Categories
Test Equipment, Systems & Solutions
-
3ctest DFS 4002A Signal / Data Line Failure Simulator DFS
Test Standards: LV 124 / LV 148Power Supply Range: AC 110 V / 220 V±10%, 50/60 Hz±5%Max Power: 200 WDimension: 19”/ 4 UWeight: About 18 KgTemperature: 15-35 ℃Humidity: 45% - 75%Air Pressure: 86 kPa – 106 kPa -
3ctest DMS 200 Differential-Mode Conducted Disturbances
Frequency Range: 2 kHz to 150 kHzMax. Current: 5 AmpsLoad Impedance: 1 Ω, ±0.3 ΩWeight: Approx. 20 kgTest Standards: IEC 61000-4-19INQUIRE -
Frankonia Core-6 EMI Receiver 9 kHz–6 GHz
SKU: 52535
Frequency ranges: 9 kHz – 30 MHz and 30 MHz – 6 GHzFully compliant: acc. to CISPR 16-1-1Fast measurements: by new digital designIntegrated: 20dB pre-amplifierIntegrated pulse limiter: Up to 30 MHzDetectors: Peak, quasi-peak, average, RMS, RMS-average, CISPR-averageAutomatic scan: And manual modeInterface: USB and RS-232 interfacePowerful software: For full-automatic emission measurements including control of turntable and antenna mastsPre-programmed test: runs acc. to CISPR standardsIn Stock -
Schaffner BEST EMC Precompliance Conducted Immunity Test System
SKU: 30069
Applications: EMC Precompliance TestingPeak inrush current capability: 500 A PeakPulse amplitude: Adjustable voltage range: 250 V to 4400 V Voltage amplitude into 50 Ohms: 125 V to 2000 V (± 10%) Voltage amplitude into 1000 Ohms: 250 V to 4000 V (± 20%)Pulse current (short circuit): 125 A to 2000 ATest Standards: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11Additional Test Standards: IEC 61000-4-29Was:$14,500.00$11,900.00In Stock -
DHRA3G Double Ridged Horn Antenna
Frequency Range: 400 MHz - 3 GHzGain: 5.3 - 13.7 dBiVSWR: ≤ 2.5Size (inches): 17.8x14.2x17.7 inNet Weight (oz): 1.623 ozMaterial: Aluminium -
Com-Power CLCE-438 RF Current Monitoring Probe
Top Frequency Range: 400 MHzBottom Frequency Range: 9 kHzApplications: RF Current Monitoring, EMC BCI Tests, Military EMC TestingRF Current Handling (CW/Pulse): 3/800 AmpsTest Standards: DO-160 Section 20, MIL-STD-461AC Current Handling (DC-400Hz): 30/50 AmpsDiameter: 1.5"In Stock -
Schwarzbeck IGU 2912 EMI Calibrator Pulse Generator
SKU: 11414
Calibration Pulse Generator: For EMI-EMC applicationsPulse repetition frequency: 1-200(209) HzPulse shape: Almost rectangularPulse duration: 0.2 nsPulse polarity: Positive/negative (switchable)Pulse level (CISPR weighting QP): 0-60 dBmikroVolt in 1dB stepsMax. output voltage across 50 Ohm: 80V – 110 VCALL FOR LEAD TIME -
3c-test 7637-4R500/120 Load Resistor Isolation Capacitor Shielded Enclosure
SKU: 21971
Port of Front Panel: DC port, LISN portPort of Rear Panel: Resistor, capacitor short circuit outputShielded Effect: ＞80 dBAmbient Temperature: 15 ℃~35 ℃Relative Humidity: 45% ~ 75%Atmospheric Pressure: 86 kPa ~ 106 kPaDimension: 736 mm（L）×345 mm（W）×255 mm（H）Weight: Approx. 17.6 kgMaterial: AluminumIn Stock -
Fischer FCC F-2031-A-DCN-32mm Decoupling Ferrite Tube
SKU: sku-2320
Application/Test Type: ferrite decoupling clampAperture: 32mmFrequency Range: 100 kHz - 100 MHzStandards Met: IEC/EN 61000-4-6Inquire -
PA26G K Band Preamplifier 18 GHz - 26.5 GHz
SKU: 8298
Frequency Range: 18 GHz - 26.5 GHzGain: 30 dBNoise Figure: 6.0 dBRF Input Damage Level: +20 dBmInput/Output Return Loss: 10 dBPower Supply (AC Adapter Provided): 100 VAC min to 240 VAC maxInput/Output Connector Type: 2.92 mm (F)AC to DC power converter: 2.5 mm DC Jack (power converter included)In Stock -
10µHz–1MHz Versatile High Performance Gain/Phase Frequency Response Analyzer
SKU: 5526
Frequency Range: 10 µHz to 1 MHzConnectors: Isolated BNCMax Input: 100 VpkInput Impedance: 1M // 50pF (exc. leads)Signal Generator Impedance: 50 Ω ±2%Applications: Conducted Emissions$950.00 - $9,500.00In Stock -
GTEM 450 Cell for Radiated Immunity & Emissions Testing up to 20 GHz
SKU: 12297
Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20CALL FOR LEAD TIME