IEC 61000 Test Equipment - The EMC Shop

International (IEC/EN)

(Showing 12 of 44)

Rent IEC 61000 Test Equipment The EMC Shop stocks IEC 61000 test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.

Application Support, Pricing, Lead Time & More: Contact Form

International (IEC/EN) Categories

International (IEC/EN) Test Equipment, Systems & Solutions

Radiated Immunity Test System for IEC 61000-4-20 TEM Waveguides

SKU: sku-393

Application/Test Type: IEC 61000-4-20

Frequency Range: 30 to 1000 MHz

Max Radiated Field Strength: Lowest field strength: 1 V/m at 600 mm septum height* Highest field strength: approx. 18 V/m at 600 mm septum height*

Maximum Continuous Power: Lowest forward power: 15 dBm* Highest forward power: 41 dBm*

Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20

View Product Cart
Haefely ECOMPACT4 Precompliant EMC Impulse Generator

SKU: sku-320

Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

Standards Met: IEC/EN 61000-4-4

Applications: EMC Precompliance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Test Setup Support: Conducted Immunity/Susceptibility Test Setup

Max EUT Current (w/ Built in CDN): 16 Amps

Max EUT Voltage (w/ Built in CDN): 60 Volts

Peak inrush current capability: >500 Amps

EFT/Burst Pulse Output Capability: 4.2 kV

Combination/Wave Surge Output Capability: 4.2kV

External Coupling: Data Lines (EFT & Surge), 3PH EUT

Dips, Interrupts & Variations: 0%, 40%, 70%, 80%

Typically In Stock

View Product Cart
Used Schaffner NSG 2025-4 EFT / Burst Generator Built in Three Phase Coupler

SKU: sku-294

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

Burst frequency: 0.1 kHz - 1,000 kHz

Burst time: Rise Time: 5ns ±20% (50 W, 10 - 90%) Pulse Width: 50ns ±30% (50 W and 1 W), 100ns ±50% open circuit

Coupling: Line to reference ground (IEC 1000-4-4), selected lines together to reference ground, all lines to reference ground (common mode)

Mains & EUT Connections: HV Coax (Direct); L, N and PE via Coupler

Phase synchronization: Asynchronous/synchronous 0 - 360° ±2°

Polarity: Positive/Negative

Pulse amplitude: 200 Volts - 4.5 kV (20 Volt Steps)

Repetition time: 100ms to 10s

Test duration: 1 to 150 pulses (15ms burst duration as per IEC 61000-4-4 up to 10 kHz)

View Product Cart
Amplifier Research (AR) ATR80M6G Wide Band, High Gain Log Periodic Antenna

SKU: 2657

Max RF Input Power: 5,000 Watts

Antenna Factor (1 Meter): 14 to 67 db/m (±1.5 dB)

Application/Test Type: Radiated Immunity Testing

Dimensions: 132.1 x 20.32 x 97.8 cm (52 x 8.0 x 38.5 in)

Frequency Range: 80 MHz - 6 GHz

Max Radiated Field Strength: 1,000 V/m

VSWR: 2.0:1 (Max: 3.0:1)

MSRP:

Was:

Price Now:

$1,275.00

Typically In Stock

Ordering Options
Teseq CDN M1-10 Coupling Network 10 KHz to 80 MHz for PE Lines

SKU: sku-222

Weight: 3.3 Lbs (1.5 kg)

Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)

Common Mode Impedance: 10 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 80 MHz: 150 Ω +60 Ω / -45 Ω

Current Rating: Current max. (no saturation): 300 mA; Current max. (1 s for PE line test): 25 A

Dimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)

Frequency Range: 150 kHz to 230 MHz

Insertion Loss: Less than 0.1 dB

RF Connector: BNC 50 Ω

RF Input Voltage: Less than 20 Volts

Standards Met: IEC/EN 61000-4-6

Voltage Division Factor: 10 dB ±1 dB

Voltage Rating: 3 kV DC, 2 sec

MSRP:

Was:

Price Now:

$790.00
AH Systems CPF-630 Current Monitoring Probe Calibration Fixture

SKU: sku-205

Weight: 9 Lb.'s

Application/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibrated

Dimensions: 10" x 7" x 6"

Frequency Range: 20 Hz - 500 MHz

View Product View Product
AH Systems SAS-571 Broadband Double Ridge Horn Antenna

SKU: 4192

Weight: 3.5 lb.'s (1.59 kg)

3dB Beamwidth (E-Field): 48°

3dB Beamwidth (H-Field): 30°

Antenna Factor (1 Meter): 22 to 44 dB/m

Antennas: Double Ridge Guide Horn Antenna

Aperture: 5.5" x 9.6" (13.9cm x 24.4cm)

Application/Test Type: FCC, MIL-STD, VDE and TEMPEST Testing

Connector: N-Type, female

Dimensions: 11" x 5.6" x 9.6" (27.9cm x 14.2cm x 24.4cm)

Frequency Range: 700 MHz - 18 GHz

Gain: 1.4 to 15 dBi

Impedance: 50 Ohms

Max Radiated Field Strength: 200 V/m

Maximum Continuous Power: 300 Watts

Mounting Base: ¼ - 20 Thread, female

VSWR: 1.6:1 (3.5:1 max)

MSRP:

Was:

Price Now:

$3,780.00

Typically In Stock

Ordering Options
EM Test (Lüthi) M1 CDN for Earth Conductor 250V AC / 1,000V DC

SKU: sku-103

Application/Test Type: Coupling/decoupling networks for Conducted immunity, mains AC power supply lines

Current Rating: 16 Amps (Max)

Frequency Range: 150 kHz to 230 MHz

Mains & EUT Connections: 4mm safety lab connector

RF Input Voltage: 30 V (Max)

Standards Met: IEC / EN 61000-4-6

Voltage Rating: 250 V AC / 1,000 V DC

View Product Cart
Com-Power CDN-M125E Coupling Decoupling Network

SKU: sku-20

Weight: 5 lbs. 2.3 kg

Application/Test Type: Single conductor power cable

Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω

Current Rating: 25 Amps AC / 17 Amps DC (Max)

Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)

Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cm

Frequency Range: 150 kHz to 230 MHz

Mains & EUT Connections: 4 mm shrouded banana sockets

RF Connector: 50 Ω BNC (Female)

RF Input Voltage: 40 V (Max)

Standards Met: IEC / EN 61000-4-6

Voltage Division Factor: 9.5 dB +4 / -1

Voltage Rating: 250 V AC / 350 V DC (Line to Ground)

View Product Cart
Rent Haefely PEFT 4010 Electrical Fast Transient EFT/Burst Generator for IEC 61000-4-4

SKU: 10246

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

Coupling: Built-in Single Phase 250 Volts AC / 110 Volts DC and 16 Amps

Pulse amplitude: 0.10 - 4.5 kV

Applications: Electrical Fast Transient Immunity

Test duration: Impulses per burst 1000 max Impulses per second 12000 max

MSRP:

Was:

Price Now:

$550.00

Typically In Stock

Ordering Options
Haefely ONYX 16 ESD Simulator Gun for IEC 61000-4-2

SKU: 0536

Air Discharge Voltage Range: 1 to 16 kV or 1 to 30 kV

Battery: at least 16 hour battery life

Contact Discharge Voltage Range: 1 to 16 kV or 1 to 30 kV

Frequency Capabilities: single/0.1/0.2/0.5/1/2/5/10/20 Hz

Holding Time: More than 5 sec

Polarity: positive & negative

Pre-Programmed IEC Levels: Yes

Resolution: 100V steps

Standards Met: IEC/EN 61000-4-2, ISO 10605

MSRP:

Was:

Price Now:

$295.00

Ships Same Day

Ordering Options
IEC/EN 61000-4-X Test Rack for Conducted Immunity Certification

SKU: 11195

Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

Standards Met: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-12

Applications: Electrical Transient and Noise, Surge Immunity, Power Failures

Test Setup: Conducted Immunity/Susceptibility Test Setup

Max EUT Power: 600 Voltas @ 100 Amps

Peak inrush current capability: 500 A (at 230 V)

EFT/Burst Pulse Output Capability: 4.8 kV

Combination/Wave Surge Output Capability: 4.4 kV (in 1 V steps)

Generic Standards: IEC 61000-6-1, IEC 61000-6-2

Inquire for Availability

View Product Cart

International (IEC/EN)

International (IEC/EN) Categories

International (IEC/EN) Test Equipment, Systems & Solutions

Connect with The EMC Shop