The EMC Shop stocks IEC 61000 test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.International (IEC/EN) Categories
International (IEC/EN) Test Equipment
-
Surge, EFT, PQF, Ring Wave Immunity System for 3 Phase, 100 Amp EUT
SKU: 12169
Standards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11, IEC/EN 61000-4-12 IEC/EN 61000-4-29Applications: Electrical Transient and Noise, Surge Immunity, Power FailuresMax EUT Voltage: 480 VAC and 1,000 VDCMax EUT Current: 100 Amps (Per Phase)Peak inrush current capability: 500 AmpsRENTAL ONLY -
EM Test DPA 503N Flicker & Harmonics Analyzer
SKU: 11286
Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and moreMax Current (per Channel): 32 AmpsApplications: Medical Device EMC TestingMatching Impedance Network: EM Test AIF 503NInquire for Availability -
Ophir XRF718 RF Power Amplifier
SKU: 8864
Max Frequency: 1 GHzMin Frequency: 80 MHzOutput Power: 100 WattsApplications: Radiated Immunity, Automotive, Medical, Military and AerospaceStandards: IEC 61000-4-3, ISO 11451-2, MIL-STD-461, RTCA DO-160$1,750.00 - $24,750.00Typically In Stock -
Ranger Power Master PM3000HF 3-Phase Power Quality Analyzer with Flicker and Harmonics
SKU: 8845
Input Voltage: 0 - 480 VACChannels: 16Applications: Harmonics and FlickerTest Standards: IEC 61000-4-15, IEC 61326, IEC 61010Additional Test Standards: IEC 61000-3-2, IEC 61000-3-3$750.00 - $7,500.00In stock -
AR AS01018 Electromagnetic Field Immunity Test System
SKU: 12177
Generic Standards: IEC 61000-6-1, IEC 61000-6-2Test Standards: IEC 61000-4-3Frequency Range: 80 MHz - 6 GHzField Strength: up to 30 V/mApplications: EMC RF Susceptibility TestingTypically In Stock -
Schwarzbeck TEMH 6000 6 GHz TEM Horn Antenna for IEC 61000-4-39
SKU: 12081
Nominal Frequency Range: 380 MHz - 6 GHzUsable Frequency Range: 300 MHz - 8 GHzPolarization: linearPattern Type: directionalMax Power: 300 Watts$4,975.004-6 Weeks -
Inquire for Availability -
AH Systems SAS-521-4 Bilog Antenna, 25 MHz - 4 GHz
SKU: 11920
Antenna Factor (1 Meter): 7 to 30 dB/mAntennas: Bilogical AntennasApplication/Test Type: RF EMC immunity testing, Radiated Emissions Testing, Improved high frequency gainConnector: N type femaleDimensions: 22.2 in. (56.4 cm) x 38.5 in (97.8 cm) x 39 in (99.1 cm)Inquire for Availability -
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864
SKU: 10546
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864IN STOCK -
Schaffner CDN 8014 Burst/EFT Coupling Clamp for EN/IEC 61000-4-4
SKU: 10545
Compatible Generators: EFT GeneratorsElectrical Noise/Transient ImmunityStandards Met: IEC/EN 61000-4-4$2,990.00Inquire for Availability -
Materials for EFT/Burst Laboratory Test Setup
SKU: 11245
Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)Standards Met: IEC 60601-1-2, IEC 61000-4-2Applications: Test Setup for Burst/EFT, EMC Precompliance Immunity TestingTable Dimensions: .8 meters (H)Table Top Ground Plane: 1.6m x .8mIN STOCK -
Noiseken ESS-S3011A & GT-30RA Electrostatic Discharge Simulator System for up to 30kV Testing
SKU: 8250
Weight: Approx. 7.0kg (gun holder excluded) Approx. 7.5kg (gun holder included)Air Discharge Voltage Range: 0.20kV to 30.0kV±5%（30.5kVmax）10.0kV : 0.01kV step 30.0kV : 0.1kV stepStandards Met: IEC 61000-4-2, ISO 10605Battery: AC100V to AC240V 50Hz／60Hz ±10% 75VAContact Discharge Voltage Range: 0.20kV to 30.0kV±5% （30.5kVmax） 10.0kV : 0.01kV step 30.0kV : 0.1kV stepTypically In Stock