RF Test Equipment

RF Test Equipment

• 

  Teseq FT 801 Ferrit Tube EM Decoupling Clamp, 150 kHz to 1 GHz, 35 mm Cable Diameter

  SKU: sku-673

  Weight: approx. 8 kg

  Application/Test Type: decoupling network (ferrite tube) for immunity test according to IEC / EN 61000-4-6

  Dimensions: 670 mm x 70 mm x 80 mm

  Frequency Range: 150 kHz to 1000 MHz

  Max. Cable Diameter: 35 mm

  VIEW PRODUCT Cart

• 

  Tektronix DPO4054 Digital Oscilloscope, 4 Channels, 500 MHz

  SKU: 30047

  Bandwidth: 500 MHz

  Channels: 4

  Maximum Waveform Capture Rate: 3,700 wfms/s

  Sample Rates: Up to 5 GS/s on All Channels

  Applications: How to Capture an Electrical Transient Using an Oscilloscope, EMC Precompliance Testing

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq PMU 6003 USB Power Meter/Sensor 9 kHz - 3 GHz

  SKU: sku-606

  Current rating: 100 mA at 5 V

  Frequency Range: 9 kHz – 3 GHz

  RF Connector: N male 50 Ω

  Standards Met: IEC/EN 61000-4-3 IEC/EN 61000-4-6

  Supply Voltage: min. 4.7 V / max. 9 V

  VIEW PRODUCT Cart

• 

  AH Systems SAC-40G-1.5 RF Cable, Up to 40 GHz, 2.9mm Cable Connectors, 1.5 Meter Length

  SKU: sku-569

  RF Connector: 2.9mm

  VIEW PRODUCT

• 

  Keysight N5183A Microwave Analog Signal Generator

  SKU: KEY-N5183A

  Frequency Range: 100 kHz - 20, 32 or 40 GHz

  Options: Mechanical attenuator, fast switching speed

  Includes: 2.92mm Adapter, Power Cord, Calibration

  Frequency Resolution (0.01Hz): -107dBc/Hz at 20kHz offset from 3GHz carrier

  Interfaces: GPIB, LAN, USB and others

  Cost New:

  Was:

  Price Now:

  $1,475.00

  Multiple Configurations In Stock

  ORDERING OPTIONS

• 

  Rohde & Schwarz SMA100A-B106L 9 kHz to 6 GHz Signal Generator w/ Opt B81

  SKU: 7213

  Frequency Range: 9 kHz to 6 GHz

  Connector: BNC Female

  Source Impedance: 50 Ω (nom.)

  Input Level Range: –6 dBm, ≤ 19 dBm

  Input Voltage: –10 V to +10 V

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Com-Power CLA-150 32mm Absorbing Clamp CISPR 14

  SKU: 1551

  Test: CISPR 14

  Application/Test Type: Conducted Emissions, Radiated Emissions

  Clamp factor (CF): -3 dB to +4 dB

  Dimensions: 627 x 114 x 165 mm (24.7 x .4.5 x 6.5 inches)

  Frequency Range: 30 MHz to 1000 MHz

  Inquire for Availability

  VIEW PRODUCT

• 

  Keysight (Agilent) N9038A-526 MXE EMI Receiver, 3 Hz to 26.5 GHz

  SKU: 10063

  Frequency Range: 20 Hz - 26.5 GHz

  Resolution: 2 Hz

  Bandwidth accuracy (–3.01 dB): 1 Hz to 1.3 MHz ± 2 % (nominal)

  Dynamic Range: > 70 dB

  Amplitude Accuracy: < ± 2.7 dB

  Typically In Stock

  VIEW PRODUCT Cart

• 

  AH Systems SAC-210 RF Cable Up to 5 GHz, BNC(m) to BNC(m)

  SKU: sku-234

  RF Connector: BNC(m) to BNC(m), RG-58

  VIEW PRODUCT

• 

  Boonton 57006 Peak Power Sensor 500 MHz - 6 GHz

  SKU: 10962

  • Fast measurement speed

  • Wide dynamic range (-50 dBm to +20 dBm)

  • Calibration factors, linearity and temperature compensations data stored in EEPROM

  • Excellent SWR for reducing mismatch uncertainty

  • Accurate calibration and unique traceability to NIST

  Cost New:

  Was:

  Price Now:

  $595.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Anritsu 68369B 10 MHz – 40 GHz Signal Generator

  SKU: 10637

  • 10 MHz to 40 GHz Frequency Range

  • Configured with Options 2B & 11

  • Discrete CW and swept frequency capability

  • Calibration certificate with data provided

  • Remote control via IEEE-488 (GPIB)

  Cost New:

  Was:

  Price Now:

  $1,750.00

  Typically n Stock

  ORDERING OPTIONS

• 

  Anritsu S810D SiteMaster Cable and Antenna Analyzer

  SKU: 8865

  Frequency Range: 0.025 GHz to 10.5 GHz

  Output Power: <0 dBm (at any frequency)

  Measurement Accuracy: ≥42 dB corrected directivity after calibration for <5 GHz, ≥36 dB corrected directivity after calibration for <15 GHz, ≥32 dB corrected directivity after calibration for >15 GHz

  Applications: VSWR, return loss, cable loss, and distance-to-fault (DTF) analysis

  Cost New:

  Was:

  Price Now:

  $975.00

  In Stock

  ORDERING OPTIONS