range:
150 kHz to 80 MHz (Optional 10 kHz - 230/300 MHz)
Mains & EUT Connections:
D-Sub adapter to RJ45 / RJ11 (1 mm banana on certain 10 kHz models)
RF Connector:
BNC, 50 Ω
RF Input Voltage:
20 Volts Max
Standards Met:
IEC 61000-4-6
Voltage Division Factor:
9.5 dB ±1 dB (10 kHz to 230 MHz: 10 dB ±1 dB)
Voltage Rating:
AC max. voltage (line to ground): 63 Volts DC max. voltage (line to ground): 100 Volts Test voltage: 200 VDC, 2 s

Related EMC Equipment & Solutions

Teseq CDN AF Series Coupling/Decoupling Network for Unscreened/Unbalanced Lines

Teseq CDN AF Series Coupling/Decoupling Network for Unscreened/Unbalanced Lines

SKU: sku-230

Weight: 1.5 kg (3.3 lbs)
Application/Test Type: Coupling / decoupling network (CDN) used for all unscreened, unbalanced lines, carrying low current
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 2300 MHz: 150 Ω +60 Ω / -45 Ω; 230 MHz to 300 MHz 1): 150 Ω +60 Ω / -60 Ω
Current Rating: 200 mA to 4 Amps (refer to data sheet for exact model specifications)
Decoupling of Common Mode Disturbance: 10 kHz: Over 10 dB:150 kHz: Over 35 dB: 26 MHz: Over 45 dB: 80 MHz: Over 25 dB;150 kHz: Over 30 dB: 1.5 MHz: Over 60 dB: 30 MHz: Over 50 dB: 230 MHz: Under 30 dB (refer to data sheet for some exceptions)
Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)
Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230/300 MHz
Mains & EUT Connections: 4 mm banana or D-Sub 25 pins
RF Connector: BNC 50 Ω
RF Input Voltage: 30 Volts Max
Standards Met: IEC 61000-4-6, CISPR 15
Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB, 10 dB ±1 dB for CDN A501, A701, A801; 80 MHz to 300 MHz 1): 9.5 dB +3 dB / -2 dB 10 dB +3 dB / -2 dB for CDN A501, A701, A801; All other models 10 dB ±1 dB
Voltage Rating: AC max. voltage (line to ground): 63V - 160V; DC max. voltage (line to ground): 100V - 250V; Test voltage: 250 V - 400 V DC, 2 sec (refer to data sheet for exact model specifications)
View Product View Product
Teseq CDN 117 2-Wire Data Line Coupling Network

Teseq CDN 117 2-Wire Data Line Coupling Network

SKU: sku-108

Weight: 2.1 kg (4.6 lbs)
Application/Test Type: 1.2 / 50 μs pulse up to 6.6 kV
Coupling: INA 170: spark gap device, 90 V trip voltage; INA 174A: capacitor 0.5 μF
Current Rating: 1.5 Amps
Decoupling chokes 1 kHz: 20 mH nominal
Dimensions: 300 mm x 55 mm x 80 mm
Ohmic resistance per path: Less than 2.5 Ω
RF Connector: 4 mm safety banana; Fischer 103
Series resistor: 2 x 40 Ω, 6 W
Transmission 3 dB BW: 800 Hz
Voltage Rating: 250 Volts AC/DC
$3,080.00
Ordering Options
Teseq CDN HSS-2 Coupling Decoupling Network for High Speed Communication Lines

Teseq CDN HSS-2 Coupling Decoupling Network for High Speed Communication Lines

SKU: sku-114

Application/Test Type: ISDN, 10/100BaseT, 1000BaseT etc., switchable per jumper, PoE applicable; 2 kV* (1.2/50 μs pulse as per IEC/EN 61000-4-5); Max. surge test current: 50 A (8/20 μs pulse as per IEC/EN 61000-4-5)
Current Rating: 1 A (rated for Power over Ethernet)
Insertion Loss: 9 dB at 100 MHz
Mains & EUT Connections: RJ45 female; HV connector female (Fischer D103A023)
Standards Met: IEC 61000-4-5 Ed. 3
Voltage Rating: 100 VDC between pairs
$995.00
RENTAL ONLY
Ordering Options
Teseq CDN M416 4-Line Coupling/Decoupling Network

Teseq CDN M416 4-Line Coupling/Decoupling Network

SKU: sku-225

Weight: 700 grams (1.5 LB.'s)
Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)
Common Mode Impedance: 150 Ω +10/-20 Ω
Current Rating: 10 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
Voltage Division Factor: 20 dB ±1.5 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product View Product
Teseq CDN ST08 Coupling Decoupling Network - The EMC Shop

Teseq CDN ST08 Coupling Decoupling Network

SKU: 8413

Frequency Range: 10 kHz to 80 MHz
Application: CDN for screened eight lines with RJ45 connector
Current Rating: 1000 mA
EUT Connector: BNC 50 Ω
Common mode impedance (EUT Port) 10 kHz to 26 MHz: 150 Ω ±20 Ω
Common mode impedance (EUT Port) 26 MHz to 80 MHz: 150 Ω +60 Ω /-45 Ω
RF Voltage: <20 V
$1,600.00
Typically in Stock
Teseq CDN M316 Coupling/Decoupling Network (CDN) CDN M3 Type

Teseq CDN M316 Coupling/Decoupling Network (CDN) CDN M3 Type

SKU: sku-224

Weight: 700 grams (1.5 LB.'s)
Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)
Common Mode Impedance: 150 Ω +10/-20 Ω
Current Rating: 10 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
Voltage Division Factor: 20 dB ±1.5 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product Cart
Teseq CDN S Series Coupling Network for Screened or Coaxial Cables

Teseq CDN S Series Coupling Network for Screened or Coaxial Cables

SKU: 4255

Application/Test Type: Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cables
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating: 250 mA (CDN ST08 1 Amp)
Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)
Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230 MHz
Mains & EUT Connections: BNC 50 Ω, N 50 Ω, BNC 75 Ω, N 75 Ω, XLR 3 pins, DIN 5 pins, RJ45, D-Sub 9 pins, D-Sub 15 pins, D-Sub 25 pins, HDMI (refer to data sheet for exact model specifications)
RF Connector: BNC 50 Ω
RF Input Voltage: 20 Volts Max
Standards Met: IEC 61000-4-6, CISPR 22, IEC 60601-1-2
Voltage Division Factor: 9.5 dB to 10 dB ±1 dB (refer to data sheet for some exceptions)
Voltage Rating: AC max. voltage (line to ground): 100 V - 250V; DC max. voltage (line to ground): 150 V - 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)
$710.00
Ordering Options
Com-Power CDN-M525E 5-Line Coupling Decoupling Network for Unscreened Power Lines

Com-Power CDN-M525E 5-Line Coupling Decoupling Network for Unscreened Power Lines

SKU: sku-91

Weight: 5 lbs. 2.3 kg
Application/Test Type: five conductor power cable
Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
Current Rating: 25 Amps AC / 17 Amps DC (Max)
Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)
Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cm
Frequency Range: 150 kHz to 230 MHz
Mains & EUT Connections: 4 mm shrouded banana sockets
RF Connector: 50 Ω BNC (Female)
RF Input Voltage: 40 V (Max)
Standards Met: IEC / EN 61000-4-6
Voltage Division Factor: 9.5 dB +4 / -1
Voltage Rating: 250 V AC / 350 V DC (Line to Ground)
View Product Cart
Com-Power CDN-M225E Coupling Decoupling Network for Unscreened Power Supply Lines

Com-Power CDN-M225E Coupling Decoupling Network for Unscreened Power Supply Lines

SKU: sku-54

Weight: 5 lbs. 2.3 kg
Application/Test Type: two conductor power cable
Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
Current Rating: 25 Amps AC / 17 Amps DC (Max)
Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)
Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cm
Frequency Range: 150 kHz to 230 MHz
Mains & EUT Connections: 4 mm shrouded banana sockets
RF Connector: 50 Ω BNC (Female)
RF Input Voltage: 40 V (Max)
Standards Met: IEC / EN 61000-4-6
Voltage Division Factor: 9.5 dB +4 / -1
Voltage Rating: 250 V AC / 350 V DC (Line to Ground)
View Product View Product

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form