Overview
EMC Partner MIG-OS-OS1 Application:
The MIG-OS-OS1 includes damped oscillatory tester 1MHz and 100 kHz up to 3 kV in accordance with IEC 61000-4-18. This standard defines a dual output for differential mode tests. The two BNC monitor outputs allow monitoring the voltage wave shape by an oscilloscope.
Oscillatory Wave Generator according to IEC 61000-4-18 (slow wave), IEC 60255-22-1, ANSI C37.90.1. Requires CDN2000-06-25 or CDN-1P-16 OSI.Standards Met:
- IEC 61000-4-18
- ANSI C37.90
- IEC 60255-22-1
EMC Partner MIG-OS-OS1 Benefits:
- Reproducible test results between locations
- IEC and ANSI impulses
- Differential output
EMC Partner DOW Test Systems Accessories:
| CDN-1P-04-16 OSI | Manual single phase CDN with line voltages L to N=280V line current 16A. Coupling path selection, CM, L+N to PE for slow damped oscillatory waves 100kHz and 1MHz, 200 Ohm fast damped oscillatory waves only, 3, 10, 30MHz, 50 Ohm |
| CDN2000-06-25 480V | Manual three phase CDN with line voltages L to N=280V and L to L=480V, line current 25A per phase. Coupling path selection EFT(5kV), DOW 100kHz and 1MHz (4kV), Surge and Ring up to 6kV. d.c. see user manual ! L-L=max. 600V, L-GND=max. 300V |
| CDN3000A-06-32 480V | Three phase CDN with line voltages L to N=280V and L to L=480V, line current 32A per phase. Automatic coupling path selection for EFT, Surge, RING and Damped Oscillatory, Common mode coupling only up to max. 30MHz. |
| CDN3000A-06-32 690V | Three phase CDN with line voltages L to N=400V and L to L=690V, line current 32A per phase. Automatic coupling path selection for EFT, Surge, RING and Damped Oscillatory. Common mode coupling only up to max. 30MHz. |
