Standards - ANSI/IEEE Standards - Page 1

ANSI/IEEE Standards

(Showing 12 of 54)

The American National Standards Institute (ANSI) is a private non-profit organization that oversees the development of voluntary consensus standards for products, services, processes, systems, and personnel in the United States.

IEEE is an organization composed of engineers, scientists, and students. The IEEE is best known for developing standards for the computer and electronics industry.

ANSI/IEEE Standards Categories

ANSI/IEEE Standards Test Equipment, Systems & Solutions

R&S ESW Series EMI Test Receiver

SKU: 11722

Weight: 45.42 lb

Dimensions: 18.15 in × 9.44 in × 19.81 in

Frequency Range: 2 Hz up to 8, 26.5, or 44 GHz

Standards Met: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC

Typically In Stock

View Product
Rent Radiated Emissions Test System Using GTEM

SKU: 0869

Frequency Range: 30 MHz - 40 GHz

DUT Size: up to 2' cubed (GTEM 750)

EMI Measurements: FCC Part 15, CISPR 11, MIL-STD-461 and more

Applications: EMC Precompliance Testing, CE Marking, Radiated Emissions Testing

Cost New:

Was:

Price Now:

$1,775.00

IN STOCK
Rent Keysight N9048B CISPR 16 EMI Receiver

SKU: 22153

Frequency Range: 1 Hz to 26.5 GHz

Standards Met: CISPR 16-1-1, ANSI C63.2, FCC

Calibration: Accredited ISO 17025

Options: See "Installed Options"

Applications: Conducted Emissions, Radiated Emissions,

Technical Note: Differences Between EMI Test Receivers and Spectrum Analyzers

IN STOCK

View Product
IEEE 299 Shielding Effectiveness Measurement System

SKU: TES-IEEE299-CUSTOM

Frequency Range: 9 kHz - 18 GHz

Antenna Polarization: Automatic or Manual Options

Configurations: Single or Multiple Antennas

Measurement Types: E-Field, H-Fied, Plane Wave, Back and Front

Typically In Stock

View Product
EMC Partner MIG0603 Damped Oscillatory Wave Generator System

SKU: 05707

Frequency: 100 kHz - 1 MHz

Voltage range: 0.2 up to 3 kV

Source impedance: 200 ohms

Damping rate: 50% between 3rd and 6th periods

Pulse rise time: 75 ns

Burst repetition: 100 kHz up to 50 Hz

Burst repetition: 1 MHz up to 500 Hz

Voltage increment: 1 V steps

Test Standards: IEC 61000 4-18, ANSI/IEEE C37.90.1

Applications: Immunity to Electrical Surges

IN STOCK

View Product
PMM ER9000 EMI Test Receiver

SKU: 12366

Frequency Range: 10 Hz - 3 GHz

Compliant?: Yes

Applications: Conducted Emissions, Radiated Emissions

Pre-programmed Test Limits: CISPR 11, CISPR 22, ANSI C63.2

Other Features: Click Analyzer (CISPR 14-1)

App Note: Differences Between EMI Test Receivers and Spectrum Analyzers

Cost New:

Was:

Price Now:

$2,500.00 - $29,500.00

Typically In Stock

Ordering Options
Rohde & Schwarz ESW44 EMI Test Receiver for CISPR16-1-1, 1 Hz to 44 GHz

SKU: 6113

Frequency Range: 2 Hz to 44 GHz

Standards Met: CISPR 16-1-1, ANSI C63.2, FCC

Calibration: Accredited ISO 17025

Options: B4, B21 or B8E, B21, B24

Applications: Differences Between EMI Test Receivers and Spectrum Analyzers

Typically In Stock

View Product
RFT-09 Faraday Tent for Radiated Emissions Testing

SKU: sku-2266

Attenuation: 90 dB typical

Frequency Range: (150 kHz) 30 MHz - 18 GHz

Applications: Radiated Emissions and Radiated Immunity Precompliance

Standard Options: Lights and Vent

Enclosure Size: 9ft x 9ft 6.5ft

Frame Size: 10ft x 10ft x 9.5ft

Door Size: 70in x 40in

Frame Type: Portable and Heavy Duty

Feedthroughs: 120 VAC, N(f), BNC(f), SMA(f), Sleeve

View Product
RF/EMI Shielding Effectiveness Testing

SKU: sku-1900

Weight: 26 lb

Frequency Range: 95 kHz (Crystal Controlled)

Output Signal: Pulse modulated at approximately 600 Hz and has a 50% duty cycle

Receiver: Two meter scales for high and low operation Aural output for headphone operation Battery operated for portable use Dynamic range of 120dB

Transmitter Output: 1 Ampere RMS into an inductive load from approximately 5–50 μHy

View Product
Com-Power LI-150C Line Impedance Stabilization Network

SKU: sku-890

Weight: 25 lbs. / 11.3 kg

Application/Test Type: Power line conducted emissions tests

Current Rating: 50 Amps (AC), 35 Amps (DC)

Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm

Frequency Range: 150 kHz to 30 MHz

Inductors: 5 µH (air-core)

Insertion Loss: 0.5 dB (150 kHz to 30 MHz)

Isolation: 40 dB (150 kHz to 30 MHz)

Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets

RF Connector: 50Ω N-type (female)

Standards Met: CISPR 16-1-2 / ANSI C63.4

Voltage Rating: 270 VAC (Line to Ground), 380 VDC

View Product
Com-Power LI-125C 150 kHz to 30 MHz Line Impedance Stabilization Network Pair

SKU: sku-881

Weight: 25 lbs. / 11.3 kg

Application/Test Type: Power line conducted emissions tests

Current Rating: 25 Amps (AC), 17 Amps (DC)

Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm

Frequency Range: 150 kHz to 30 MHz

Inductors: 50 µH (air-core)

Insertion Loss: 0.5 dB (150 kHz to 30 MHz)

Isolation: 40 dB (150 kHz to 30 MHz)

Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets

RF Connector: 50Ω N-type (female)

Standards Met: CISPR 16-1-2 / ANSI C63.4

Voltage Rating: 270 VAC (Line to Ground), 380 VDC

View Product
Com-Power LI-3P-216 LISN, 9 kHz to 30 MHz, 50/250 uH, 500 VAC

SKU: 11665

Weight: 27.5 lbs.

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: 16 Amperes

Dimensions: 19.3” x 13.9” x 2.3"

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

Cost New:

Was:

Price Now:

$5,795.00

SHIPS IN 3-5 DAYS

Ordering Options

ANSI/IEEE Standards

ANSI/IEEE Standards Categories

ANSI/IEEE Standards Test Equipment, Systems & Solutions

Connect with The EMC Shop