Categories

Test Equipment, Systems & Solutions

EM Test CNI 503 3-Phase Coupling Decoupling Network

SKU: 3450

Applications: Conducted Immunity

Test Standards: IEC 61000-4-4, IEC 61000-4-5, EN/IEC 61000-4-12

EUT Supply: 3x480V, 16A AC

Burst: 5.5 kV

Surge: 5 kV

Model: CNI 503A

In Stock

View Product Cart
Schwarzbeck NNLK 8130 Line Impedance Stabilization Network

SKU: 8733

Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

Test Standards: ISO 60601-1-2

Additional Test Standards: CISPR 16-1-2, FCC Part 15

Frequency Range: 150 kHz to 30 MHz

Impedance: 50 µH || 50 Ω

Max. Voltage with Option 400/700 B: 400 VAC 50/60 Hz; 630 VDC

Typically In Stock

View Product Cart
Schwarzbeck NTFM 8131 2-Wire Impedance Stabilisation Network, 9 kHz - 30 MHz

SKU: 11141

Test Standards: CISPR 32, CISPR 15/EN 55015

Max Voltage: 400 Volts AC

Max Current: 3 Amps

Impedance: 150 Ω ±20 Ω

EUT/AE Connections: 4 mm jacks

Frequency Range: (9 kHz) 150 kHz - 30 MHz

Inquire for Availability

View Product Cart
Haefely PEFT 4010 EFT/Burst Simulator for IEC/EN 61000-4-4

SKU: 1909

Test Capabilities: Electrical Fast Transient Immunity

Standards Met: IEC/EN 61000-4-4

Applications: EMC Precompliance Testing

Max EUT AC Voltage (w/ Built in CDN): 250 Volts

Max EUT AC Current (w/ Built in CDN): 16 Amps

Max EUT DC Voltage (w/ Built in CDN): 110 Volts

Max EUT DC Current (w/ Built in CDN): 16 Amps

EFT/Burst Pulse Output Capability: 5 kV

External Coupling: Data Lines & 3 Phase EUT

Cost New:

Was:

Price Now:

$895.00 - $6,500.00

In Stock

Ordering Options
3ctest EDS 20H Hand-held 20kV Electrostatic Discharge ESD Simulator

SKU: 3209

Air Discharge Voltage Range: 1,000 Volts to 20,000 Volts ±5%

Contact Discharge Voltage Range: 1,000 Volts to 20,000 Volts ±5%

Display Monitor: LCD 128 x 64

Holding Time: Greater than 5 seconds

Polarity: positive, negative, alternating

Standards Met: IEC/EN 61326, IEC/EN 61000-6-1, IEC/EN 61000-6-2

Additional Standards Met: IEC 61000-4-2, IEC 61326

Additional Standards Met: ISO 10605, ITU-TK.20, GB/T 17626.2

IN STOCK

View Product Cart
Boonton 4232A 2 Channel RF Power Meter

SKU: 30075

Measurement Range: 10 kHz to 100 GHz

Dynamic Range: 90 dB (sensor dependent)

Power Measurement Range: -70 dBm to +44 dBm

Applications: Radiated Immunity, RF Conducted Immunity

Channels: 2

Typically in Stock

View Product Cart
Com-Power LI-325C Line Impedance Stabilization Network

SKU: 10891

Application/Test Type: Power line conducted emissions tests

Current Rating: 25 Amps (AC), 17 Amps (DC)

Dimensions: 13 x 7.5 x 8 inches / 33 x 19 x 20 cm

Frequency Range: 10 kHz to 400 MHz

Inductors: 5 µH (air-core)

Insertion Loss: 0.3 dB (150 kHz to 30 MHz)

Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets

RF Connector: 50Ω N-type (female)

Standards Met: RTCA DO-160, MIL-STD-461 LISNS

Voltage Rating: 270 VAC (Line to Ground), 380 VDC

Inquire for Availability

View Product Cart
Teseq CDN T8 Coupling/Decoupling Network for RJ 11, RJ45 PoE 1Gbps Testing

SKU: sku-862

Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω

Current Rating: 500mA (line), 1.2A (pair)

Decoupling of Common Mode Disturbance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 80 MHz: 150 Ω +60 Ω / -45 Ω

Frequency Range: 150 kHz to 230 MHz

Mains & EUT Connections: 50 Ohm Female BNC

RF Connector: 50 Ω BNC (Female)

RF Input Voltage: 15 Volts Max

Standards Met: IEC / EN 61000-4-6

Voltage Division Factor: 9.5 dB ±1 dB

Voltage Rating: 63 V AC / 100 V DC (Line to Ground)

View Product Cart
TDK EFG-03 High Power E-Field Generator 10 kHz - 100 MHz, up to 500 V/m

SKU: 9091

Weight: 68 kg (150 lbs.)

Connector type: 7/16 female

Test Standards: MIL-STD-461 RS103, DO-160

Applications: Radiated Susceptibility

Built in Load: Yes

Max Radiated Field Strength: 500 V/m

Typically In Stock

View Product Cart
EM Test LD 200N Load Dump Generator for ISO 16750-2

SKU: 5955

Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30A

Freestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohm

Test Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much more

Test Routines: Quick Start, User Defines Routines, Standards Test Routines Service

Cost New:

Was:

Price Now:

$1,690.00 - $2,290.00

Typically In Stock

Ordering Options
Amplifier Research AR 15S1G6, 15 Watt, 0.7 GHz – 6 GHz, RF Power Amplifier

SKU: sku-703

Weight: 15.9 kg (35 lbs)

Dimensions: 50.3 x 15.5 x 37.6 cm 19.8 x 6.1 x 14.8 in

Flatness: ±1.5 dB typical; ±2.0 dB maximum

Frequency Range: 0.7–6GHz instantaneously

Gain: GAIN (at maximum setting): 43 dB minimum GAIN ADJUSTMENT (Continuous Range): 10 dB minimum (4096 steps remote)

Impedance: 50 ohms

Input: 90-132, 180-264 VAC; 50/60 Hz, single phase; 210 watts maximum

Output: POWER OUTPUT @ 3dB COMPRESSION: Nominal, 20 watts; Minimum, 15 watts POWER OUTPUT @ 1dB COMPRESSION: Nominal, 15 watts; Minimum, 12 watts

RF Connector: Type N female

RF Input Voltage: 1.0 milliwatt maximum for rated output

Inquire for availability

View Product Cart
Com-Power PS-500 RF Near Field Probe Kit, 9 kHz - 5 GHz

SKU: 5785

Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

Test Standards: CISPR, MIL-STD-461, FCC

H-Field Loop Frequency Range: 9 kHz - 5 GHz

E-Field Broadband Frequency Range: 50 kHz - 5 GHz

E-Field Fine Tip Frequency Range: 100 kHz - 5 GHz

Contact Tip Frequency Range: 400 Hz - 5 GHz

Connectors: BNC (f)

Impedance: 50 Ω

Cost New:

Was:

Price Now:

$49.00 - $740.00

In Stock

Ordering Options

Test Equipment, Systems & Solutions

Connect with The EMC Shop