Test Equipment, Systems & Solutions

• 

  3ctest VMT/VVT/MFT Voltage Variation / PFMF

  SKU: sku-1090

  VIEW PRODUCT Cart

• 

  Amplifier Research ATH400M1G 400 MHz – 1 GHz High Gain Horn Antenna

  SKU: 11927

  Weight: 9.1 kg (20 lbs)

  Beamwidth: Typical curves available on request

  Connector: 1 5/8 EIA flange

  Dimensions: 56.4 x 79.3 x 73.7 cm (22.2 x 31.2 x 29.0 in)

  Frequency Range: 400–1000 MHz

  Gain: 10dB minimum, typically increasing to 15dBi at 1000MHz

  Impedance: 50 ohms nominal

  Mounting Provisions: Rear flange for wall mount Pads with ¼ - 20 thread for tripod mount

  VSWR: 2.5:1 maximum 1.5:1 average

  INQUIRE

  VIEW PRODUCT Cart

• 

  EM Test MPG 200 Automotive Micropulse Generator up to 1.1 kV, built in CDN 60V/25A DC

  SKU: 11818

  Applications: Automotive Electrical Disturbances, EV EMC Testing

  Standards Met: ISO 7637

  Max EUT DC Voltage (w/ Built In CDN): 60 Volts

  Max EUT DC Current (w/ Built In CDN): 25 Amps

  Peak Inrush Current Capability: 50 Amps

  Pre-Programmed Pulses: ISO 7637-2 (Pulse 1 and 6) "Output=DUT supply +/- Safety laboratory connectors Coupling To the battery +line Decoupling Via diode and battery supply switch DUT supply Max. 60V/25A"

  Input: 115/230V +10/-15%

  Repetition rate: 300us ± 10% (10 - 10%)

  Test voltage: Test Voltage up to 1,100V and GOST PULSE 1B (24V), ISO PULSE 6 (12V/24V)

  Cost New:

  Was:

  Price Now:

  $875.00 - $4,500.00

  In Stock

  ORDERING OPTIONS

• 

  3ctest APS 60C30D Four Quadrants, Double Polarity, Voltage Drop Simulator & DC Voltage Source Package

  SKU: sku-740

  Input: External signal input: 0 ~ ±10v

  Output: Single polarity output: 0~60V

  Rise time: 10us(resistive load)

  Source Impedance: 10mΩ

  VIEW PRODUCT

• 

  Fischer Custom Communications FCC-LISN-5-50-2-01-DO-160F, 5 uH, 50 Amp, 2 Line LISN for DO-160F

  SKU: 10736

  Application/Test Type: DO-160F Tests

  Current Rating: 50 Amperes

  Frequency Range: 50 - 800Hz

  Inductors: 5 µH

  Mains & EUT Connections: Multi-Contact Safety Socket

  RF Connector: Multi-Contact Safety Socket

  Standards Met: DO-160F

  Voltage Rating: DC -1200V 60Hz - 800V 400Hz - 400V 800Hz - 230V

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Haefely PET 4000 (249997) ESD Calibration Set for IEC/EN 61000-4-2 w/ 20dB Attenuator

  SKU: sku-681

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq C5 I Compliance Immunity Software

  SKU: sku-586

  VIEW PRODUCT Cart

• 

  Teseq PA 5840 Power Amplifier/Battery Simulator for ISO 7637

  SKU: 10492

  Applications: Automotive EMC Testing, Electric Vehicle Compliance Testing

  Automotive EMC Standards: ISO 7637-2, ISO 16750-2

  Bandwidth: up to 150 kHz

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq PA 5740 Power Amplifier/Battery Simulator for ISO 7637

  SKU: 10491

  Standards Met: ISO 7637-2, ISO 16750-2

  Applications: Automotive EMC Testing, Electric Vehicle Compliance Testing

  Bandwidth: up to 180 kHz

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  EM Test CN 200N1 Audio Transformer Assembly for LF Conducted Immunity Testing

  SKU: sku-481

  VIEW PRODUCT Cart

• 

  EM Test AMP 200N Low Frequency Signal Source DC (0Hz) to 250kHz

  SKU: sku-480

  Weight: Approx. 18kg

  Amplifiers: low-frequency signal source with amplifier

  Dimensions: 19", 3HU (500mm x 449mm x 133mm)

  Frequency range: DC - 250kHz

  General Data: Technical Details

  Harmonic Distortion (THD): less than 0.1%

  Operating Temperature: 10°C - 40°C

  Output current: Max. 5Arms up to 200kHz Max. 4Arms 200kHz - 250kHz

  Output Impedance: 30 mOhm @ 1 kHz

  Output voltage: 50Vrms, max. 140V(p-p) up to 100kHz 30Vrms 100kHz - 250kHz

  Protection: - Short circuit - Overtemperature

  Signal power: 250W (nominal)

  Supply Voltage: 115 V +10/-02%, 50/60 Hz or 230 V +10/-15%, 50/60 Hz

  VIEW PRODUCT Cart

• 

  EM Test VDS 200Q Four Quadrant Battery Supply Simulator and DC Voltage Source

  SKU: sku-478

  VIEW PRODUCT Cart