Categories
Test Equipment, Systems & Solutions
-
Radiated Emissions Testing Equipment for FCC, MIL and More
SKU: sku-1164
Generic Standards: IEC 61000-6-3, IEC 61000-6-4 -
Schwarzbeck NNBL 8240 Line Impedance Stabilisation Network
SKU: 30015
Test Standards: MIL-STD-461EApplications: Conducted Emissions, BCI Testing , Automotive EV EMCAdditional Applications: MilitaryFrequency Range: (9) 150 kHz – 100 MHzMax. Continuous Current: 800 AMax. Current (limited time): 1000 AMax. Voltage DC: 1000 VMax. Voltage 50/60 Hz: 650 VImpedance: (50 µH + 5 Ω) || 50 Ω ±20 %Resistance of Coil: < 3 mΩInquire for Availability -
Rohde & Schwarz Precompliance EMI Emissions Test Equipment Package
SKU: sku-1125
Applications: EMC Precompliance Testing, Conducted Emissions, Radiated EmissionsLimit Lines: CISPR 11, MIL-STD-461, FCC Part 15 and moreIn stock -
-
-
EM Test CNV 504 Coupling/Decoupling Network
SKU: 30017
Test Standards: IEC 61000-4-5Applications: Data lines Unshielded, Symmetrical Surge ImmunityInquire for Availability -
Typically In Stock -
IFI EFG-3 E-Field Generating Antenna 1000 Watts
Test Standards: MIL-STD-461 RS103, DO-160Built in Load: NoFrequency Range: 10 kHz - 220 MHzInput Impedance: 50 ohms nominalApplications: Radiated SusceptibilityOutput Port Impedance: 50 ohms nominalPower Handling Capability: 1000 Watts CWCALL FOR LEAD TIME -
Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing
SKU: sku-851
Weight: 1.5 kg (3.3 lbs)Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 1000 mA maximumDecoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)Frequency Range: 150 kHz to 230 MHzMains & EUT Connections: BNC 75 ΩRF Connector: BNC 75 ΩRF Input Voltage: 20 Volts MaxStandards Met: IEC 61000-4-6Voltage Division Factor: 10 dB ±1 dB to 80 MHz, 10 dB +3, -2 dB from 80 MHz to 230 MHzVoltage Rating: AC max. voltage (line to ground): 250V; DC max. voltage (line to ground): 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)$1,245.00 -
API Weinshel Fixed Coaxial Attenuator 81-30-33
SKU: 30073
Frequency Range: DC to 10 GHzdB Value: 30 dBAverage Power`: 500 WConnectors: N-Type (f) to N-Type (f)Max. VSWR: 1.9:1Accuracy: 5 ±dBInquire for Availability -
3ctest SG3483 Multiple Waveform Lightning Surge Simulator for IEC 61000-4-5
SKU: sku-605
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Counter: unlimitedOutput: Output waveform 1, 2, 3: 2kV - 20kVPolarity: pos / neg / alternatePulse current (short circuit): 2kV ±10%@50A ±10% 6kV ±10%@150A ±10% 10kV ±10%@250A ±10% 15kV ±10%@375A ±10% 20kV ±10%@500A ±10%Pulse repetition: automatic 2 s – 100 min (Manual and external triggering available)Pulse voltage (open circuit): 2kV ±10% 6kV ±10% 2kV ±10% 10kV ±10% 15kV ±10% 20kV ±10%Standards Met: IEC 61000-4-5Supply Voltage: 220V(±10%)/50Hz -
Com-Power LI-3P-200 Series 3-Phase LISN's with 50/250 uH Inductor, FCC/EN/CISPR, up to 100 A, 150 kHz - 30 MHz
SKU: sku-603
Weight: 27.5 lbs.Application/Test Type: Power Line Conducted Emissions TestsCurrent Rating: up to 100 AmperesDimensions: 19.3” x 13.9” x 2.3"Frequency Range: 9 kHz to 30 MHzInductors: 50 µH or 250 µHInsertion loss: less than 0.7 dBIsolation: more than 40 dBMains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power JackRF Connector: RF Measurement Port 50Ω - N-Type (female)Standards Met: ANSI C63.4, CISPR 16-1-2Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V