Categories
Test Equipment, Systems & Solutions
-
Haefely DIP 116 Automatic Dips Transformer 16 Amps 40/70/80%
SKU: HAE-DIP116
Test Standards: IEC 61000-4-11Typically In Stock -
A.R. TC1000A Test Cell/RF Shielding Box
SKU: 11989
Max DUT Size: 30 cm CubedFrequency Range: 1 MHz - 1 GHzField Strength: 10 V/m with 80% AM per IEC 61000-4-3 (200 V/m possible)$7,500.001 LEFT -
3cTest SEPN 4532Ta CDN for EFT/Burst, Surge, and Ring Wave Immunity Testing
SKU: 30186
Applications: Power LinesTest Standards: EN/IEC 61000-4-12, IEC 61000-4-4, IEC 61000-4-5Input Voltage: AC 100V to 240 V, 50/60 HzCoupling Voltage: 6 kV max.Coupling Current: 3 kA max.Output Impedance: 2 Ω, 12 Ω, 2 Ω/ 12 ΩInquire for Lead Time -
ETS-Lindgren AMS-8050 Antenna Measurement System
SKU: 30156
Frequency Range: 700 MHz to 10 GHzVoltage: 50/60 HzConnector: IEC 320Multi-Axis Positioner: Accuracy 0.5 degrees, Resolution 0.1 degreesPath Length: 1.5 mDrive System Electrical (VAC): 208/240 VAC; NEMA 6-15Drive System (Amps): 10 AEquipment/DUT Electrical (VAC): 115/230 VAC; NEMA 5-15Equipment/DUT (Amps): 5 AShield Performance: >90 dBApplications: OTA Testing, EMC Precompliance TestingInquire for Lead Time -
Fischer FCC-LISN-50-200-1 Line Impedance Stabilization Network
SKU: 8963
Frequency Range: 10 kHz - 30 MHzInductance: 50 µHMax. Current: 200 AmpsMax. Voltage: 480 Vrms, DC/60 HzMax. Voltage: 130 Vrms, 400 HzApplications: Conducted Emissions, Military EMC TestingTest Standards: MIL-STD-461$500.002 Units Available -
Narda EFD-0691 E-Field Probe 100 kHz to 6 GHz
SKU: 8643
Frequency Range: 100 kHz to 6 GHzProbe Type: Electric E-FieldMeasurement Range: 0.2 to 650 V/m (CW), 0.2 to 17 V/m (True RMS)Dynamic Range: 70 dBDirectivity: Isotropic (Tri-axial)Applications: Radiated Emissions TestingStandards: EN 50492 and IEC 62232In Stock -
Anritsu S810D SiteMaster Cable and Antenna Analyzer
SKU: 8865
Frequency Range: 0.025 GHz to 10.5 GHzOutput Power: <0 dBm (at any frequency)Measurement Accuracy: ≥42 dB corrected directivity after calibration for <5 GHz, ≥36 dB corrected directivity after calibration for <15 GHz, ≥32 dB corrected directivity after calibration for >15 GHzApplications: VSWR, return loss, cable loss, and distance-to-fault (DTF) analysis$390.00In Stock -
Schwarzbeck CDN M4PE 32A Coupling Decoupling Network
SKU: 6657
Frequency Range: 150 kHz to 230 MHzCommon Mode Impedance: 150 kHz – 24 MHz: 150 Ω ±20 Ω, 24 MHz–80 MHz: 150 Ω +60 Ω/-45 Ω, 80 MHz–230 MHz: 150 Ω ±60 ΩMax. RF Test Voltage: 30 VRF Input Power: 6 WInput voltage EuT (AE): Line to ground / line to line: 500 VAC / 1000 VDC, 1000 VAC / 2000 VDCEUT, AE Connectors: 4 mm safety banana (f)Applications: RF Conducted Immunity TestingTest Standards: IEC 61000-4-6$295.00Typically In Stock -
Free Used Polyurethane Absorber from EMC Chamber
SKU: 61121
Frequency Range: 30 MHz - 100 GHzPower Handling: 1.5 kW/m²Reflection Loss (Typical): 35-45 dBApplications: EMC, RF and mmWave Testing, OTA, 5G, IoT, Antenna MeasurementFire Retardant: YesTest Standards: IEC 61000-4-3, MIL-STD 461, CISPR 16Typically In Stock -
Schwarzbeck CMDM 8700 B Common Mode / Differential Mode Switch
SKU: 8564
Frequency Range: 9 kHz – 108 MHzConnector: BNCImpedance of Line A, Line B and output port: 50 ΩVoltage division factor at the measuring port: -20 dB +/-3 dBApplications: Radiated Emissions$2,775.00Typically in Stock -
Elektro-Automatik EA-PSE 9500-60 3U Programmable DC Power Supply
SKU: 8870
Max. Voltage Handling: 500 VMax. Current Handling: 10 kWPower: 10,000 WApplications: Conducted ImmunityStandards: IEC 61326, IEC 1010, EN 61010$345.00In Stock -
VCP-FS Vertical Coupling Plane with Voltage Bleeding Cable
SKU: 4378
Standards Met: IEC 61000-4-2Applications: Conducted Immunity, Electrostatic Discharge Immunity TestVCP Aluminum Size: 50 x 50 cm / 19.7 x 19.7 inVoltage Bleeding Cable: Includes two 470kΩ resistorsHeight: 1.5m/4.9 ft or 2.25m/7.3 ftIn Stock