Teseq CDN 3083-Surge 620 Volt, 100-200 Amp Manual Coupler

Teseq CDN 3083-Surge 620 Volt, 100-200 Amp Manual Coupler

Weight:
80 kg (176 LB's)
Application/Test Type:
Manual Surge Testing for EUT up to 100Amps, 620 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)
Current Rating:
100 Amp or 200 Amp continous depending on model
Dimensions:
850 x 520 x 345 mm
Mains & EUT Connections:
Fischer 105 series; Screw terminals, rated for 230 A
RF Input Voltage:
Max. 8 kV / 4 kA
Standards Met:
IEC / EN 61000-4-5:2005, ANSI C62.45 standard, in IEC / EN 61000-4-12:2006 and ANSI C62.41
Voltage Rating:
620 VAC RMS L-to-L (max. 440 V for NSG 3040 and Modula); 620 VAC RMS L-to-PE (max. 440 V for NSG 3040 and Modula); 620 VDC
Manufacturer:
Teseq
Online Orders Ship Same Day

 

SKU:
sku-220

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

Teseq CDN 3083-Surge Description:

The Teseq CDN 3083 manual coupling/decoupling network fulfills the requirements specified in the surge standard IEC / EN 61000-4-5: 2014. Designed for convenient use in a wide variety of test environments, the CDN 3083 can be placed on the floor or table-top or may be mounted on a wall in an EMC laboratory or development workshop. Since high current couplers must often be taken to remote test sites, the Teseq CDN 3083 can be easily disassembled into handy modules for moving.

The unit is fitted with wheels and brakes for use on ramps or uneven surfaces. Currents over 100 Amps per phase are allowed for short test periods (CDN 3083-S100). The CDN 3083 is designed to withstand frequently encountered inrush currents and, in extreme cases, can be overstressed until the internal environment has reached the maximum temperature.

Rugged connection terminals, as well as a solid housing are featured to ensure safe, reliable operation. The CDN 3083 is tested for safety in compliance with IEC 61010. Surge levels up to 8 kV / 4 kA with 1.2 / 50 μs combination wave can be coupled by the CDN 3083.

EUT supply voltages of up to 620 V rms or 620 VDC at 100 A are supported. The CDN 3083 is designed for simple and safe manual operation. All symmetrical and asymmetrical coupling modes of IEC / EN 61000-4-5 and ANSI C62.41 are supported by the CDN 3083.

Teseq CDN 3083 Features:

  • Suitable for 3 Phase Combination wave & Ring wave Surge Test
  • EUT Current: 3 x 100 Amp continuous
  • EUT Voltage: 620 Volts RMS
  • Manual CDN compatible with most transient immunity generators
  • Complies with IEC / EN 61000-4-5 and ANSI C62.45

Teseq CDN 3083 Configurations:

  • CDN 3083-S100 (Surge Only):
    • 100A 3-phase coupling / decoupling network
    • 620V with NSG 3060, 440V with NSG 3040 for surges to 8kV
    • requires INA 3080, 3084, 3085 or CDN 3061-x16. Traceable calibration certificate
  • CDN 3083-S200 (Surge Only):
    • 200A 3-phase coupling / decoupling network
    • 620V with NSG 3060, 440V with NSG 3040 for surges to 8kV
    • requires INA 3080, 3084, 3085 or CDN 3061-x16. Traceable calibration certificate

Teseq CDN 3083 Coupling Sets:

  • INA 3080 IEC: IEC Coupling Set for CDN 3083

  • INA 3080 ANSI/IEC: ANSI/IEC Coupling Set for CDN 3083

Teseq CDN 3083 Calibration Options:

  • NIST Standard Configuration
  • ISO 17025

Key Considerations

Manufacturer:
Teseq
Weight:
80 kg (176 LB's)
Application/Test Type:
Manual Surge Testing for EUT up to 100Amps, 620 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)
Current Rating:
100 Amp or 200 Amp continous depending on model
Dimensions:
850 x 520 x 345 mm
Mains & EUT Connections:
Fischer 105 series; Screw terminals, rated for 230 A
RF Input Voltage:
Max. 8 kV / 4 kA
Standards Met:
IEC / EN 61000-4-5:2005, ANSI C62.45 standard, in IEC / EN 61000-4-12:2006 and ANSI C62.41
Voltage Rating:
620 VAC RMS L-to-L (max. 440 V for NSG 3040 and Modula); 620 VAC RMS L-to-PE (max. 440 V for NSG 3040 and Modula); 620 VDC

Related EMC Equipment & Solutions

Teseq CDN 3083-Burst 1000 Volt, 100-200 Amp Coupler for EFT/Burst

Teseq CDN 3083-Burst 1000 Volt, 100-200 Amp Coupler for EFT/Burst

SKU: sku-221

Weight: 11 kg (24 lbs)
Application/Test Type: EFT/Burst immunity testing of equipment requiring large currents, specially designed for heavy industry, smart grid and electro vehicle applications.
Current Rating: 100 Amp or 200 Amp continous depending on model
Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)
Mains & EUT Connections: SHV; Screw terminals, rated for 200 A
Standards Met: IEC / EN 61000-4-4 up to 8.8 kV
Voltage Rating: 690 V AC RMS; 1000 VDC
$395.00
In Stock
Ordering Options
Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts

Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts

SKU: sku-219

Application/Test Type: Automated Surge Immunity Testing
Current Rating: 3 x 100 Amp continuous (peak 3 x 150 Amp for 30 min.)
Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)
Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45, IEC / EN 61000-4-12:2006 and ANSI C62.41
Voltage Rating: 480 VAC rms Line to Line
Inquire for Availability
View Product Cart
Teseq CDN 3063-S63 3 Phase, 63 Amp Automated Surge CDN Coupler for NSG 3040/3060

Teseq CDN 3063-S63 3 Phase, 63 Amp Automated Surge CDN Coupler for NSG 3040/3060

SKU: sku-218

Weight: 100 kg (220.5 lb)
Application/Test Type: Automated Surge Testing for EUT up to 63 Amps, 480 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)
Current Rating: 3 x 63 Amp continuous (peak 3 x 100 Amp for 30 min.)
Dimensions: 570 x 840 x 630mm (22.4 x 33 x 24.8")
Frequency Range: DC – 65 Hz with no loss, 400 Hz max. with power loss
Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)
Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45 standard, in IEC / EN 61000-4-12:2006 and ANSI C62.41
Voltage Rating: EUT VAC line to line: 30 to 480 VAC rms; EUT VAC line to ground: EUT VAC 30 to 280 VAC rms, (below 30 V synchronisation not guaranteed, asynchronous mode only); EUT VDC: up to 125 VDC – full current range, up to 225 VDC – up to 7 A
Inquire for Availability
View Product Cart
Teseq CDN M432 32 Amp Coupling/Dcoupling Network

Teseq CDN M432 32 Amp Coupling/Dcoupling Network

SKU: sku-226

Weight: 6.5 kg (14.3 LB.'s)
Application/Test Type: 4 mains AC power lines emissions testing up to 32 Amps (2L+N+PE), (3L+PE), optional (3L+N)
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating: 32 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6
Voltage Division Factor: 10 dB +3 dB / -1 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product View Product
Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network

Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network

SKU: 10827

Associated Equipment: RF Conducted Immunity Test Systems
Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating: 16 Amps
Decoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB
Dimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)
Frequency Range: 150 kHz to 230 MHz
Insertion Loss: Less than 0.1 dB
Mains & EUT Connections: 4 mm banana
RF Connector: BNC 50 Ω
RF Input Voltage: 30 Volts (Max)
Standards Met: IEC/EN 61000-4-6
Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB 80 MHz to 230 MHz: 9.5 dB +3 dB / -2 dB
Voltage Rating: AC max. voltage (line to ground): 250 V DC max. voltage (line to ground): 400 V; 3 kV DC, 2 sec
$395.00
Typically In Stock
Ordering Options
Teseq CDN M316 Coupling/Decoupling Network (CDN) CDN M3 Type

Teseq CDN M316 Coupling/Decoupling Network (CDN) CDN M3 Type

SKU: sku-224

Weight: 700 grams (1.5 LB.'s)
Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)
Common Mode Impedance: 150 Ω +10/-20 Ω
Current Rating: 10 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
Voltage Division Factor: 20 dB ±1.5 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form