CISPR 16

(Showing 12 of 48)

The CISPR sections specify the criteria and performance of the measurement equipment used when taking conducted and radiated disturbance measurements. Most product standards refer back to CISPR, which specifies requirements between 9 kHz and 18 GHz, although testing can often exceed this on either direction.

The EMC Shop stocks measurement equipment for RF and radio disturbances according to CISPR 16 and other test standards. Order online now, rentals ship same day.

CISPR 16 SECTIONS

CISPR 16 EQUIPMENT BY CATEGORY

Rent, buy or lease EMI test receivers for emissions measurements

CISPR 16 MEASUREMENT RECEIVERS

Rent LISN's for CISPR 25, CISPR 16, MIL-ST 461 and More

CISPR 16 LISN'S

Order EMC couplers and clamps online - rentals ship dame day

CISPR 16 EM CLAMPS

Order EMC antennas online - rentals ship same day

CISPR 16 ANTENNAS

Show 12 24 36 48

CISPR 16 Categories

CISPR 16 Test Equipment, Systems & Solutions

Teseq CDN M532 5-Line/32 Amp RF Coupling/Decoupling Network

SKU: 12093

Associated Equipment: RF Conducted Immunity Test Systems

Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

Current Rating: 32 Amps Maximum

Decoupling of Common Mode Disturbance: Greater than 30 dB

Dimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)

Insertion Loss: Greater than 0.1 dB

Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)

RF Connector: BNC, 50 Ω

RF Input Voltage: Less than 30 V

Standards Met: IEC 61000-4-6

Voltage Division Factor: 10 dB +3 dB / -1 dB

EMC Test Standard: IEC/EN 61000-4-6

VIEW PRODUCT
BA1G EMI Bicone Antenna 30 MHz - 1 GHz - CISPR 16-1-4

SKU: 21143

Weight: 1.6 lb.'s (725 g)

Test Standards: CISPR 11, CISPR 16-1-4, CISPR 16-2-3, FCC 18 and others

Application/Test Type: Radiated Emissions Measurements, Military & Aviation EMC Testing

Connector: N-type (female)

Dimensions: Height: 15 in. (38.1 cm) Width: 14 1/4 in. (36.25 cm) Depth: 7 11/16 in. (19.5 cm)

Frequency Range: 30 MHz - 1GHz

Gain: -50 to 2.5 dBi

Impedance: 50 Ohms nominal

Maximum Continuous Power: 200 Watt

Mounting Base: ABC-B Mounting Clamp with ¼ - 20 Thread, female

Typically In Stock

VIEW PRODUCT Cart
Com-Power LI-3P-216 LISN, 9 kHz to 30 MHz, 50/250 uH, 500 VAC

SKU: 11665

Weight: 27.5 lbs.

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: 16 Amperes

Dimensions: 19.3” x 13.9” x 2.3"

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

Cost New:

Was:

Price Now:

$5,795.00

SHIPS IN 3-5 DAYS

ORDERING OPTIONS
Com-Power LI-3P-1100 150 kHz - 30 MHz Three-Phase Line Impedance Stabilization Network

SKU: sku-600

Weight: 71.5 lbs

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: 100 Amperes

Frequency Range: 150 kHz to 30 MHz

Inductors: 50 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

VIEW PRODUCT Cart
Com-Power LI-3P-163 150kHz - 30MHz Three-Phase Line Impedance Stabilization Network

SKU: sku-599

Weight: 52.5 lbs.

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: 63 Amperes

Frequency Range: 150 kHz to 30 MHz

Inductors: 50 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

VIEW PRODUCT Cart
Com-Power LI-3P-116 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network

SKU: sku-597

Weight: 27.5 lbs.

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: 16 Amperes

Frequency Range: 150 kHz to 30 MHz

Inductors: 50 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

CISPR 16-1-2: Yes

DO-160F: Yes

CISPR 22: Yes

FCC: Yes

ANSI C63.4: Yes

Cost New:

Was:

Price Now:

$395.00 - $5,350.00

ORDERING OPTIONS
Rent Solar 9247-50-TS-50-N LISN for CISPR 16-1, FCC Part 15, ANSI C63.4

SKU: sku-302

Application/Test Type: Power line conducted emissions tests

Current Rating: 50 Amps

Frequency Range: 10 kHz to 50 MHz

Inductors: 50 µH (0.10 µF Coupling Capacitor)

Mains & EUT Connections: Terminal Screw

RF Connector: 50Ω N-type (female)

Standards Met: FCC Part 15, CISPR 16-1, ANSI C63.4 (1992)

Voltage Rating: 500 VAC (Line to Ground), 800 VDC

VIEW PRODUCT Cart
Keysight (Agilent) N9038A-526 MXE EMI Receiver, 3 Hz to 26.5 GHz

SKU: 10259

Frequency Range: 20 Hz - 26.5 GHz

Resolution: 2 Hz

Bandwidth accuracy (–3.01 dB): 1 Hz to 1.3 MHz ± 2 % (nominal)

Dynamic Range: > 70 dB

Amplitude Accuracy: < ± 2.7 dB

EMC Standards: CISPR 11, CISPR 22, ANSI C63.2

Applications: Differences Between EMI Test Receivers and Spectrum Analyzers

Typically In Stock

VIEW PRODUCT Cart
Teseq CDN M5 5-Line Coupling Network for AC Power Lines, 16-32 Amps

SKU: sku-227

Weight: 6.5 kg (14.3 LB.'s)

Application/Test Type: 5 mains AC power lines emissions testing up to 32 Amps (3L+N+PE)

Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

Current Rating: 32 Amps Maximum

Decoupling of Common Mode Disturbance: Greater than 30 dB

Dimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)

Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)

Insertion Loss: Greater than 0.1 dB

Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)

RF Connector: BNC, 50 Ω

RF Input Voltage: Less than 30 V

Standards Met: IEC 61000-4-6

Voltage Division Factor: 10 dB +3 dB / -1 dB

Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec

VIEW PRODUCT
Teseq CDN M432 32 Amp Coupling/Dcoupling Network

SKU: sku-226

Weight: 6.5 kg (14.3 LB.'s)

Application/Test Type: 4 mains AC power lines emissions testing up to 32 Amps (2L+N+PE), (3L+PE), optional (3L+N)

Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

Current Rating: 32 Amps Maximum

Decoupling of Common Mode Disturbance: Greater than 30 dB

Dimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)

Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)

Insertion Loss: Greater than 0.1 dB

Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)

RF Connector: BNC, 50 Ω

RF Input Voltage: Less than 30 V

Standards Met: IEC 61000-4-6

Voltage Division Factor: 10 dB +3 dB / -1 dB

Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec

Cost New:

Was:

Price Now:

$270.00

ORDERING OPTIONS
Teseq CDN M416 4-Line Coupling/Decoupling Network

SKU: sku-225

Weight: 700 grams (1.5 LB.'s)

Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)

Common Mode Impedance: 150 Ω +10/-20 Ω

Current Rating: 10 Amps Maximum

Decoupling of Common Mode Disturbance: Greater than 30 dB

Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)

Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)

Insertion Loss: Greater than 0.1 dB

Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)

RF Connector: BNC, 50 Ω

RF Input Voltage: Less than 30 V

Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

Voltage Division Factor: 20 dB ±1.5 dB

Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec

VIEW PRODUCT
Teseq CDN M316 Coupling/Decoupling Network (CDN) CDN M3 Type

SKU: sku-224

Weight: 700 grams (1.5 LB.'s)

Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)

Common Mode Impedance: 150 Ω +10/-20 Ω

Current Rating: 10 Amps Maximum

Decoupling of Common Mode Disturbance: Greater than 30 dB

Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)

Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)

Insertion Loss: Greater than 0.1 dB

Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)

RF Connector: BNC, 50 Ω

RF Input Voltage: Less than 30 V

Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

Voltage Division Factor: 20 dB ±1.5 dB

Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec

VIEW PRODUCT Cart