AC Power Adapter for ESD16 and ESD30 ESD Guns - The EMC Shop

AC Power Adapter for ESD16 and ESD30 ESD Guns

Condition:
New
Compatible with:
The EMC Shop ESD16 and ESD30 Electrostatic Discharge Guns
Manufacturer:
The EMC Shop
$345.00

 

SKU:
30115
Availability:

Typically In Stock

Getting Started...

Overview

The EMC Shop offers ESD Simulation Guns for IEC 61000-4-2, ISO 10605 and other standards to simulate electrostatic discharge phenomena. Pre-certify, troubleshoot or perform any other verification of your product having an ESD gun readily available. With a wide range of simulators up to 30kV, as well as Discharge Networks to meet military and automotive standards - learn, acquire and receive the best support with this common EMC test.

This AC Power Adapter is compatible with the ESD16 and ESD30 ESD Guns.

Related EMC Equipment & Solutions

3ctest EDS MAX20 Electrostatic Discharge Simulator

3ctest EDS MAX20 ESD Simulator Gun

SKU: 141241

Test Standards: IEC/EN 61000-4-2, IEC/EN 61000-6-1, IEC/EN 61000-6-2, IEC/EN 61326, IEC 61340-3-1, ISO 14304, ITU-T K.20, Bellcore GR-1089-Core
Test Voltage: 0.5 k V - 20 k V (± 5%)
Frequency: Single, 0.1 Hz, 0.2 Hz, 0.5 Hz, 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz
Battery Charge time: Approx. 5 h
Pre-programmed Test Routines: According to IEC 61000-4-2
Applications: EMC Precompliance Testing, Electrostatic Discharge Immunity
$475.00
Typically In Stock
Ordering Options
EMC Partner ESD3000 ESD Generator

EMC Partner ESD3000 ESD Generator

SKU: 10723

Weight: 1.7 kg
Battery: at least 8 hour battery life
Voltage Range: .08 up to 30kV depending on module type
Pre-Programmed IEC Levels: Yes
Resolution: 100V steps
Standards Met: Depending on Module: IEC 61000-4-2, ISO 10605, RTCA DO-160, Mil-STD-464, Mil-STD-883, Mil-STD-750D
$895.00
Typically In Stock
Ordering Options
ECO2G Oscilloscope

ECO2G 2 GHz EMC Calibration Oscilloscope ESD Gun Verification

SKU: 5501

Sample Rate: 5 GSa/s (10 GSa/s ESR) ADC per analog channel
Record Length: up to 500 Mpts
Waveform Capture Rate: Up to 750,000 wfm/s (Sequence mode)
Pre-Programmed Settings: IEC 61000-4-2 150pF/330 Ohm, All four R/C Combinations of ISO 10605
Vertical Scales: 0.5 mV/div to 10 V/div
Interfaces: USB Hosts, USB Device (USBTMC), LAN（VXI-11/Telnet/Socket, micro SD card, Pass/Fail, Trigger Out, HDMI
Protocol Capabilities: Serial bus triggering and decoder - I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, and Manchester
$395.00
IN STOCK
Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form