Grounding Strap for ESD Guns - The EMC Shop

Grounding Strap for ESD Guns

Condition:
New
Length:
2 meters
Applications:
ESD Guns, Ground Reference Plane
Other Applications:
Vertical Coupling Plane
Other Applications:
EMC Test Table
Test Standards:
IEC 61000-4-2
Manufacturer:
The EMC Shop
$270.00

 

SKU:
30125
Availability:

Typically In Stock

Getting Started...

Overview

To be used with ESD Guns, connect to the DUT, ground reference plane, verticle coupling plane, or test table. 

The EMC Shop offers ESD Simulation Guns for IEC 61000-4-2, ISO 10605 and other standards to simulate electrostatic discharge phenomena. Pre-certify, troubleshoot or perform any other verification of your product having an ESD gun readily available. With a wide range of simulators up to 30kV, as well as Discharge Networks to meet military and automotive standards - learn, acquire and receive the best support with this common EMC test.

Videos

Key Considerations

Manufacturer:
The EMC Shop
Length:
2 meters
Applications:
ESD Guns, Ground Reference Plane
Other Applications:
Vertical Coupling Plane
Other Applications:
EMC Test Table
Test Standards:
IEC 61000-4-2

Related EMC Equipment & Solutions

3ctest EDS MAX20 Electrostatic Discharge Simulator

3ctest EDS MAX20 ESD Simulator Gun

SKU: 141241

Test Standards: IEC/EN 61000-4-2, IEC/EN 61000-6-1, IEC/EN 61000-6-2, IEC/EN 61326, IEC 61340-3-1, ISO 14304, ITU-T K.20, Bellcore GR-1089-Core
Test Voltage: 0.5 k V - 20 k V (± 5%)
Frequency: Single, 0.1 Hz, 0.2 Hz, 0.5 Hz, 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz
Battery Charge time: Approx. 5 h
Pre-programmed Test Routines: According to IEC 61000-4-2
Applications: EMC Precompliance Testing, Electrostatic Discharge Immunity
$475.00
Typically In Stock
Ordering Options
ECO2G Oscilloscope

ECO2G 2 GHz EMC Calibration Oscilloscope ESD Gun Verification

SKU: 5501

Sample Rate: 5 GSa/s (10 GSa/s ESR) ADC per analog channel
Record Length: up to 500 Mpts
Waveform Capture Rate: Up to 750,000 wfm/s (Sequence mode)
Pre-Programmed Settings: IEC 61000-4-2 150pF/330 Ohm, All four R/C Combinations of ISO 10605
Vertical Scales: 0.5 mV/div to 10 V/div
Interfaces: USB Hosts, USB Device (USBTMC), LAN（VXI-11/Telnet/Socket, micro SD card, Pass/Fail, Trigger Out, HDMI
Protocol Capabilities: Serial bus triggering and decoder - I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, and Manchester
$395.00
IN STOCK
Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form