EM Test (Ametek CTS)

EM Test (Ametek CTS) Test Equipment, Systems & Solutions

• 

  Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6

  SKU: sku-251

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6

  Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): 40Vrms

  BCI Test Levels (w/ built-in amplifier): 8Vrms

  Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

  View Product Cart

• 

  EM Test PFS 500 Power Fail Simulator for EN/IEC 61000-4-11

  SKU: sku-1292

  Test Standards: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

  Applications: Voltage dips, Voltage interruptions, Voltage variations, Inverse, EMC Precompliance Testing, Conducted Immunity

  EUT Power Handling: AC up to 240V/16A

  MSRP:

  Was:

  Price Now:

  $4,750.00

  1 Unit

• 

  Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6

  SKU: sku-921

  Weight: 17 kg (37.5 Pounds)

  Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applications

  Dimensions: 19"/3 HU

  Frequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHz

  Impedance: 50 Ohms

  Input: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)

  Maximum Continuous Power: 80W (nominal)

  Standards Met: IEC 61000-4-6

  Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, Service

  Voltage Rating: 1 V to 30 Volts Max

  View Product Cart

• 

  Rent EM Test TSS 500M2F Telecom Surge Simulator for FCC Part 68

  SKU: sku-776

  Weight: approx. 35kg

  Application/Test Type: Test levels as per FCC part 68

  Coupling: Telecom ports: Tip to Ground, Ring to Ground, Tip and Ring to Ground Power ports 250V/16A: L toN, L to PE, N to PE , L+N to PE

  Dimensions: 19“ / 6HU,

  Output Current: 64A – 1,000A (power line) 20 – 200A per wire (surge A)

  Outputs: 4 mm banana socket

  Polarity: pos / neg / alternate

  Rise time: Less than 2 us

  Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

  Test Voltage: 160V – 2,500V ± 10% (power line) 160V – 1,500V ± 10% (surge A)

  Trigger of bursts: Automatic pulse release

  View Product Cart

• 

  EM Test PFS 503N32 Power Fail Simulator, 3-phase 3x480V AC (p-p) max. 32A

  SKU: sku-549

  Weight: app. 28kg;

  Current Rating: Max. 32A

  Dimensions: 19"/6 HU

  Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

  Frequency: 50Hz/60Hz, Single phase application

  Output: 3-phase application L1, L2, L3, N and PE on the rear panel. 1-phase application L, N and PE on the front panel

  Peak current: Better than 500A

  Repetition rate: 0.01s to 9,999s

  Rise time: Between 1us and 5us for abrupt changes, generator loaded with resistive load

  Supply Voltage: 115V/230V; +10/-15%

  Test Voltage: 3x480V AC resp. 3x690V AC (L-L) 277V AC resp. 400V AC 360V DC resp. 600V DC (L-N)

  Trigger of bursts: Automatic

  View Product Cart

• 

  EM Test PFM 200N100.1 Automotive Power Fail Simulator for Power Supply and Data Lines

  SKU: 10479

  Test Standards: LV 124/LV 148, LV 123

  Inquire for Availability

  View Product Cart

• 

  EM Test Automotive Transient Emission Set for ISO 7637-2

  SKU: sku-476

  View Product Cart

• 

  EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave

  SKU: 10413

  Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHz

  Damping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value

  Oscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%

  Polarity: Positive, negative

  Rise Time: 75ns ± 20%

  Rise Time-2: 5 ns ±30%

  Source Impedance: 50 ohm ±20%

  Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%

  Weight: 32 kg (1-phase) 50 kg (3-phase)

  Slow Damped Oscillatory Waves: As Per EN/IEC 61000-4-18

  Burst Duration: At least 2s

  Damping Rate-2: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value

  Dimensions: 19" / 9 HU, approx. 19" / 9 HU, approx.

  Fast Damped Oscillatory Waves: As Per EN/IEC 61000-4-18

  Frequency: 100 kHz ± 10%

  General Data: Technical Details

  Impedance: 12ohm and 30ohm ± 20%

  Oscillation Frequency-2: 100kHz and 1MHz ± 10%

  Peak current: Max. 500A @ 12ohm or Max. 200A @ 30ohm internally;

  Polarity-2: Positive, negative

  Pulse repetition: 1 to 60 transients per minute

  Repetition Rate: Max. 5,000 /s ±10%

  Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

  Rise time: 0.5 us ± 30%

  Source impedance: 200ohm ± 20%

  Spike frequency: 100kHz ± 10%

  Supply Voltage: 115/230V +10/-15%

  Test Voltage: 250 V - 6,000 V ± 10%

  Voltage-2: Voltage (o.c.) at HV output 250 V - 3,000 V ± 10% Voltage (o.c) at line output 250 V - 2,500 V ± 10%

  View Product Cart

• 

  EM Test CWS 500N1 Continuous Wave Simulator for IEC 61000-4-6

  SKU: sku-410

  Weight: 17 kg (37.5 Pounds)

  Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applications

  Dimensions: 19"/3 HU

  Frequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHz

  Impedance: 50 Ohms

  Input: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)

  Maximum Continuous Power: 80W (nominal)

  Standards Met: IEC 61000-4-6

  Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, Service

  Voltage Rating: 1 V to 30 Volts Max

  View Product View Product

• 

  EM Test (Lüthi) CNV 504N Series CDN For Unshielded Unsymmetrical Interconnection Lines

  SKU: sku-407

  Standards Met: IEC 61000-4-5, IEC 61000-4-12

  MSRP:

  Was:

  Price Now:

  $299.00

  Ordering Options

• 

  EM Test TSS 500N10 Telecom Surge Generator ITU-T for Enhanced Level Testing up to 10 kV

  SKU: sku-403

  Weight: approx. 37.1 kg (81.8 lbs.)

  AC Power Adapter: Supply voltage 115/230 V +10/-15%

  Dimensions: 19"/9 HU, 420 mm x 448 mm x 500 mm

  Energy Storage Capacitor: 1 uF (Pulse 1.2/50 us) 20 uF (Pulse 10/700 μs) 20 uF (Surge Pulse B)

  Front Time: 1 us ± 30% (Pulse 1.2/50 us) 10 us ± 30% (Pulse 10/700 μs) 9 us ± 30% (Surge Pulse B)

  Pulse Duration: 50 us ± 20% (Pulse 1.2/50 us) 700 us ± 20% (Pulse 10/700 us) 720 us ± 20% (Surge Pulse B)

  Standards Met: IEC 61000-4-5 ITU-T K.17 ITU-T K.20 ITU-T K.21 ITU-T K.28 ITU-T K.45 (and more)

  Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

  Test Voltage: 500 V - 10,000 V ± 10%

  View Product Cart

• 

  EM Test TSS 500N4 Telecom Surge Generator as per ITU / FCC up to 4 kV

  SKU: sku-402

  Weight: approx. 20 kg (44 lbs.)

  AC Power Adapter: Supply voltage 115/230 V +10/-15%

  Dimensions: 19"/3HU

  Standards Met: IEC 61000-4-5 ITU-T K.17 ITU-T K.20 ITU-T K.28 ITU-T K.45 (and more)

  Voltage Rating: 160 V - 4,000 V ±10%

  View Product Cart