International (IEC/EN) Categories
International (IEC/EN) Test Equipment
-
-
-
-
3ctest PFS Single Phase Power Fail Simulator
SKU: 21108
EUT max. Voltage: 55V - 300VEUT max. current: 6A - 55ADip Voltage & Variation Levels: 0% through 100%Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: EMC Precompliance Testing, Conducted Immunity4-6 Weeks -
LFCI4-16/19 Test Generator for Common and Differential Mode Disturbances
SKU: 11995
Test Standards: IEC 61000-4-16, IEC 61000-4-19Frequency Range: DC, 0.05Hz - 300 kHz; resolution 0.05 HzSlew Rate: 100 V/µsInternal Power Amplifier: 250 WattsTypically In Stock -
Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6
SKU: sku-921
Weight: 17 kg (37.5 Pounds)Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applicationsDimensions: 19"/3 HUFrequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHzImpedance: 50 Ohms -
Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network
SKU: 10827
Associated Equipment: RF Conducted Immunity Test SystemsApplication/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 16 AmpsDecoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB$195.00 - $495.00Typically In Stock -
Schloder M Type CDN's for Disturbance Signals to Unscreened Supply Lines (mains) AC + DC up to 1000V, 100A
SKU: sku-791
Application/Test Type: unscreened supply lines (mains) AC + DCCurrent Rating: 16A / 32A / 63 A / 100 ADimensions: 160 x 84,5 x 240mm or 200 x 122,5 x 400mm depending on modelFrequency Range: 150 kHz to 230 MHzMains & EUT Connections: banana sockets -
3 Phase EFT/Burst, Surge Combination Wave Test System
SKU: 1785
Application/Test Type: CE Marking, EMC Precompliance TestingBurst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Pulse amplitude: 0.2 – 5.0 kVPulse current (short circuit): 0.1 – 2.5 kA ±10% (8 us ±20% risetime)Rentals Ship Today -
EFT-DLC EFT/Burst Capacitive Coupling Clamp for Data Lines
SKU: 1780
Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)Built in Accordance to: IEC 61000-4-4Coupling Length: 1 m (39.4 in)Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)RF Connector: Fischer HV Connector$195.00 - $2,495.00In Stock -
CE Mark Product Package for IEC/EN 61000-4 Series Compliance
SKU: 12854
Applications: CE Marking, EMC Precompliance Testing, Conducted ImmunityHarmonized Standards: IEC/EN 61000-4-4, IEC 61000-4-5, IEC 61000-4-11Industries: Medical DevicesTest Setup: Conducted Immunity/Susceptibility Test SetupPeak inrush current capability: greater than 500 AmpsIN STOCK -
Fischer Custom Communications F-203I-A-23MM, 10kHz - 1GHz, 100 Watts CW
SKU: sku-726
Weight: approx. 7 kgApplication/Test Type: Injects the disturbance signal through a combination of inductive and capacitive couplingConnector: N-type femaleDimensions: 610 x 75 x 135 mmFrequency Range: 10kHz - 1GHz