Categories

Test Equipment, Systems & Solutions

EM Test ACC Capacitive Coupling Clamp for ISO 7637 Automotive Testing

SKU: sku-635

Weight: 11.5 kg

Application/Test Type: Electrical Fast Transients for automotive applications

Cable Diameter: up to 40 mm (1.57 in)

Coupling Length: 1 m (39.4 in)

Dimensions: 1250 mm x 300 mm x 93 mm, L x W x H

RF Connector: High voltage connector,coaxial. GND connection 4 mm plug, banana

Standards Met: ISO 7637

Voltage Rating: up to 1.0 kV

Inquire for availability

View Product Cart
3ctest CCC100 EFT/Burst Coupling Clamp for IEC/EN 61000-4-4

SKU: 10621

Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

Cable Diameter: up to 40 mm (1.57 in)

Coupling Length: 1 m (39.4 in)

Dimensions: 1040x140x110mm

EFT Coupling Clamps: as per IEC 61000-4-4

RF Connector: High voltage connector,coaxial. GND connection 4 mm plug, banana

Standards Met: IEC/EN 61000-4-4

Voltage Rating: up to 5.5kv

4 to 6 Weeks

View Product Cart
Haefely PSURGE 4010 Combination Wave Generator

SKU: 10574

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

Coupling: Internal Single Phase/16 Amps at 264 VAC and 110 VDC -(expandable to 3-Phase with external module); 18uF and 9uF+10 Ω acc. to IEC 61000-4-5

Polarity: positive, negative, alternating

Pulse current (short circuit): 100 Amps to 2.1 kA

Pulse repetition: up to 12 per minute

Pulse voltage (open circuit): 200 Volts to 4.2 kV

Standards Met: IEC 61000-4-5, EN 61000-6-1, EN 61000-6-2

Industries: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Applications: Immunity to Electrical Surges (Test Setup)

Typically In Stock

View Product Cart
Com-Power AM-741R Active Monopole Antenna with RAI-100, 9 kHz - 60 MHz

SKU: AM-741R, RAI-100

Weight: 9.5 lbs. [4.3 kg]

Antenna Factor (1 Meter): ±0.5 dB

Antennas: Monopole Antennas

Application/Test Type: radiated emissions measurements, typically below 30 MHz.

Connector: BNC (female)

Frequency Range: 9 kHz to 30 MHz (useable to 60 MHz)

Gain: See Image Thumbnail

Impedance: 50 Ohms

Mounting Base: 1/4" 20 thread

Standards Met: Mil-STD 461,DO-160

Cost New:

Was:

Price Now:

$299.99

Typically In Stock

Ordering Options
Com-Power CGC-255E Comb Generator 50 kHz - 400 MHz in 50 kHz/250 kHz steps

SKU: 11431

Weight: 1 lbs / 0.5 kg

AC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz

Application/Test Type: Reference Signal Source for LISN verification

Battery: 6V NiMH, 1 Ah

Dimensions: 5 x 2.2 x 2.2 inches / 13.2 x 5.9 x 5.9 cm

Frequency Range: 50 kHz to 400 MHz in 50 kHz or 250 kHz steps

Mains & EUT Connections: LISN Interface Plug NEMA 15-P type

Operation Time: 18 Hours Typical With Fully Charged Battery

Inquire for Availability

View Product Cart
Haefely AXOS 8 7kV Surge & EFT Generator

SKU: 10405

Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

Transient EMC Standards: IEC/EN 61000-4-4, IEC/EN 61000-4-5

Power Fail EMC Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29

Max EUT AC Voltage (w/ Built in CDN): 264 Volts

Max EUT AC Current (w/ Built in CDN): 16 Amps

Peak inrush current capability: 500 A (at 230 V)

External Coupling: Data Lines (EFT & Surge), 3PH EUT

Outputs: 4 mm banana socket

Inquire for Availability

View Product Cart
Narda PMM COND-IS/10 RF Conductive Immunity Test System

SKU: 11334

Test Capabilities: RF Conducted Immunity

Standards Met: IEC/EN 61000-4-6

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

CDN Test Levels (w/ built-in amplifier): 10Vrms

BCI Test Levels (w/ built-in amplifier): 3V

Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

Typically In Stock

View Product View Product
Thermo Keytek ECAT Transient Generator System

SKU: 11321

Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.

Pulse repetition: 1 shot/9 seconds

Pulse voltage (open circuit): 200V - 6.6kV ± 10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864

In Stock

View Product Cart
Rent Rohde & Schwarz ESU40 EMI Test Receiver for CISPR and MIL-STD Testing

SKU: 30082

Frequency Range: 20 Hz to 40 GHz (DC coupled), 10 MHz to 40 GHz (AC coupled)

Frequency Resolution: 0.01 Hz

Frequency Counter Resolution: 0.1 Hz to 10 kHz

Test Standards: CISPR 16-1-1, MIL-STD-461

Applications: Conducted Emissions, Radiated Emissions

Inquire for Lead Time

View Product Cart
Teseq LNA 6000 Low Noise Amplifier 1 MHz to 3 GHz

SKU: sku-80

Weight: approx. 127 grams (0.3 Lb's)

Application/Test Type: Increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments.

Dimensions: 28 mm x 95 mm x 27 mm

Frequency Range: 1 MHz to 3 GHz (nominal range) 200 kHz to 4 GHz (utilizable range)

Gain: 12.5 dB (±0.3 dB flatness)

Input: 0 dBm (107 dBμV)

Maximum Continuous Power: 12.5 dBm @ 1 dB compression

RF Connector: IN: N-type (f); OUT: N-type (m)

Inquire for Availability

View Product Cart
Pearson 411 Surge Current Monitor up to 5kA Peak Current, 1Hz to 20 MHz

SKU: P-411

AC Current Handling (DC-400Hz): 50 Amps

RF Current Handling (CW/Pulse): 50/5,000 Amps

Style: Fixed Window

Diameter: 0.5"

Transfer Impedance: 1 Ohm

Test Standards: IEC 61000-4-5

Frequency Range: 1 Hz to 20 MHz

SEVERAL IN STOCK

View Product Cart
Teseq MD 101 ESD Pulse Measurement Target

SKU: sku-33

Inquire for Lead Time

View Product Cart

Test Equipment, Systems & Solutions

Connect with The EMC Shop