Categories
Test Equipment
-
Schwarzbeck NNBL 8226 MIL-STD-461 LISN
SKU: 6862
Frequency Range: 9 kHz - 100 MHzMax. cont. current: 70 AMax. current (limited time): 100 AMax Voltage (DC): 500 VMax. Voltage (AC 50/60 Hz): 250 V$2,775.00Typically in Stock -
Amplifier Research 15S1G3 RF Power Amplifier
SKU: 6327
RF Power Amplifier: 800 MHz to 3 GHzRated Power Output: 15 Watts MinimumInput for Rated Output: 1.0 Milliwatt MaximumGAIN (at maximum setting): 42 dB minimumInput Impedance: 50 ohms1 LEFT -
Amplifier Research 100A400AM20 4 kHz - 400 MHz, 100 Watt RF Amplifier for BCI Testing
SKU: 12087
Weight: With Cabinet 18.5 kg (41 lbs) Without Cabinet 10.4 kg (23 lbs)Dimensions: With cabinet: 50.3 x 15.5 x 55.1 cm (19.8 x 6.1 x 21.7 in) Without Cabinet: 48.3 x 13.2 x 55.1 cm (19 x 5.2 x 21.7 in)Flatness: FLATNESS: ±1.0 dB typical, ±1.5 dB maximumFrequency Range: 4kHz–400MHzGain: GAIN (at maximum setting): 50 dB minimum GAIN ADJUSTMENT (Continuous Range) : 20 dB minimum -
Maturo KE 2.5-R Tilt Device
SKU: KE 2.5-R
Height of rotation axis: 325 mm (above base plate)Load capability: 2.5 kgDimensions tilting plate (L x W): 500 x 300 mmDimensions tilting device (L x W x H): 800 x 400 x 375 mmPolarization: 0°/90° (vert./hor.)Inquire for Availability -
IEC/EN 61000-4-X Test Rack for Conducted Immunity Certification
SKU: 11195
Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-12Applications: Electrical Transient and Noise, Surge Immunity, Power FailuresTest Setup: Conducted Immunity/Susceptibility Test SetupMax EUT Power: 600 Voltas @ 100 AmpsInquire for Availability -
3ctest EDS 30V Automotive ESD Simulator for ISO 10605
SKU: 6206
Test Standards: ISO 10605 Edition 3, IEC 61000-4-2Additional Test Standards: MIL-STD-461 CS118, RTCA DO-160, IEC 60601-1-2ESD Voltage Output Range (Air/Contact): 30 kVInterchangeable R/C Modules: YesBattery Life: 8 Hours$495.00 - $985.00IN STOCK -
Amplifier Research 125S1G6 0.7 - 6 GHz Microwave Amplifier 125W
SKU: sku-1068
Max Frequency: 6 GHzMin Frequency: 800 MHzOutput Power: 125 WattsApplications: Radiated Immunity, Automotive, MedicalStandards: IEC 61000-4-3 -
Narda NBM HF 0191 H-Field probe, 27MHz - 1GHz
SKU: 6213
Frequency Range: 27 MHz to 1 GHzApplications: Magnetic Field Measurements, Radiated Emissions TestingTest Standards: IEC 61000-4-8, IEC 61000-4-9, IEC 61000-4-10Measurement Range: 0.018 to 16 A/m (CW), 0.018 to 1 A/m (True RMS)Dynamic Range: 59 dBTypically In Stock -
EMC Partner ESD3000 ESD Generator
SKU: 10723
Weight: 1.7 kgBattery: at least 8 hour battery lifeVoltage Range: .08 up to 30kV depending on module typePre-Programmed IEC Levels: YesResolution: 100V steps$795.00 - $2,195.00Typically In Stock -
Rohde & Schwarz ESRP7 EMI Test Receiver per CISPR 16-1-1
SKU: 22721
Frequency Range: 9 kHz to 7 GHzSSB Phase Noise: –90 dBc (1 Hz) (typ.)Frequency Response: 100 kHz ≤ f ≤ 7 GHz, < 3 dBDynamic Range: 110 dBRF Output Connector: N Type Female, 50 ΩCALL FOR LEAD TIME -
Amplifier Research PM2002 RF Power Meter
SKU: 1046
Interfaces: Inputs: Rear panel HEAD connectors and rear panel IEEE-488 connector standard. Outputs: Rear panel PWR/REF connector, 0dBm, 50 MHz. Rear panel RECORDER BNC connector, 0 to 10V into 1mW.Frequency Range: 10 kHz to 40 GHz, power head dependentChannels: 2Power Measurement Range: -70dBm to +44dBm, power head dependent$250.00 - $2,750.00IN STOCK -
Rent Fischer F-52 Current Monitor Probe 10kHz – 500MHz
SKU: 30067
Top Frequency Range: 500 MHzBottom Frequency Range: 10 kHzAC Current Handling (DC-400Hz): 350 AmpsRF Current Handling (CW/Pulse): 50/100 AmpsApplications: RF Current Monitoring, EMC BCI Tests, Military EMC TestingShips within 24 hours.