The EMC Shop stocks IEC 61000 test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.International (IEC/EN) Categories
International (IEC/EN) Test Equipment, Systems & Solutions
-
Teseq INA 6502 PQF/Dip Transformer for NSG 3060
SKU: 3955
Test Standards: IEC/EN 61000-4-11Compatible Generators: Teseq NSG 3060, Teseq NSG 3040Applications: Conducted Immunity$549.00 - $1,600.00In stock -
AR CI00 Series RF Conducted Immunity Systems
SKU: 10420
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6, CS114, ISO 11452-4, DO-160 CS"Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 60VrmsBCI Test Levels (w/ built-in amplifier): 400mA/114 dBµAFrequency Range (w/ built-in amplifier): 9 kHz - 1 GHz -
Noiseken ESS-B3011 & GT-30R Electrostatic Discharge Simulator System for up to 30kV Testing
SKU: 345
Weight: Generator : Approx. 4.8kg Discharge gun : Approx. 800g ( excluding cable and connector)Standards Met: IEC 61000-4-2, ISO 10605Air Discharge Voltage Range: 0.20kV30.0kV±5%（30.5kVmax）Battery: AC100V to AC240V ±10% 50Hz／60Hz 62VAContact Discharge Voltage Range: 0.20kV30.0kV±5%（30.5kVmax）Polarity: positive/negativePre-Programmed IEC Levels: YesResolution: Air discharge mode : 2.0kV, 4.0kV, 8.0kV and 15.0kV step Contact discharge mode : 2.0kV, 4.0kV, 6.0kV and 8.0kV stepTypically In Stock -
Haefely PEFT 8010 High Voltage EFT/Burst Generator, 7.3kV
SKU: 22006
Application/Test Type: Approval testing, Product development, Post design diagnostics, Industrial, HouseholdBurst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Burst frequency: 1 Hz … 110 kHz (Duration 0.01 - 999 ms)Burst time: 0.1 Hz - 400 Hz; 2.5 ms - 10 s; 1 period - 500 periodsCoupling: Built-in Single Phase AC 264 Volts / 16 Amps 50-60Hz, 10 Amps from 16 - 400 Hz; 125V/10A DC (Modes: L-GND, N-GND, PE-GND, LN-GND, LPEGND, NPE-GND, LNPE-GND)Pulse amplitude: 1.0 to 7.3kV (6.6 kV at CDN Output)Repetition time: Impulses per second: max. 250 for Unom over 4 kV; Impulses per burst: max. 500 for Unom 4 kVStandards Met: IEC/EN 61000-4-4 Ed. 1 + 2, IEC 61326, EN 61000-6-1, IEC 61850-3, EN 61000-6-2Inquire for Availability -
-
EM Test EFT 500N5.8 Burst Generator up to 4.8kV, w/ Built in 3-Phase Coupler, IEC 61000-4-4
SKU: sku-293
Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4 -
EM Test Dito ESD Simulator up to 16.5 kV for IEC/EN 61000-4-2
SKU: 10645
Voltage Range: 500V - 16,500V +/-5%Electrostatic Discharge: Pulse conforms to IEC 61000-4-2 edition 2Holding Time: More than 5 secondsResolution: 100V stepsRise Time: 0.8ns +/- 25%Supply Voltage: More than 70,000 pulses @ 16.5kV; automatic power-off after 10 minutes if not operated LiFePo4 12.8V - 1000mAhTrigger: Automatic + Manual -
3ctest CWS 600T 10/700us Telecom Wave Surge Simulator for IEC 61000-4-5
SKU: sku-330
Weight: Approx 15 kg (33 lbs)Counter: 1-999Dimensions: 19 inch/6uFrequency Range: 50/60Hz±5%Front Time: Voltage: 10us±20%, time to half value: 700us±20%;Mains & EUT Connections: 4mm banana plugOutput Current: Front time: 5us±20%, time to half value: 320us±20%Polarity: Positive, Negative or AlternatePulse Duration: 11s-99s （shortest depends on test voltage）RF Connector: BNC, 5VTTLStandards Met: IEC 61000-4-5 and ITUETSITelecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendationsTest Voltage: 0.2kV–6.0kV,±10%Transfer Impedance: 15ohm, 40ohm （automatic switch)Voltage Rating: AC 110V/220V , ±10%,