Com-Power CDN-M525E 5-Line Coupling Decoupling Network for Unscreened Power Lines

Com-Power CDN-M525E 5-Line Coupling Decoupling Network for Unscreened Power Lines

Weight:
5 lbs. 2.3 kg
Application/Test Type:
five conductor power cable
Common Mode Impedance:
150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
Current Rating:
25 Amps AC / 17 Amps DC (Max)
Decoupling of Common Mode Disturbance:
≥ 40dB (EUT/AE)
Dimensions:
6 x 6 x 13 inches 15.2 x 15.2 x 33 cm
Frequency Range:
150 kHz to 230 MHz
Mains & EUT Connections:
4 mm shrouded banana sockets
RF Connector:
50 Ω BNC (Female)
RF Input Voltage:
40 V (Max)
Standards Met:
IEC / EN 61000-4-6
Voltage Division Factor:
9.5 dB +4 / -1
Voltage Rating:
250 V AC / 350 V DC (Line to Ground)
Manufacturer:
Com-Power
Online Orders Ship Same Day

 

SKU:
sku-91

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

Com-Power CDN-M525E is a part of the series of Coupling/Decoupling Networks designed specifically for testing product for conducted immunity per IEC/EN 61000-4-6. The CDN-M525E is designed for testing products that uses five conductor power cable. It has five 4 mm shrouded banana socket for both EUT and AE power connections. The CDN-M525E can handle up to 25 Amps AC and 17 Amps DC of current. The RF disturbance signal coupling port is female BNC. It can handle up to 40V of RF input Voltage. The bottom surface of the CDN is not painted for easy and effective grounding.

All Com-Power CDNs are individually calibrated. The Com-Power CDN-M525E fully complies with the requirement contained in the IEC 61000-4-6 and CISPR 16-1-2. All Com-Power CDNs can be purchased separately or as part of the CIS series conducted immunity test system. This is a pre-packaged solution that includes an ACS series power amplifier and all accessories required for the test.

Application

During conducted Immunity testing, CDNs are utilized to provide a means of coupling RF common mode signals to each line. In addition, CDNs provide the required common mode impedance to the EUT, isolation to the auxiliary equipment via common mode decoupling of the disturbance signals and provide uninterrupted communication between the EUT and auxiliary equipment.

Before you begin testing with the CDN-M525E you will need to establish calibrated drive levels corresponding to your desired test levels. During drive level calibration, the RF signal level being injected to the CDN is adjusted incrementally until the voltage level measured at the 150Ω to 50Ω adapter (ADA-515-2) connected to the EUT port is approximately equal to the Umr value given in the table below. The ADA-515-2 and accessories needed for this test are available from Com-Power.

Test Levels
Open Circuit Voltage 		Umr
1 0.167
3 .5
< 10 1.67

Umr= Voltage level measured at the output of the 150Ω to 50Ω adapter (ADA-515-2)

Typical Data

 

CDN M-525E Accessory Kit:

  • QTY 1: M525E Coupling/Decoupling Network
  • QTY 2: Shorting Adapter Set ADA-M525E
  • QTY 1: Calibration Certificate
  • 3 Year Warranty
  • TEP-050, 50 Ohm Terminator (Recommended Add-on - non-standard)

Key Considerations

Manufacturer:
Com-Power
Weight:
5 lbs. 2.3 kg
Application/Test Type:
five conductor power cable
Common Mode Impedance:
150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
Current Rating:
25 Amps AC / 17 Amps DC (Max)
Decoupling of Common Mode Disturbance:
≥ 40dB (EUT/AE)
Dimensions:
6 x 6 x 13 inches 15.2 x 15.2 x 33 cm
Frequency Range:
150 kHz to 230 MHz
Mains & EUT Connections:
4 mm shrouded banana sockets
RF Connector:
50 Ω BNC (Female)
RF Input Voltage:
40 V (Max)
Standards Met:
IEC / EN 61000-4-6
Voltage Division Factor:
9.5 dB +4 / -1
Voltage Rating:
250 V AC / 350 V DC (Line to Ground)

Related EMC Equipment & Solutions

Com-Power CDN-M225E Coupling Decoupling Network for Unscreened Power Supply Lines

Com-Power CDN-M225E Coupling Decoupling Network for Unscreened Power Supply Lines

SKU: sku-54

Weight: 5 lbs. 2.3 kg
Application/Test Type: two conductor power cable
Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
Current Rating: 25 Amps AC / 17 Amps DC (Max)
Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)
Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cm
Frequency Range: 150 kHz to 230 MHz
Mains & EUT Connections: 4 mm shrouded banana sockets
RF Connector: 50 Ω BNC (Female)
RF Input Voltage: 40 V (Max)
Standards Met: IEC / EN 61000-4-6
Voltage Division Factor: 9.5 dB +4 / -1
Voltage Rating: 250 V AC / 350 V DC (Line to Ground)
View Product View Product
Com-Power CDN-M125E Coupling Decoupling Network

Com-Power CDN-M125E Coupling Decoupling Network

SKU: sku-20

Weight: 5 lbs. 2.3 kg
Application/Test Type: Single conductor power cable
Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
Current Rating: 25 Amps AC / 17 Amps DC (Max)
Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)
Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cm
Frequency Range: 150 kHz to 230 MHz
Mains & EUT Connections: 4 mm shrouded banana sockets
RF Connector: 50 Ω BNC (Female)
RF Input Voltage: 40 V (Max)
Standards Met: IEC / EN 61000-4-6
Voltage Division Factor: 9.5 dB +4 / -1
Voltage Rating: 250 V AC / 350 V DC (Line to Ground)
View Product Cart
Teseq CDN AF Series Coupling/Decoupling Network for Unscreened/Unbalanced Lines

Teseq CDN AF Series Coupling/Decoupling Network for Unscreened/Unbalanced Lines

SKU: sku-230

Weight: 1.5 kg (3.3 lbs)
Application/Test Type: Coupling / decoupling network (CDN) used for all unscreened, unbalanced lines, carrying low current
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 2300 MHz: 150 Ω +60 Ω / -45 Ω; 230 MHz to 300 MHz 1): 150 Ω +60 Ω / -60 Ω
Current Rating: 200 mA to 4 Amps (refer to data sheet for exact model specifications)
Decoupling of Common Mode Disturbance: 10 kHz: Over 10 dB:150 kHz: Over 35 dB: 26 MHz: Over 45 dB: 80 MHz: Over 25 dB;150 kHz: Over 30 dB: 1.5 MHz: Over 60 dB: 30 MHz: Over 50 dB: 230 MHz: Under 30 dB (refer to data sheet for some exceptions)
Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)
Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230/300 MHz
Mains & EUT Connections: 4 mm banana or D-Sub 25 pins
RF Connector: BNC 50 Ω
RF Input Voltage: 30 Volts Max
Standards Met: IEC 61000-4-6, CISPR 15
Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB, 10 dB ±1 dB for CDN A501, A701, A801; 80 MHz to 300 MHz 1): 9.5 dB +3 dB / -2 dB 10 dB +3 dB / -2 dB for CDN A501, A701, A801; All other models 10 dB ±1 dB
Voltage Rating: AC max. voltage (line to ground): 63V - 160V; DC max. voltage (line to ground): 100V - 250V; Test voltage: 250 V - 400 V DC, 2 sec (refer to data sheet for exact model specifications)
View Product View Product
Com-Power CDN-C75E Coupling Decoupling Network for Screened Cables

Com-Power CDN-C75E Coupling Decoupling Network for Screened Cables

SKU: sku-96

Weight: 5 lbs. 2.3 kg
Application/Test Type: 75 Ohm Coaxial Cables
Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
Current Rating: 1 Amp (Max)
Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)
Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cm
Frequency Range: 150 kHz to 230 MHz
Mains & EUT Connections: 1 Amp (Max) AE and EUT Connections 50 Ohm Female BNC
RF Connector: 50 Ω BNC (Female)
RF Input Voltage: 40 V (Max)
Standards Met: IEC / EN 61000-4-6
Voltage Division Factor: 9.5 dB +4 / -1
Voltage Rating: 310 V AC / 440 V DC (Line to Ground)
View Product Cart
Com-Power CDN-C50E Coupling Decoupling Network for Screened Cables

Com-Power CDN-C50E Coupling Decoupling Network for Screened Cables

SKU: sku-95

Weight: 5 lbs. 2.3 kg
Application/Test Type: 50 Ohm Coaxial Cables
Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
Current Rating: 1 Amp (Max)
Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)
Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cm
Frequency Range: 150 kHz to 230 MHz
Mains & EUT Connections: 1 Amp (Max) AE and EUT Connections 50 Ohm Female BNC
RF Connector: 50 Ω BNC (Female)
RF Input Voltage: 40 V (Max)
Standards Met: IEC / EN 61000-4-6
Voltage Division Factor: 9.5 dB +4 / -1
Voltage Rating: 310 V AC / 440 V DC (Line to Ground)
View Product Cart
Com-Power CDN-M325E 150 kHz - 230 MHz 3-Line RF Coupling Decoupling Network

Com-Power CDN-M325E 150 kHz - 230 MHz 3-Line RF Coupling Decoupling Network

SKU: sku-89

Weight: 5 lbs. 2.3 kg
Application/Test Type: Three conductor power cable
Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
Current Rating: 25 Amps AC / 17 Amps DC (Max)
Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)
Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cm
Frequency Range: 150 kHz to 230 MHz
Mains & EUT Connections: 4 mm shrouded banana sockets
RF Connector: 50 Ω BNC (Female)
RF Input Voltage: 40 V (Max)
Standards Met: IEC / EN 61000-4-6
Voltage Division Factor: 9.5 dB +4 / -1
Voltage Rating: 250 V AC / 350 V DC (Line to Ground)
$1,395.00
Com-Power CDN-M425E 3-Phase + Earth Coupling Decoupling Network

Com-Power CDN-M425E 3-Phase + Earth Coupling Decoupling Network

SKU: sku-90

Weight: 5 lbs. 2.3 kg
Application/Test Type: Four conductor power cable
Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
Current Rating: 25 Amps AC / 17 Amps DC (Max)
Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)
Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cm
Frequency Range: 150 kHz to 230 MHz
Mains & EUT Connections: 4 mm shrouded banana sockets
RF Connector: 50 Ω BNC (Female)
RF Input Voltage: 40 V (Max)
Standards Met: IEC / EN 61000-4-6
Voltage Division Factor: 9.5 dB +4 / -1
Voltage Rating: 250 V AC / 350 V DC (Line to Ground)
View Product View Product
Teseq CDN M416 4-Line Coupling/Decoupling Network

Teseq CDN M416 4-Line Coupling/Decoupling Network

SKU: sku-225

Weight: 700 grams (1.5 LB.'s)
Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)
Common Mode Impedance: 150 Ω +10/-20 Ω
Current Rating: 10 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
Voltage Division Factor: 20 dB ±1.5 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product View Product

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form