E&I 3100L Broadband Power Amplifier

E&I 3100L Broadband Power Amplifier

Condition:
Used
Frequency range:
150 kHz - 150 MHz
Gain:
50 dB nominal
Class A Linear Output:
100 Watts P1dB
RF Input Voltage:
1 mW
SATURATED RF POWER OUTPUT:
200W Min. from 10MHz - 90MHz; 150W Min. from 1MHz - 100MHz; 125W Min. from 150KHz - 150MHz
Manufacturer:
E&I Amplifiers

 

Availability:

In Stock

SKU:
14343

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

The E&I 3100L is a broadband solid state amplifier covering the frequency spectrum from 150 KHz to 120 MHz. It is rated at 100 watts of RF power with low harmonic and intermodulation distortion. Over 200 watts of saturated power can be produced with increased distortion products. A highly linear Class A design, the 3100L will amplify inputs of AM, FM, SSB, pulse and any complex modulation signals. The amplifier has 50 dB gain, it is unconditionally stable and will not oscillate even with combinations of mismatched source and load impedance. It is protected against failure due to output load mismatch and/or overdrive.

RMS forward and reverse powers are monitored by a front panel meter. An integral power supply permits operation from 115/230 single phase AC power.

Videos

Key Considerations

Manufacturer:
E&I Amplifiers
Frequency range:
150 kHz - 150 MHz
Gain:
50 dB nominal
Class A Linear Output:
100 Watts P1dB
RF Input Voltage:
1 mW
SATURATED RF POWER OUTPUT:
200W Min. from 10MHz - 90MHz; 150W Min. from 1MHz - 100MHz; 125W Min. from 150KHz - 150MHz

Related EMC Equipment & Solutions

Sonoma 330 Broadband RF Amplifier

Sonoma 330 Broadband RF Amplifier

SKU: 6461

Weight: 3.3 lbs
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals.
connectors: BNC or Type N
Dimensions: 3.6 x 4.3 x 7.2 in
Frequency range: 10 kHz - 2.5 GHz
Gain: 20 dB
Insertion loss: 14 dB
Output Impedance: 50 Ohms
Signal power: 11.7 dB
$2,950.00
In Stock
E&I / ENI 2200L Class A Linear RF Power Amplifier

E&I / ENI 2200L Class A Linear RF Power Amplifier

SKU: 0725

AC Input: 104 – 240 Volts 8.4 A @ 120 V4.2 A @ 240 V
Frequency range: 10 KHz to 12 MHz
Gain: 53 dB (nominal)
Gain Flatness: +/- 1.5 dB
Input Power for Rated Pout: 1 mW
Output Impedance: 50Ω / 2:1 maximum
Protection: Input: Unit will withstand input signal of +13 dBm without damage (1.0 V rms) max. and infinite load VSWR.
Rated Power Output: 200 Watts (P1dB)
Applications: Radiated Immunity
$995.00
In Stock
Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form