Dissipative Mat for ISO 10605 ESD Testing

Dissipative Mat for ISO 10605 ESD Testing

Condition:
New
Dimensions:
43" by 31.5"
Thickness:
2-3 mm
Standard Met:
ISO 10605
Resistance:
3.1015 Ohm/cm3
Manufacturer:
The EMC Shop
$235.00

 

SKU:
6705
Availability:

In Stock

Getting Started...

Overview

The EMC Shop is an ISO 17025 accredited company specializing in automotive and electric vehicle (EV) EMC and ESD testing according to ISO 10605. The ISDP Insulation Support/Dissipative Mat per ISO 10605 non-chassis mounted DUT test setup requirement, is 2-3 mm thick, Resistance 3.1015 Ohm/cm3. Cut to size. 

Suitable ISO 10605 Automotive and EV ESD testing

Videos

Key Considerations

Manufacturer:
The EMC Shop
Dimensions:
43" by 31.5"
Thickness:
2-3 mm
Standard Met:
ISO 10605
Resistance:
3.1015 Ohm/cm3

Related EMC Equipment & Solutions

EM Test Automotive Test System for ISO 7637-2

EM Test Automotive Test System for ISO 7637-2

SKU: 10596

ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8
SAE Automotive Standards: SAE J1113, SAE J1455
Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohm
Input: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200N
Micropulse: Micropulse module for test pulses 1, 2A and 6
Trigger: automatic, manual, external, battery switch
UCS 200N Models: Built-in coupling/decoupling networks: UCS 200N50, 80V/50A, 100A@500ms; UCS 200N100, 80V/100A, 150A@500ms; UCS 200N150, 80V/150A UCS 200N200 80V/200A
Verification: As per Annex C of ISO 7637-2:2011 into 50ohm and 1,000ohm load
Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances
Inquire for availability
View Product Cart
EM Test ACC Capacitive Coupling Clamp for ISO 7637 Automotive Testing

EM Test ACC Capacitive Coupling Clamp for ISO 7637 Automotive Testing

SKU: sku-635

Weight: 11.5 kg
Application/Test Type: Electrical Fast Transients for automotive applications
Cable Diameter: up to 40 mm (1.57 in)
Coupling Length: 1 m (39.4 in)
Dimensions: 1250 mm x 300 mm x 93 mm, L x W x H
RF Connector: High voltage connector,coaxial. GND connection 4 mm plug, banana
Standards Met: ISO 7637
Voltage Rating: up to 1.0 kV
Inquire for availability
View Product Cart
EM Test ESD NX30 Electrostatic Discharge Simulator Gun System for up to 30kV Testing - The EMC Shop

EM Test ESD NX30 Electrostatic Discharge Simulator Gun System for up to 30kV Testing

SKU: 7395

Weight: 6.5 kg (Base Station) 1,250 g (discharge gun)
Voltage Range: 200 V - 30,000 V ± 5 %
Test Standards: ISO 10605, IEC 61000-4-2
Holding Time: More than 5 sec
Applications: EV and Automotive
Polarity: Pos / Neg
Pre-Programmed IEC Levels: Yes
Resolution: 100 V steps
Additional Test Standards: IEC 60601-1-2, MIL-STD-461 CS118, RTCA DO-160
$990.00
1 In Stock
Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form