Schwarzbeck CDN S8 RJ45 Coupling Decoupling Network

Frequency Range:
150 kH to 230 MHz
Max RF-test voltage (emf):
30 V
RF Input Power:
6 W (continuous)
Voltage division factor RF-input – EuT-por:
10 dB 150 kHz – 80 MHz: ±1 dB 80 MHz – 230 MHz: +3 dB / -2 dB
EuT, AE connectors:
RJ45
Test Standards:
IEC/EN 61000-4-6
Associated Equipment:
RF Conducted Immunity Test Systems
Manufacturer:
Schwarzbeck
Online Orders Ship Same Day
$1,295.00

 

SKU:
11220
Availability:

Lead time 4 to 6 weeks


Getting Started...

Overview

The CDN S8 RJ45 is part of the coupling decoupling network series for conducted common mode immunity testing according to IEC 61000-4-6. The CDN S8 RJ45 is compliant to IEC 61000-4-6 figure D.1 and is suitable for immunity testing on screened RJ45 lines.

The CDN S8 RJ45 is intended for measurements on devices with a shielded RJ45 interface, such as Ethernet networks in the frequency range from 150 kHz to 230 MHz. The circuitry is shown in Fig. 4.

All CDNs comply to the requirements of IEC 61000-4-6. Each CDN comes with individually measured data and a calibration certificate for the common mode impedance and the voltage division factor. Further typical data for the phase (not normative) can be found in fig. 2

A variety of calibration adapters and other accessories are available as option. With the two included adapters SA RJ45 in conjunction with the optional series resistor SR100-6W, the required spacing of 30 mm is obtained as depicted in Fig. 9 of IEC 61000-4-6.

The connection to ground can be accomplished using the ground plane of the CDN. Additionally there is a M4 thread located at the AE side to ground as well as a 4 mm socket to connect the device to ground.

Fig. 1: typ. EuT common mode Impedance
Fig. 2: typ. phase EuT-Port, (common mode)
Fig. 1: typ. EuT common mode impedance Fig. 2: typ. voltage division factor RF-port to EuT-port
Fig. 1: typ. EuT common mode Impedance
Fig. 4: Principal Circuitry CDN S8 RJ45
Fig. 3: typ. voltage division factor RF-port to EuT-port Fig. 4: principal circuitry CDN S8 RJ45

Specifications
Frequency range 150 kHz … 230 MHz
Common mode impedance 150 kHz – 24 MHz: 150 ? ±20 ?
24 MHz–80 MHz: 150 ? +60 ? / -45 ?
80 MHz – 230 MHz: 150 ? ±60 ?
Max. RF-test voltage (emf) 30 V
RF-input-power 6 W (continuous)
RF-input-connector 50 ? BNC (female)
Voltage division factor
RF-input – EuT-por
10 dB 150 kHz – 80 MHz: ±1 dB 80 MHz – 230 MHz: +3 dB / -2 dB
Housing material Aluminium
Housing dimensions 216 x 105 x 108 mm
Weight ca. 1.6 kg
EuT, AE connectors RJ45
Included accessories SA RJ45 (one unit included by default)
Optional accessories:
50 ? to 150 ? adapter
SR100-6W

Key Considerations

Manufacturer:
Schwarzbeck
Frequency Range:
150 kH to 230 MHz
Max RF-test voltage (emf):
30 V
RF Input Power:
6 W (continuous)
Voltage division factor RF-input – EuT-por:
10 dB 150 kHz – 80 MHz: ±1 dB 80 MHz – 230 MHz: +3 dB / -2 dB
EuT, AE connectors:
RJ45
Test Standards:
IEC/EN 61000-4-6
Associated Equipment:
RF Conducted Immunity Test Systems

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.