Name: Com-Power TEP-050 50 Ohm Terminator
Brand: Com-Power
SKU: sku-531
Availability: InStock

Com-Power CLA-050 10mm Absorbing Clamp

SKU: sku-265

Weight: 5 kg (11.5 lbs)

Aperture: 12.7 mm (0.5 inches)

Application/Test Type: Measurement of direct field strength from EUT supply cables

Clamp factor (CF): -3 dB to +4 dB

Dimensions: 627 x 114 x 144 mm (24.7 x .4.5 x 5.7 inches)

Frequency Range: 30 MHz to 1000 MHz

Isolated lines under test: Power supply lines and other connecting lines

Max. Cable Diameter: 10 mm (0.39 inches)

Min. site attenuation: 14 dB to 21 dB

RF Connector: BNC (f), 50 Ohms

Standards Met: CISPR 14

View Product

Com-Power CGC-255E Comb Generator 50 kHz - 400 MHz in 50 kHz/250 kHz steps

SKU: 11431

Weight: 1 lbs / 0.5 kg

AC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz

Application/Test Type: Reference Signal Source for LISN verification

Battery: 6V NiMH, 1 Ah

Dimensions: 5 x 2.2 x 2.2 inches / 13.2 x 5.9 x 5.9 cm

Frequency Range: 50 kHz to 400 MHz in 50 kHz or 250 kHz steps

Mains & EUT Connections: LISN Interface Plug NEMA 15-P type

Operation Time: 18 Hours Typical With Fully Charged Battery

Inquire for Availability

View Product

Com-Power CDN-M450E 4 Wire, 50 Amp RF Coupling Network Package

SKU: sku-1129

Weight: 8 lbs. or 3.6 kg

AE and EUT Connections: 5.2 mm shrouded banana sockets

Application: Four conductor power cable

Common Mode Impedance: 150 kHz - 24 MHz: 150Ω ± 20Ω 24 MHz - 80 MHz: 150Ω + 60Ω / -45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / -60Ω

Compliant Test Standards: IEC / EN 61000-4-6, CISPR 16-1-2

Current Rating: 50 Amps AC / 35 Amps DC (Max

Decoupling of Common Mode Disturbance: ≥40dB (EUT/AE)

Dimensions: 7 x 7 x 16 ¾ inches or 17.7 x 17.7 x 42.5 cm

RF Input Connector: 50 Ω BNC (Female)

RF Input Voltage: 40 V (Max)

Voltage Division Factor: 9.5 dB +3 / -0.5

Voltage Rating: 250 VAC / 350 VDC (Line to Ground)

$295.00

Ordering Options

Com-Power AC-220 CombiLog Antenna

SKU: sku-364

Weight: 10.5 lbs. [4.8 kg]

Antenna Factor (1 Meter): 6.2 to 27.7 (average: 16.9) [dB(m-1)]

Antennas: Biconical Antennas

Connector: N-type(female)

Dimensions: 50” x 27.6” x 38” [127 x 70.1 x 96.5 cm]

Frequency Range: 20 MHz to 2 GHz (as receive antenna - emissions) 80 MHz to 2 GHz (as transmit antenna - immunity)

Gain: -18.5 to 9.2 (average: 3.0) dBi

Impedance: 50 Ohms

Maximum Continuous Power: 500 Watts

VSWR: 1.06 to 3.93 (average: 1.78) :1

$5,760.00

Ordering Options

Com-Power AT-812 EMC Antenna Tripod

SKU: 0449

$3,075.00

Ordering Options

Com-Power LI-125A 150 kHz - 30 MHz LISN, 50 uH, 25 Amps (Discontinued)

SKU: sku-12

Weight: 25 lbs. / 11.3 kg

Application/Test Type: Power line conducted emissions tests

Current Rating: 25 Amps (AC), 17 Amps (DC)

Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm

Frequency Range: 150 kHz to 30 MHz

Inductors: 50 µH (air-core)

Insertion Loss: 0.5 dB (150 kHz to 30 MHz)

Isolation: 40 dB (150 kHz to 30 MHz)

Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets

RF Connector: 50Ω N-type (female)

Standards Met: CISPR 16-1-2 / ANSI C63.4

Voltage Rating: 270 VAC (Line to Ground), 380 VDC

View Product

Com-Power CDN-M125E Coupling Decoupling Network

SKU: sku-20

Weight: 5 lbs. 2.3 kg

Application/Test Type: Single conductor power cable

Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω

Current Rating: 25 Amps AC / 17 Amps DC (Max)

Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)

Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cm

Frequency Range: 150 kHz to 230 MHz

Mains & EUT Connections: 4 mm shrouded banana sockets

RF Connector: 50 Ω BNC (Female)

RF Input Voltage: 40 V (Max)

Standards Met: IEC / EN 61000-4-6

Voltage Division Factor: 9.5 dB +4 / -1

Voltage Rating: 250 V AC / 350 V DC (Line to Ground)

View Product

Com-Power CDN-M450E 150 MHz to 230 MHz Single line Plus Netural 50 Amp

SKU: sku-1016

Weight: 8 lbs. or 3.6 kg

AE and EUT Connections: 5.2 mm shrouded banana sockets

Application: Four conductor power cable

Common Mode Impedance: 150 kHz - 24 MHz: 150Ω ± 20Ω 24 MHz - 80 MHz: 150Ω + 60Ω / -45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / -60Ω

Compliant Test Standards: IEC / EN 61000-4-6, CISPR 16-1-2

Current Rating: 50 Amps AC / 35 Amps DC (Max

Decoupling of Common Mode Disturbance: ≥40dB (EUT/AE)

Dimensions: 7 x 7 x 16 ¾ inches or 17.7 x 17.7 x 42.5 cm

RF Input Connector: 50 Ω BNC (Female)

RF Input Voltage: 40 V (Max)

Voltage Division Factor: 9.5 dB +3 / -0.5

Voltage Rating: 250 VAC / 350 VDC (Line to Ground)

View Product

Com-Power CDN-M250E 150 kHz - 230 MHz Single line Plus Netural 50 Amp

SKU: sku-1018

Weight: 7 lbs. / 3.1 kg

Application: Two wire power cables

Common Mode Impedance: 150 kHz - 24 MHz: 15Ω ±20Ω 24 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω

Compliant Test Standards: IEC -61000-4-6, CISPR 16-1-2

Current Rating: 50 Amps (AC), 35 Amps (DC)

Dimensions: 7 x 7 x 16 ¾ inches 17.7 x 17.7 x 42.5 cm

Frequency range: 150 kHz to 230 MHz

I/O Connection: 5.2 mm banana socket with shrouded Sheath

I/O rating for EUT/AE Ports: 250 VAC, 350 VDC

Max Input Voltage: 40 V

RF Input Connector: 50 Ω BNC (female)

Voltage Division Factor: 9.5 dB +3 / -1 dB

View Product

Com-Power TEP-050 50 Ohm Terminator

Getting Started...

Overview

Key Considerations

Related EMC Equipment & Solutions

Com-Power CLA-050 10mm Absorbing Clamp

Com-Power CGC-255E Comb Generator 50 kHz - 400 MHz in 50 kHz/250 kHz steps

Com-Power CDN-M450E 4 Wire, 50 Amp RF Coupling Network Package

Com-Power AC-220 CombiLog Antenna

Com-Power AT-812 EMC Antenna Tripod

Com-Power LI-125A 150 kHz - 30 MHz LISN, 50 uH, 25 Amps (Discontinued)

Com-Power CDN-M125E Coupling Decoupling Network

Com-Power CDN-M450E 150 MHz to 230 MHz Single line Plus Netural 50 Amp

Com-Power CDN-M250E 150 kHz - 230 MHz Single line Plus Netural 50 Amp

Connect with The EMC Shop