Categories

Test Equipment, Systems & Solutions

EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave

SKU: 10413

Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHz

Damping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value

Oscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%

Source Impedance: 50 ohm ±20%

Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%

Burst Duration: At least 2s

Damping Rate-2: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value

Fast Damped Oscillatory Waves: As Per EN/IEC 61000-4-18

Frequency: 100 kHz ± 10%

General Data: Technical Details

Impedance: 12ohm and 30ohm ± 20%

Oscillation Frequency-2: 100kHz and 1MHz ± 10%

Peak current: Max. 500A @ 12ohm or Max. 200A @ 30ohm internally;

Polarity-2: Positive, negative

Pulse repetition: 1 to 60 transients per minute

Repetition Rate: Max. 5,000 /s ±10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Source impedance: 200ohm ± 20%

Spike frequency: 100kHz ± 10%

Test Voltage: 250 V - 6,000 V ± 10%

Equipment Group: Ring Wave Generators/Simulators

Inquire

View Product Cart
3ctest SG 5010H 10kV Surge Simulator for IEC 61000-4-5, GB/T, ITU-T K21/K44

SKU: sku-326

Polarity: +/-, positive first or negative first

Weight: Approximately 300 kg

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

Coupling: 1 or 3 Phase 16 Amps 250V/450V

Impedance: 500Ω±10％

Input voltage UIN: AC220V±10%，50/60H

Output Current: 10/700 and 5/320±20%μs

Polarity-2: +/-, positive first or alternate

Pulse current (short circuit): 150A - 3kA/5kA (±10%)

Pulse voltage (open circuit): 300V - 6kV/10kV (±10%)

Standards Met: EN/IEC 61000-4-5, IEC 61643-1, GB/T 17626.5m GB/T 16927.1, ITU-T K21 and ITU-T K44

Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

Test duration: Voltage - 50μs(±20%); Current - 20μs(±20%)

Test Voltage: 300V～6Kv/10kV （±10%)

Transfer Impedance: 15Ω、40Ω（25+15Ω

View Product Cart
Teseq ISN S752 Impedance Stabilization Network for Coaxial Lines

SKU: sku-174

Weight: approx. 1.5 kg

Dimensions: (W x H x D): 100 mm x 100 mm x 240 mm

Frequency Range: 150 kHz to 230 MHz

Impedance: 150 Ω ±20 Ω

RF Input Voltage: 20 V

View Product Cart
QRHA4G-OB Dual Polarized Quad Ridged Open Boundary Antenna

SKU: 12343

Frequency Range: 1 - 4 GHz

Isotropic Gain: 8 dBi

Port Isolation: 20 dB

Applications: Antenna Pattern Measurements, Emissions

Cost New:

Was:

Price Now:

$4,650.00

Inquire for Availability
ETS-Lindgren (EMCO) 3107B E-Field Generating Antenna

SKU: 2187

Applications: Radiated Susceptibility

Dimensions: 72.5" x 24" x 2.0" (L x W x H)

Frequency Range: 10 kHz - 30 MHz

Built in Load: No

Max. Radiated Field Strength: 100 V/m

Max. Power Capability: 1000 W

Connector: N-Type

1 Unit Left

View Product Cart
ETS-Lindgren HI-6005 Electric Field Probe

SKU: sku-1294

Application/Test Type: Radiated Immunity

Field Strength Range: 0.5 to 800 V/m

Frequency Range: 100 kHz to 6 GHz

Standards Met: IEC 61000-4-3

Interfaces: Fiber Optic

Battery Life: 10 Hours

View Product Cart
Teseq ITS 6006 Radiated Immunity Test System

SKU: 11290

Frequency Range: 80 MHz to 6 GHz

Input: External AM input: BNC socket, impedance more than 10 kΩ External PM input: BNC socket, TTL

Output: Generator outputs: 4x N sockets 50 Ω, 80 MHz to 6 GHz Interlock outputs: 4x BNC sockets External PM output: BNC socket, TTL, impedance more than 1.2 kΩ 10 MHz reference output: BNC socket, approx. 0 dBm/50 Ω

Reference frequency: 10 MHz

Applications: RF/Radiated Immunity & Susceptibility Testing

Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20

Cost New:

Was:

Price Now:

$18,000.00

In Stock
Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5

SKU: 30150

Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]

Current Rating: 800 mA (per line), 1.6 Amps (per pair)

Dimensions: see photo in images

Frequency Range: 150 kHz to 30 MHz

Isolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB

Mains & EUT Connections: D-sub 25 pin female connectors

RF Connector: 50Ω N-type (female)

Standards Met: CISPR 16-1-2, CISPR 22

Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)

Cost New:

Was:

Price Now:

$410.00

Typically in Stock

Ordering Options
3ctest SPN Series CDN's for Lightning Surge, Single Phase 3-wire, Three Phase 5-wire

SKU: sku-563

Weight: approx. 50Kg

Dimensions: 19 inch/6U

Impedance: 2 ohm (output)

Polarity: +/-/alternative

Voltage: 0.2kV–6kV，±10%

Inquire for Availability

View Product Cart
EM Test Automotive Transient Emission Set for ISO 7637-2

SKU: 30011

Applications: EV and Automotive

Test Standards: ISO 7637-2

Includes: AN 200N100 Artificial Network, BS 200N100.1 Electronic Switch, and BSM 200N40 Mechanical Switch (see specs in Overview)

Inquire for Availability

View Product Cart
Rent Amplifier Research AR 25A250AM6 1-300 MHz, 25 Watt RF Power Amplifier

SKU: 11305

Max Frequency: 250 MHz

Min Frequency: 9 kHz

Output Power: 25 Watts

Applications: RF Conducted Immunity, Medical

Standards: IEC 61000-4-6, MIL-STD 461 CS114

AC Input Power: 90-270V/1PH/200VA

Gain: 47dB

Cost New:

Was:

Price Now:

$195.00

Ordering Options
Teseq AES 5501 Automotive Emissions System

SKU: 10177

Test Standards: ISO 7637-2

Operating Voltage: 60 VDC

Operating Current: 100 Amps Max

Suppression Voltage: 1,300 Volts Typ.

Max Inrush Current: 300 Amps

Applications: EMC Testing on EV - Electric Vehicles, Batteries, and Charging Stations

Inquire for Availability

View Product Cart

Test Equipment, Systems & Solutions

Connect with The EMC Shop