Categories
Test Equipment, Systems & Solutions
-
Teseq ISN PLT Impedance Stabilization Network (ISN) for Power Line Telecommunication (PLT)
SKU: sku-176
Weight: approx. 1450 gDimensions: (W x H x D) in mm: 185 x 100 x 100Frequency Range: 1.6 MHz to 30 MHzImpedance: 25 Ω ±3 ΩIsolation: 55 dB -
Electrical Fast Transient (EFT) Burst Immunity Component Level Test Setup
SKU: 30044
Bandwidth: DC to 500 kHzSampling Rate: 3 MspsResolution: 12 bitApplications: Burst/EFT Testing, EMC Precompliance TestingTest Standards: 61000-4-4In Stock -
Haefely PSURGE 10/700us Telecom Impulse Test System
SKU: sku-248
Polarity: Positive and NegativeTelecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendationsTest Voltage: 0.20 – 7.4kV ±10%In Stock -
Schwarzbeck NSLK 8128 Line Impedance Stabilization Network
SKU: 12230
Frequency Ranges: 9 kHz - 30 MHzMax. Voltage: 250 V AC (50 Hz/ 60 Hz); 400 V DCPre-Filter Choke: 250 µHTest Standards: CISPR 16-1-2Inquire for Availability -
APREL Helmholtz Coil
SKU: 30147
Field Level: 100 x current through the coilsCoil Radius: 142mm, 118 mm, 93 mmWire: AWG24 enameled magnet wireNumber of Turns (per coil): 20Applications: Radiated ImmunityTest Standards: EN/IEC 61000-4-8Inquire for Lead Time -
Teseq NSG 3150 Combination Wave Surge Generator for IEC/EN 61000-4-5 up to 15 kV
SKU: 10795
Weight: Approx. 40 kg (88 lbs)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Coupling: IEC/externalDimensions: 449 (17.7”) x 328 (12.9”; 7 HU) x 565 mm (22.2”)Display Interface: 7“ touch-screenImpedance: 2/12 ΩPhase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)Polarity: pos / neg / alternatePulse current (short circuit): ±250 A to 7.5 kAPulse repetition: 20* .... 600 s (in 1 sec steps) 1 .... 10 min.Pulse voltage (open circuit): ±500 V to 15 kV (in 1 V steps)Supply Voltage: 85 to 265 VAC, 50/60 HzTest duration: 1 to 9999 pulses, continuousEquipment Group: Combination Wave GeneratorsTest Setup Overview: Surge Immunity Test, Setup, Equipment -
Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts
SKU: sku-219
Application/Test Type: Automated Surge Immunity TestingCurrent Rating: 3 x 100 Amp continuous (peak 3 x 150 Amp for 30 min.)Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45, IEC / EN 61000-4-12:2006 and ANSI C62.41Voltage Rating: 480 VAC rms Line to LineInquire for Availability -
Teseq INA 6502 PQF/Dip Transformer for NSG 3060
SKU: 3955
Test Standards: IEC/EN 61000-4-11Compatible Generators: Teseq NSG 3060, Teseq NSG 3040Applications: Conducted Immunity$549.00 - $1,600.00In stock -
Schwarzbeck VULP 9118 H Log Periodic Antenna
SKU: 1829
Frequency Range: 30 MHz - 1.3 GHzIsotropic Gain: 6.2 dBi + / - 1.2 dBAntenna Factor: -6 - 31 dB/mMax. Input Power: 2000 W (30 MHz), 300 W (1 GHz)Cross Polarisation: >20 dB (30 MHz...1 GHz)Inquire for Availability -
Amplifier Research AT3000 E Field Generator
SKU: sku-1731
Applications: Radiated SusceptibilityBuilt in Load: NoFrequency Range: 10 kHz - 30 MHzMax Radiated Field Strength: 135 V/m -
Schwarzbeck BBHA 9120 E Double Ridged Broadband Horn Antenna
SKU: 30148
Nominal Frequency Range: 0.5 GHz to 6 GHzUsable Frequency Range: 0.5 GHz to 8 GHzPolarization: LinearPattern Type: DirectionalIsotropic Gain: 6 to 18 dBiAntenna Factor: 19 to 29 dB/mInquire for Lead Time -
Amplifier Research MT06002 Multi-Tone RF Radiated & Conducted Immunity System
SKU: 11384
Applications: EMC RF/Radiated Susceptibility TestingFrequency Range: 10 kHz to 6 GHzAverage Output Power: 10 dBmMax. Reverse Power: 24 dBmModulation: AM, FM, Pulse, PhaseTest Standards: See in overviewInquire for Availability